• KIEAE Journal
• /
• v.14 no.5
• /
• pp.75-80
• /
• 2014

An attempt has been made to prove the so-called 'feature accumulation theory'. It is the theory describing that people tend to feel the same space with more identifiable objects much larger than that with fewer objects. Applying this theory to our cognition of spatial size, this paper made an experiment. Students were asked that if the lecture room they are sitting becomes a module (module 1), then how large are the questioned spaces in the campus. The result was striking. Through the mental image processing, they answered that the library and the architecture building looks much smaller than they actually are, and more surprisingly the basketball field much more smaller than it really is. This experiment shows that there is a strong tendency by which people regard the space much larger when there are more occupiable or behavior-causing elements in the space. In the case of basketball field, since there is nothing that can be occupied, this open space is seen as a small space for the subjects. This line of cognitive perception can be applied to the practice of urban planning and architectural planning. With the same size of given space, we can make it feel more rich and larger.

• Journal of Radiation Protection and Research
• /
• v.43 no.4
• /
• pp.154-159
• /
• 2018

Background: To prevent small leakage accidents, a real-time and direct detection system for small leaks with a detection limit below that of existing systems, e.g. $0.5gpm{\cdot}hr^{-1}$, is required. In this study, a small-size beta detector, which can be installed inside the reactor containment (CT) building and detect small leaks directly, was suggested and its feasibility was evaluated using MCNPX simulation. Materials and Methods: A target nuclide was selected through analysis of radiation from radionuclides in the reactor coolant system (RCS) and the spectrum was obtained via a silicon detector simulated in MCNPX. A window was designed to reduce the background signal caused by other nuclides. The sensitivity of the detector was also estimated, and its shielding designed for installation inside the reactor CT. Results and Discussion: The beta and gamma spectrum of the silicon detector showed a negligible gamma signal but it also contained an undesired peak at 0.22 MeV due to other nuclides, not the $^{16}N$ target nuclide. Window to remove the peak was derived as 0.4 mm for beryllium. The sensitivity of silicon beta detector with a beryllium window of 1.7 mm thickness was derived as $5.172{\times}10^{-6}{\mu}Ci{\cdot}cc^{-1}$. In addition, the specification of the shielding was evaluated through simulations, and the results showed that the integrity of the silicon detector can be maintained with lead shielding of 3 cm (<15 kg). This is a very small amount compared to the specifications of the lead shielding (600 kg) required for installation of $^{16}N$ gamma detector in inside reactor CT, it was determined that beta detector would have a distinct advantage in terms of miniaturization. Conclusion: The feasibility of the beta detector was evaluated for installation inside the reactor CT to detect small leaks below $0.5gpm{\cdot}hr^{-1}$. In future, the design will be optimized on specific data.

• Journal of the Korean Institute of Rural Architecture
• /
• v.18 no.3
• /
• pp.9-16
• /
• 2016

This study aimed to clarify the multifunctional services and space composition in the process of developing a multifunctional long-term care program in small elderly care facilities in Japan. We collected data about multifunctional long-term care at small facilities from the Community Life Support Center (CLC), a Japanese non-profit corporation, and conducted an interview survey of the members of the CLC's secretariat in 2014. Furthermore, we selected 3 Japanese pioneering care facilities (known as takurosho), and conducted interview surveys and data collection to clarify in detail the space composition and process of development of multifunctional long-term care at small facilities. Four distinct results were found. First, the facilities had gradually increased non-institutional services, including visitation, overnight stays, and long-term stays, to fit the needs of users and their families. Secondly, in the 1990s, they could offer both non-institutional and institutional services at the same facility, but after the long-term care insurance system began in 2000, non-institutional long-term stay services were not allowed. Third, the facilities had built extensions or extra rooms in response to increases in multifunctional services and users. These rooms had common characteristics, with sitting rooms at the center of the facility. Lastly, the maximum number of service users at each of the 3 facilities was limited to 15, to maintain a small scale. However, as the size of facilities was increased through building extensions or remodeling, the overall amount of area available to users increased.

