• Smart Structures and Systems
• /
• v.14 no.3
• /
• pp.327-345
• /
• 2014

This paper presents a composite control strategy for the active suppression of vibration due to the unknown disturbances, such as external excitation, harmonic effects and control spillover, as well as high-frequency accelerometer measurement noise in the all-clamped stiffened plate. The proposed composite control action based on the modal approach, consists of two contributions including feedback part and feedforward part. The feedback part is the well-known PID controller, which is widely used to increase the structure damping and improve its dynamic performance close to the resonance frequencies. In order to get better performance for vibration suppression, the weight matrixes is optimized by chaos sequence. Then an improved disturbance observer (IDOB) as the feedforward compensation part is developed to enhance the vibration suppression performance of PID under various disturbances and uncertainties. The proposed IDOB can simultaneously estimate the various disturbances dynamically as well as measurement noise acting on the system and suppress them by feedforward compensation design. A rigorous analysis is also given to show why the IDOB can effectively suppress the unknown disturbances and measurement noise. In order to verify the proposed composite control algorithm (IDOB-PID), the dSPACE real-time simulation platform is used and an experimental platform for the all-clamped stiffened plate active vibration control system is set up. The experimental results demonstrate the effectiveness, practicality and strong anti-disturbances ability of the proposed control strategy.

• Journal of the Korean Solar Energy Society
• /
• v.33 no.4
• /
• pp.23-30
• /
• 2013

This paper presents the determination method of the hybrid energy storage capacity for compensating the output of wind power when disconnecting from the grid. In the wind power output compensation, a lot of charging and discharging time with lithium-ion battery will be deteriorated the life time. And also, this fluctuation will cause some problems of the power quality and power system stability. To solve these kind of problems, many researchers in the world have been studied with BESS(Battery Energy Storage System) in the wind farm. But, BESS has the limitation of its output during very short term period, this means that it is difficult to compensate the very short term output of wind farm. Using the EDLC (Electric Double Layer Capacitor), it is possible to solve the problem. Installing the battery system in the wind farm, it will be possible to decrease the total capacity of BESS consisting of HESS (Hybrid Energy Storage System). This paper shows simulation results when not only BESS is connected to wind farm but also to HESS. To verify the proposed system, results of computer simulation using PSCAD/EMTDC program with actual output data of wind farms of Jeju Island will be presented.

• The Korean Journal of Franchise Management
• /
• v.12 no.2
• /
• pp.35-49
• /
• 2021

Purpose: The major objective of this study is to develop a model for the impact of franchisors' Gapjil (verbal·nonverbal Gapjil, abusing bargaining position, refusing transaction, false or exaggerated information, restrictive practices, unfair damage compensation) on franchisee's recontract intention. We also examine the mediating role of economic satisfaction and social satisfaction in the relationship between franchisors' Gapjil and franchisee's contract intention. Research design, data, and methodology: Data were collected from franchisee owners located nationwide in Korea. Out of 256 questionaires distributed, a total of 256 questionnaires were returned. After excluding 10 invalid respondent questionnaires, we coded and analyzed 246 valid questionnaires (effective response rate of 96.09%) using frequency, confirmatory factor analysis, correlations analysis, and structural equation modeling with SPSS 22.O and SmartPLS 3.0. Results: The findings of this study are summarized as follows: First, among the Gapjil of the franchisors, restrictive practices and unfair damage compensation had negative effects on economic and social satisfaction, but verbal and nonverbal Gapjil for economic and social satisfaction was not significant. Second, abusing bargaining positions and false or exaggerated information had negative effects on social satisfaction, but for economic satisfaction, found to be insignificant. Third, economic and social satisfaction had positive effects on the franchisee's recontract intention to the franchisor. Conclusion: The following implications of this study are as follows. First, the construct of Gapjil that occurs between the franchisors and the franchisees was first presented, and the franchisors' Gapjil is divided into interpersonal Gapjil and structural Gapjil. Second, the Gapjil of the franchisors can be an important predictor variable in maintaining and developing a long-term relationship between the franchisors and the franchisees. Third, solving conflict due to the Gapjil problem between franchisors and franchisees can be an important factor for franchisors and franchisees to co-survive and thrive in Korean franchise system. Fourth, this study suggest that managing the Gapjil of the franchisors was a important antecedent factor in maintaining long-term relationship between the franchisors and the franchisees. Therefore, this study will help franchisors formulate effective symbiotic marketing strategies to satisfy relationships with franchisees and consequently enhance long-term orientation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.6
• /
• pp.239-245
• /
• 2016

