• Journal of Integrative Natural Science
• /
• v.12 no.4
• /
• pp.105-115
• /
• 2019

In this paper, a prediction system is proposed to control the brightness of smart street lamps by predicting the moving path through the reduction of consumption power and information of pedestrian's past moving direction while meeting the function of existing smart street lamps. The brightness of smart street lamps is adjusted by utilizing the walk tracking vector and soft hand-off characteristics obtained through the motion sensing sensor of smart street lamps. In addition, the motion vector is used to analyze and predict the pedestrian path, and the GPU is used for high-speed computation. Pedestrians were detected using adaptive Gaussian mixing, weighted difference imaging, and motion vectors, and motions of pedestrians were analyzed using the extracted motion vectors. The preprocessing process using linear interpolation is performed to improve the performance of the proposed prediction system. Fuzzy prediction system and neural network prediction system are designed in parallel to improve efficiency and rough set is used for error correction.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.2
• /
• pp.1057-1069
• /
• 2017

The applications of Wireless Sensor Networks (WSN) are progressively adopting for various smart home services such as home automation, controlling smart home household appliances, constrained application services in a smart home, etc. However, enabling a seamless and ubiquitous WSN communication between the smart home appliances is still a challenging job. Therefore, in this paper, we propose a smart home control system using an Actuator based ZigBee networking (AZNET). The working of the proposed system is further divided into three phases, 1) an interference avoidance system is adopted to mitigate the effect of interference caused due to the co-existence of IEEE 802.11x based wireless local area networks (WLAN) and WSN, 2) a sensor-based smart light control system is used to fulfill the light requirement in the smart home using the sunlight with light source, and 3) an autonomous home management system is used to regulate the usage time of the electronic appliances in the smart home. The smart is tested in real time environment to use the sunlight with light sources in a various time of the day. Similarly, the performance of the proposed smart home is verified through simulation using C# programming language. The results and analysis revealed that the proposed smart home is less affected by the interference and efficient in reducing the energy consumption of the appliances available in the smart home scenario.

• Journal of the Korean Society of Systems Engineering
• /
• v.1 no.2
• /
• pp.49-55
• /
• 2005

The Smart UAV Program was motivated by a huge potential market, a various application and future core technologies. The Smart UAV system is defined as the advanced air vehicle with the smart technology such as collision awareness and avoidance, healthy monitering and self-recovering, intelligent active control. Due to the broad interest by government, industry and academia, Smart UAV development center and government steering committee were established. The organization of the Smart UAV program consists of domestic/international companies and academia. In this paper, the process and application of system engineering was introduced for Smart UAV development program.

• Smart Media Journal
• /
• v.3 no.2
• /
• pp.37-42
• /
• 2014

In this paper, the function design of smart media platform control with smart monitoring, and displaying modules which have the priorities of smart plug based smart outlet, is proposed for electrical suppliance of essential information appliance in emergency power consumption situation(blackout, peaktime etc). The effect of power management will be maximized by this smart gateway interlocking with ESS(energy storage system) which has bi-directional power transmission control modules, and smart outlet based on the priority control actions.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.1
• /
• pp.43-52
• /
• 2010

In this paper, the mobile-WiMAX (m-WiMAX) using the Smart antenna technique is implemented. Experiments are performed to compare Smart antenna system with conventional single antenna system. To implement the m-WiMAX smart antenna system there are many considerations, key issues of which are symbol time acquisition, beamforming, calibration. In the paper, symbol time acquisition, beamforming, calibration are implemented in WiMAX Smart antenna system and we verified that Smart antenna system is superior to single antenna system. The experimental results show 5.5 dB performance enhancement of implemented Smart antenna system in throughput compared with a single antenna system. The experimental result is almost same as theoretical result of 6 dB.

