Browse > Article
http://dx.doi.org/10.12989/sss.2014.14.3.327

DOB-based piezoelectric vibration control for stiffened plate considering accelerometer measurement noise  

Li, Shengquan (School of Hydraulic, Energy and Power Engineering, Yangzhou University)
Zhao, Rong (School of Hydraulic, Energy and Power Engineering, Yangzhou University)
Li, Juan (School of Automation, Southeast University)
Mo, Yueping (School of Hydraulic, Energy and Power Engineering, Yangzhou University)
Sun, Zhenyu (School of Hydraulic, Energy and Power Engineering, Yangzhou University)
Publication Information
Smart Structures and Systems / v.14, no.3, 2014 , pp. 327-345 More about this Journal
Abstract
This paper presents a composite control strategy for the active suppression of vibration due to the unknown disturbances, such as external excitation, harmonic effects and control spillover, as well as high-frequency accelerometer measurement noise in the all-clamped stiffened plate. The proposed composite control action based on the modal approach, consists of two contributions including feedback part and feedforward part. The feedback part is the well-known PID controller, which is widely used to increase the structure damping and improve its dynamic performance close to the resonance frequencies. In order to get better performance for vibration suppression, the weight matrixes is optimized by chaos sequence. Then an improved disturbance observer (IDOB) as the feedforward compensation part is developed to enhance the vibration suppression performance of PID under various disturbances and uncertainties. The proposed IDOB can simultaneously estimate the various disturbances dynamically as well as measurement noise acting on the system and suppress them by feedforward compensation design. A rigorous analysis is also given to show why the IDOB can effectively suppress the unknown disturbances and measurement noise. In order to verify the proposed composite control algorithm (IDOB-PID), the dSPACE real-time simulation platform is used and an experimental platform for the all-clamped stiffened plate active vibration control system is set up. The experimental results demonstrate the effectiveness, practicality and strong anti-disturbances ability of the proposed control strategy.
Keywords
active vibration control; all-clamped stiffened plate; disturbance observer; piezoelectric; high frequency measurement noise; composite control;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Boudaoud, H., Belouettar, S., Daya, E.M. and Ferry, M.P. (2009), "A shell finite element for active-passive vibration control of composite structures with piezoelectric and viscoelastic layers", Mech. Adv. Mater. Sturct., 62(2), 374-384.
2 Ji, H.L., Qiu, J.H., Badel, A. and Chen, Y. (2009), "Semi-active vibration control of a composite beam by adaptive synchronized switching on voltage sources based on LMS algorithm", J. Intel. Mat. Syst. Str., 20(8), 939-947.   DOI
3 Chen, W.H. (2003), "Nonlinear disturbance observer enhanced dynamic inversion control of missiles", J. Guid. Control Dynam., 26(1), 161-166.   DOI   ScienceOn
4 Grossard, M., Boukallel, M., Chaillet, N. and Rotinat-Libersa, C. (2011), "Modeling and robust control strategy for a control-optimized piezoelectric microgripper", IEEE/ASME T. Mechatronics, 16(4), 674-683.   DOI
5 Hu, Q.L. (2012), "Robust adaptive sliding mode attitude control and vibration damping of flexible spacecraft subject to unknown disturbance and uncertainty", T. Inst. Measurement Control, 34(4), 436-447.   DOI
6 Jiang, J.P. and Li, D.X. (2010), "Optimal placement and decentralized robust vibration control for spacecraft smart solar panel structures", Smart Mater. Struct., 19(8), 1-10.
7 Li, S.Q., Ji, H.L. and Qiu, J.H. (2012), "Multi-mode vibration suppression of a stiffened panel using active disturbance rejection controller based on output predictor", J. Vib. Eng., 25(1), 17-23 (In Chinese).
8 Li, S.Q., Qiu, J.H., Ji, H.L., Zhu, K.J. and Li, J. (2011), "Piezoelectric vibration control for all-clamped panel using DOB-based optimal control", Mechatronics, 21(7), 1213-1221.   DOI   ScienceOn
9 Li, S.Q., Qiu, J.H., Li, J., Ji, H. and Zhu, K. (2012), "Multi-modal vibration control using amended disturbance observer compensation", IET Control Theory Appl., 6(1), 72-83.   DOI   ScienceOn
10 Ohnishi, K., Nakao, M. and Miyachi, K. (1987), "Microprocessor controlled DC motor for load-insensitive position servo systems", IEEE T. Ind. Electron., 31(1), 44-49.