In this study, a 12 V PWM boost converter was designed with the optimal values of the external components of the power stage was well as the compensation stage for smart electronic applications powered by a battery device. The 12 V boost PWM converter consisted of several passive elements, such as a resistor, inductor and capacitor with a diode, power MOS switch and control IC chip for the control PWM signal. The devices of the power stage and compensation stage were designed to maintain stable operation under a range of load conditions as well as achieving the highest power efficiency. The results of this study were first verified by a simulation in SPICE from calculations of the values of major external elements comprising the converter. The design was also implemented on the prototype PCBboard using commercial IC LM3481 from Texas Instruments, which has a nominal output voltage of 12 V. The output voltage, ripple voltage, and load regulation with the line regulation were measured using a digital oscilloscope, DMM tester, and DC power supply. By configuring the converter under the same conditions as in the circuit simulation, the experimental results matched the simulation results.

• Journal of the HCI Society of Korea
• /
• v.12 no.4
• /
• pp.65-73
• /
• 2017

While electricity demand is generally increasing, stably controlling supply is becoming a serious challenge because renewable energies are becoming popular and often their productions are dependent on the weather. The 'demand response' programs can be used to complement the problems of renewable energies, and therefore their role is becoming increasingly important. This study provides an analysis of a demand response pilot that was conducted in Korea. The study first focused on questionnaire surveys and in-depth interviews, and the data was used to perform a Technology Acceptance Model (TAM) analysis. The goal of the pilot was to have the residential users reduce their power consumptions when an energy reduction mission is issued during peak load hours. The experimental subjects consisted of two groups with different characteristics. Subjects in group A obtained smart meters as an optional function of IoT platform service provided by a mobile service company, and received a charge deduction as their compensation. Subjects in group B either voluntarily purchased smart meters as individuals or received them by participating in an energy self-sufficient village program that was run by a local government, and were entitled to a donation as their compensation. With the analysis, group A was found to fit the extended technology acceptance model that includes perceived playfulness in addition to perceived ease of use and perceived usefulness. On the contrary, group B failed to fit the model well, but perceived usefulness was found to be relatively more important compared to group A. The results indicate that the residential energy groups' behavior changes are dependent on each group's characteristics, and group-specific DR design should be considered to improve the effectiveness of DR.

• Cartoon and Animation Studies
• /
• s.47
• /
• pp.273-294
• /
• 2017

Korea has suffered numerous casualties due to a lot of accidents caused by safety insufficiency in recent years. Therefore, safety education is more important than ever before, and 'how to educate with what contents' is an important subject. Especially, experience education is effective rather than theoretical education because of the nature of safety education. However, it is not easy to design and develop these safety education programs. There is not much opportunity to access first-aid training, which is a part of safety education, unless it is compulsory to learn through public institutions. As a result, program utilization on safety education in Korea is still insufficient to what it should be. With that taken into account, this study proposed an effective serious game with fun and immersion for medical first-aid education. To do this, we analyzed five medical games through 20 cases of first-aid applications and elicited five factors that enhance the usability of serious games. With an analysis of five medical games, we selected one game to borrow the game rules, and applied the elicited five elements in the forms of level-up structure, iterative learning, compensation outcomes, competition system, and information transfer. The proposed medical education functional games should have 1) a character that plays a role of a patient, 2) a narrative flow that shows the situation, 3) the user should judge the situation and induce first aid. 4) compensation, levels, and simple repetition should be designed, and 5) information should be shared with the others in the given community. The results of this study is believed to contribute to enhance the medical emergency education in Korea.