• International journal of advanced smart convergence
• /
• v.9 no.2
• /
• pp.157-163
• /
• 2020

Recently the blockchain technology has been actively studied due to its great potentiality. The smart contract is a key mechanism of the blockchain system. Due to the short history of the smart contract, many issues have not been solved yet. One main issue is vulnerability and another main issue is cost optimization. While the vulnerability of smart contract has been actively studied, the cost optimization has been rarely studied. In this paper, we propose two cost optimization methods for smart contracts running on the blockchain system. Triggering a function in a smart contract program code may require costs and it is repeated continuously. So the minimization of costs required to trigger a function of smart contract while maintaining the performance equally is very important. The proposed two methods minimize the usage of expensive permanent variables deployed on the blockchain system. We apply the proposed two methods to three prevalent blockchain platforms: Ethereum, Klaytn and Tron. Evaluation experiments verify that the proposed scheme significantly reduces the costs of functions in the smart contract written with Solidity.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.1
• /
• pp.102-108
• /
• 2015

This paper proposes a new fault isolation methodology for a smart protective device which plays an agent role on the smart grid distribution system with the distributed generation. It, by itself, determines accurately whether its protection zone is fault or not, identifies the fault zone and separates the fault zone through the exchange of fault information such as the current information and the voltage information with other protective devices using bi-directional communication capabilities on the smart grid distribution system. The heuristic rules are obtained from the structure and electrical characteristics determined according to the location of the fault and DG (Distributed Generation) when faults such as single-phase ground fault, phase-to-phase short fault and three-phase short fault occur on the smart grid distribution system with DG.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.4
• /
• pp.589-594
• /
• 2011

Smart Home or Home Network technology is one that continuously creates added value, making a better life. This paper designed and developed a smart home control system using smart phone. This proposed smart home system consists of home server control system, remote smart application system and home node structure. Home node structure, in detail, is composed of intrusion detection, gas leakage or gas valve control, door lock, automatic curtain, ventilation control and On/Off control modules and these modules are controlled at home server. Home server makes it easy to control home automatic control system anytime, anywhere as it provides remote interface that enables control via smartphone and user interface in itself.

• International journal of advanced smart convergence
• /
• v.9 no.2
• /
• pp.8-19
• /
• 2020

We see an energy fucused smart city evolution of the UK along with the project of "Smart London Plan (SLP)." A theoretical logic of business model innovation has been discussed and a research framework of evolving energy focused smart city is formulated. The starting point is the silo system. In the second stage, the private investment in smart meters establishes a basement for next stages. As results, the UK's smart energy sector has evolved from smart meter installation through smart grid to new business models such as water-energy nexus and microgrid. Before smart meter installation of the government, the electricity system was centralized. However, after consumer engagement plan has been set to make them understand benefits that they can secure through smart meters, the customer behavior has been changed. The data analytics firm enables greater understanding of consumer behavior and it helps energy industry to be smart via controlling, securing and using that data to improve the energy system. In the third stage, distribution network operators (DNOs)' access to smart meter data has been allowed and the segmentation starts. In the fourth stage, with collaboration of Ofwat and Ofgem, it is possible to eliminate unnecessary duplication of works and reduce interest conflict between water and electricity. In the fifth stage, smart meter and grid has been integrated as an "adaptive" system and a transition from DNO to DSO is accomplished for the integrated operation. Microgrid is a prototype for an "adaptive" smart grid. Previous steps enable London to accomplish a platform leadership to support the increasing electrification of the heating and transport sector and smart home.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.1
• /
• pp.124-133
• /
• 2021

Smart factory is a future factory that collects, analyzes, and monitors various data in real time by attaching sensors to equipment in the factory. In a smart factory, it is very important to inquire and generate the status and history of equipment in real time, and the emergence of various smart devices enables this to be performed more efficiently. This paper proposes a multi device-based system that can create, search, and delete equipment status and history in real time. The proposed system uses the Android system and the smart glass system at the same time in consideration of the special environment of the factory. The smart glass system uses a QR code for equipment recognition and provides a more efficient work environment by using a voice recognition function. We designed a system structure for real time equipment monitoring based on multi devices, and we show practicality by implementing and Android system, a smart glass system, and a web application server.