11 Ma, K. and Ghasemi-Nejhad, M.N. (2005), "Adaptive simultaneous precision positioning and vibration control of intelligent composite structures", J. Intel. Mat. Syst. Str., 16(2), 163-174.   DOI
12 Malgaca, L. and Karagulle, H. (2009), "Simulation and experimental analysis of active vibration control of smart beams under harmonic excitation", Smart Struct. Syst., 5(1), 55-68.   DOI
13 Montazeri, A., Poshtan, J. and Yousefi-Koma, A. (2011), "Design and analysis of robust minimax LQG controller for an experimental beam considering spill-over effect", IEEE T. Contr. Syst. T., 19(5), 1251-1259.   DOI
14 Qiu, J.H. and Ji, H.L. (2010), "The application of piezoelectric materials in smart structures in China", Int. J. Aeronaut. Sci., 11(4), 266-284.
15 Qiu, Z., Han, J., Zhang, X., Wang, Y.C. and Wu, Z.W. (2009), "Active vibration control of a flexible beam using a non-collocated acceleration sensor and piezoelectric patch actuator", J. Sound Vib., 326(3-5), 438-455.   DOI
16 Radecki, P.P., Farinholt, K.M., Park, G. and Bement, M.T. (2010), "Vibration suppression in cutting tools using a collocated piezoelectric sensor/actuator with a adaptive control algorithm", J. Vib. Acoust., 132(5), 1-12.
17 Yang, J., Li, S.H. and Yu, X.H. (2013), "Sliding-mode control for system with mismatched uncertainties via a disturbance observer", IEEE T. Ind. Electron., 60(1), 160-169.   DOI   ScienceOn
18 Ren, X., Lewis, F.L. and Zhang, J. (2009), "Neural network compensation control for mechanical system with disturbances", Automatica, 45(5), 1221-1226.   DOI   ScienceOn
19 Teoh, J.N., Du, C., Guo, G. and Xie, L. (2008), "Rejecting high frequency disturbances with disturbance observer and phase stabilized control", Mechatronics, 18(1), 53-60.   DOI
20 Xie, W. (2010), "High frequency measurement noise rejection based on disturbance observer", J. Franklin I., 347(10), 1825-1836.   DOI
21 Yang, J., Li, S.H., Chen, X.S. and Li, Q. (2011), "Disturbance rejection of dead-time process using disturbance observer and model predictive control", Chem. Eng. Res. Des., 89(2), 125-135.   DOI   ScienceOn
22 Yuan, M., Ji, H.L., Qiu, J.H. and M, T.B. (2012), "Active control of sound transimission through a stiffened panel using a hybrid control strategy", J. Intel. Mat. Syst. Str., 23(7), 791-803.   DOI
23 Bedair, O. (2009), "Analysis and limit state design of stiffened plates and shells: a world view", Appl. Mech. Rev., 62(2), 374-384.
24 Ang, K.K., Wang, S.Y. and Quek, S.T. (2002), "Weighted energy linear quadratic regulator vibration control of piezoelectric composite plates", Smart Mater. Struct., 10(11), 98-106.
25 Balamurugan, V. and Narayanan, S. (2010), "Finite element modeling of stiffened piezolaminated plates and shells with piezoelectric layers for active vibration control", Smart Mater. Struct., 19(10), 1-21.
26 Beck, B.S., Cunefare, K.A., Collet, M. and Ruzzene, M. (2011), "Active vibration control of a stiffened panel through application of negative capacitance shunts", Proceeding of SPIE, San Diego.
27 Zhou, P., Chai, T.Y. and Zhao, J.H. (2012), "DOB design for nonminimum-phase delay systems and its application in multivariable MPC control", IEEE T. Circuits -II, 59(8), 525-529.   DOI
28 Lin, J. (2005), "An active vibration absorber of smart panel by using a decomposed parallel fuzzy control structure", Eng. Appl. Artif. Intel., 18(5), 985-998.   DOI