• Journal of Industrial Convergence
• /
• v.20 no.5
• /
• pp.29-38
• /
• 2022

Because of the need of actual performance of education, this study aims to understand how the factors of educational content and organizational characteristics affect organizational commitment and work performance, which are organizational effects, through learning transfer. As a result, task value, job relevance, and organizational compensation had a significant effect on learning transfer, learning transfer had a significant effect on organizational commitment and work performance, and organizational commitment had a significant effect on work performance. In order to increase the learning transfer of education, when specifying the connection with the actual job and strengthening the compensation system of the members, the learning transfer can be increased and eventually connected to performance. Since limited variables are considered, a more representative sample or professional group should be extracted through future research. In future studies, it will be possible to closely grasp the relationship between learning transfer and organizational effectiveness by setting representative samples and specifying variables.

• Korean Journal of Construction Engineering and Management
• /
• v.24 no.1
• /
• pp.12-20
• /
• 2023

To calculate the amount of owner-caused and contractor-caused delays based on a simplified delay analysis, which has been customarily used in Korea, has a limitation in reflecting the impact of the concurrent delay and the acceleration work. It also resulted in the apportionment of liquidated damages by applying the ratio of the number of delays between the owner and the contractor. This study analyzes that the conventional method does not meet the international standards. In order to improve the problem of construction delay analysis and the apportionment of liquidated damages based on it, owner delays, contractor delays, concurrent delays, and the impact of acceleration should be analyzed together. This study suggests that in the apportionment of liquidated damages, the extension of time should be extended by the sum of concurrent delays and the owner-caused delays, and liquidated damages should be imposed on delays incurred after the extension of time. It can be seen that it conforms to the international standards. The results of this study are expected to contribute to improving the problems of delay analysis and liquidated damages calculation, which have been conventionally accepted.

• Smart Media Journal
• /
• v.6 no.4
• /
• pp.94-100
• /
• 2017

Procurement of development funds is a very difficult process in the Korean game industry where competition is fierce. Recently, crowdfunding has been used as a convenient platform to attract potential investors to secure the development cost of the game. This study explored the factors influencing the success of crowdfunding for game development projects. We collected data on 229 game development projects in Tumblebuck, a reward-based crowdfunding site in Korea. According to the results of the logistic regression model, the factors that have a positive effect on the success of funding are the average compensation amount relative to the target amount, the number of SNS shares, the number of updates, and the originality of the proposed game. Video playback time has been found to have a negative impact. Based on the results of this study, it is expected that planning a game development project considering the variables affecting the success of crowdfunding will help financing.

• The Journal of Information Systems
• /
• v.26 no.4
• /
• pp.87-106
• /
• 2017

Purpose The main purpose of this study is to examine whether the expectations and outcomes of the bicycle-sharing service significantly influence users' expectation disconfirmation, satisfaction, and continuous intention to use. In addition, we will verify the moderating effect of social interaction in bicycle-sharing service on the relationship between satisfaction and continuous intention to use. Design/methodology/approach Based on previous studies dealing with determinants of bicycle use, users' expectations and outcomes of the bicycle-sharing service were measured by three variables; accessibility, convenience, and safety. To collect the data, we conducted a survey of undergraduates at a university located in Seoul for three weeks, beginning March 6. Participants completed the first questionnaire, which measured expectations of the bicycle-sharing service based on the attributes and social interaction before using the BSS. After a few weeks, the same participants completed the second questionnaire, which measured outcomes of the outcome, disconfirmation, satisfaction, and continuous intention to use the BSS. Only participants who completed both surveys received monetary compensation. In order to test hypothesis, the Smart Partial Least Square (SmartPLS) modeling technique was applied. Findings In terms of main effects, based on the expectation disconfirmation theory, the results indicated that there were significant relationship among expectation, performance, disconfirmation, and satisfaction. In particular, it was verified that disconfirmation completely plays a mediating role between performance and satisfaction. In addition, the moderating effect of social interaction was examined. There was a significant interaction effects of social interaction and satisfaction on the continuous intention to use for leisure purpose. Finally, this study is expected to contribute to the study of resource sharing in the field of tourism and provide baseline information for future research.