• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.333-334
• /
• 2014

Converters employing IGCTs usually require di/dt snubber and Over Voltage Protection (OVP) circuit for the protection of IGCTs and fast diodes. In these IGCT-based converters, conventional di/dt snubber and OVP circuit dissipates a significant amount of power loss. To reduce this loss of conventional di/dt snubber and OVP circuit, this paper proposes a flyback type snubber circuit with di/dt limiting characteristic for IGCT-based converters in medium voltage wind turbines. This flyback type snubber circuit simply consists of a flyback type transformer and diode. The proposed circuit reduces loss and simplifies conventional di/dt snubber by adopting the flyback type transformer. Loss analysis of conventional di/dt snubber and OVP circuit is performed for the 3-level NPC type back-to-back VSC supplied from grid voltage of 6.9kV. The proposed flyback type snubber circuit can save the loss of conventional snubber circuit in the 3L-NPC type back-to-back VSC in multi-MW MV wind turbine. The proposed snubber circuit has a fewer number of components and improved efficiency leading to a reliable and efficient wind turbine systems.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.4
• /
• pp.137-142
• /
• 2023

When designing a SMPS(Switched Mode Power Supply) circuit, a part that is easily overlooked without special consideration is a snubber circuit. However, the performance degradation of the SMPS due to the snubber circuit and the effect on the entire SET cannot be ignored. In addition, a snubber circuit is added to both ends of the switch to protect the device from peak voltage and current during switching and to reduce loss during on/off switching. Therefore, in this paper, for a sufficient understanding of snubber circuits, theoretical analysis and experimental formulas that can be applied by designers during actual circuit design are arranged to promote optimization of snubber circuits.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.541-546
• /
• 1998

This paper proposes a new snubber circuit for multilevel inverter and converter. The snubber circuit makes use of Undeland snubber as basic snubber unit and can be regraded as a generalized Undeland snubber. The proposed snubber keeps such good features as fewer number of components, improved efficiency due to low loss snubber, capability of clamping overvoltage across main switching devices, and no unbalance problem of blocking voltage. Furthermore, the proposed concept of constructing a snubber circuit for multilevel inverter and converter can apply to any kind of basic snubber unit such as Holtz nondissipative snubber, McMurray efficient snubber, Lauritzen lossless snubber, etc which have been utilized for two-level inveter.

• Proceedings of the KIEE Conference
• /
• 1998.07f
• /
• pp.1928-1930
• /
• 1998

This paper proposes a new snubber circuit for multilevel inverter and converter. The snubber circuit makes use of Undeland snubber as basic snubber unit and can be regarded as a generalized Undeland snubber. The proposed snubber keeps such good features as fewer number of components, improved efficiency due to low loss snubber, capability of clamping overvoltage across main switching devices, and no unbalance problem of blocking voltage. Furthermore, the proposed concept of constructing a snubber circuit for multilevel inverter and converter can apply to any kind of basic snubber unit such as Holtz nondissipative snubber, McMurray efficient snubber, Lauritzen lossless snubber, etc which have been utilized for two-level inverter.

• Proceedings of the KIPE Conference
• /
• 2000.07a
• /
• pp.448-451
• /
• 2000

This paper proposed a snubber circuit for flying capacitor multilevel inverter and converter. The proposed snubber circuit makes use of Undeland snubber as basic snubber as basic snubber unit and has such an advantage of Undeland snubber used in the two-level inverter. Comparing conventional RCD/RLD snubber for multilevel in verter and converter the proposed snubber keeps such a good features as fewer number of components improved efficiency of system due to low loss snubber and reduction of voltage stress of main switching devices due to low overvoltage. Furthermore the proposed concept of constructing a snubber circuit for flying capacitor 3-level inverter and converter can apply to any level of them. In this paper the proposed snubber applies to three-level flying capacitor inverter and demonstrates its feature by computer simulation and experimental result.

• Smart Structures and Systems
• /
• v.25 no.3
• /
• pp.385-391
• /
• 2020

In this paper, a new passive lossless snubber circuit with energy transfer capability is proposed. The proposed lossless snubber circuit provides Zero-Current Switching (ZCS) condition for turn-on instants and Zero-Voltage Switching (ZVS) condition for turn-off instants. In addition, its diodes operate under soft switching condition. Therefore, no significant switching losses occur in the converter. Since the energy of the snubber circuit is transferred to the output, there are no significant conduction losses. The proposed snubber circuit can be applied on isolated and non-isolated converters. To verify the operation of the snubber circuit, a boost converter using the proposed snubber is implemented at 70W. Also, the measured conducted Efficiency Electromagnetic Interference (EMI) of the proposed boost converter and conventional ones are presented which show the effects of proposed snubber on EMI reduction. The experimental results confirm the presented theoretical analysis.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.49 no.9
• /
• pp.598-606
• /
• 2000

This paper proposes a new snubber circuit for 4-level inverter and converter. The snubber circuit makes use of Undeland snubber and McMurray efficient snubber as basic snubber unit and can be regarded as a generalized combined Undeland and McMurray efficient snubber. The proposed snubber keeps such good features as fewer number of components improved efficiency due to low snubber loss capability of clamping overvoltage across main switching devices and no unbalance problem of blocking voltage. Furthermore the proposed concept of constructing a snubber circuit for 4-level inverter and converter can apply to any level of converterand inverter.

• Proceedings of the KIPE Conference
• /
• 1997.07a
• /
• pp.124-130
• /
• 1997

The main switch of high-frequency boost converter may be failed because the high switching current or voltage can damage this switch. The high switching stress can be reduced by snubber circuit. In this paper, a new passive snubber circuit which can recover trapped snubber energy without added control is proposed for boost converter. The control of boost converter with proposed snubber is the same as the conventional one. In addition, the energy recovery circuit can be implemented with a few passive components. The analysis for proposed circuit is presented, and the validity of the circuit is verified through simulation and experiment.

• Proceedings of the KIPE Conference
• /
• 1998.07a
• /
• pp.255-259
• /
• 1998

This paper is proposed three phase GTO PWM Inverter with energy recovery snubber circuit. The proposed energy recovery snubber circuit effective in reduction of the power loss in the Inverter system than asymmetry GTO snubber circuit.

• Journal of Advanced Marine Engineering and Technology
• /
• v.21 no.2
• /
• pp.178-185
• /
• 1997

According to the wide - spread use of rectifier in electronic equipments, such problems as electronic components failures or equipment disorders have been occurred due to current harmonics. To overcome these problems, power factor correction circuits employing boost converter have been used. The high switching stress of boost converter can be reduced by snubber circuit. Recently, research activities in snubber circuits have been directed to energy recovery snubber for improving the efficiency of power converter. In this study, a new passive snubber circuit which can recover trapped snubber energy without added control is proposed for boost converter. The control of boost converter with proposed snubber is the same as the conventional one. In addition, the energy recovery circuit can be implemented with a few passive components. The circuit operation is confirmed through simulation.