• Korean Journal of Construction Engineering and Management
• /
• v.12 no.6
• /
• pp.14-21
• /
• 2011

A unit modular system is a construction method which installs on site by manufacturing 50%~90% of the whole process in the factory. This method can minimize the process in the site and maximize the operation, which will reduce the duration and improve the overall quality. The recent paradigm of construction is to be sustainable building. Modular system can be regarded as a sustainable building construction method because it can reduce the amount of construction waste by recycling partial or whole part of overdue building be torn down. A unit modular system is the answer to cope with the increasing market of small size housings. A unit modular system is the most appropriate option at this point. This research proposes the standard operation and construction process of modular system, which enable to optimal system. A case study of reconstructing small-size housing was introduced to support this proposal. Finished unit modular is the reasonable way. However, 80% of complication rate of the modular is the most rational when a defect occurrence during delivery is considered.

• Information Systems Review
• /
• v.11 no.2
• /
• pp.183-207
• /
• 2009

In general, the introduction of information technology to domestic small and middle size firms is depending on the governmental supporting policy. However, even under this situation there is also a case that the building up of information technology is initiated by the management of small and middle size firms. An accumulated know-how for information technology and powerful leadership in such firms are considered as success factors. This study attempts to analyze a case for 'THEFACESHOP', in which MIS is successfully built. To achieve corporate goals, the CEO of THEFACESHOP based on the extensive knowledge of information technology drove to build up information system. Also, the board of directors supported him, and employees committed to their organization. Through the strong leadership of the CEO, the information system of THEFACESHOP became sufficient and efficient. And it led the organization and the information system to be competitive. In particular, the systematic approach of THEF ACESHOP reinforcing its competitiveness can be summarized as follows: First, it tried to construct basic information systems as like ERP etc. to increase work-efficiency. Second, it completed CRM related systems for analysis to maximize its customer orientation and marketing effect. Third, the last step can be stated as the building up of operation related CRM systems to improve the responsiveness of target marketing activities and the profitability of its agencies. Such endeavors of THEFACESHOP contributed to increase productivity and performance of the organization. As a result, THEFACESHOP has had its own 'Natural Story' and price competitiveness. For that reason THEFACESHOP became the best of brand-shop cosmetic firms. This success based on the strong leadership and the systematic investment on the information system.

• Journal of the Korea Institute of Building Construction
• /
• v.10 no.1
• /
• pp.213-219
• /
• 2010

The research, based on 200 cases of small interior works in6 different floor area types of apartment in Busan, intended to compare the architectural work with the breakdown structure and analyze the cost of general small-scale interior work, by work type. The outcome of the research is outlined as follows. (1) Given the cost of small interior works for apartmentsranges from 10 million to 15 million won, which correspond to apartments ranging in size from $79.2m^2$ (24PY) to $105.6m^2$, it is necessary to implement a cost analysis for material cost and labor cost for these two types. (2) Given that small interior work for apartments comprises mostly finishing work, unlike the categoriesof general architectural work, it is more reasonable to classify the works into 9 categories,which include embellishment, wood, tile, paint, metal, toilet, sink & furniture, electric & mechanical and other works, instead of the 22 divisions stipulated in the Korean Architectural Standard Specification. (3) After reviewing the average cost of small interior work and rate by floor area, it was found thatthe average cost of 24PY was 10.5 million won, of which metal work accounts for 12.8%, embellishment work 17.8%, and toilet 19.7%, while sink & furniture appeared to be the highest with 22.1%, while for 32PY, average cost was 12.5 million won,which comprises 7.4% wood work, sink & furniture 20.2%, toilet 23.4% and embellishment work the highest at 28.6%, indicating that embellishment work accounts for the greater portion.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.7
• /
• pp.385-390
• /
• 2017

This study investigated removal characteristic of soluble Cs in water by RPT (Radioactivity pollutant treatment) with coagulation and sedimentation. The RPT conducted with various chemical and natural coagulants to remove the soluble Cs which consisted pre-adsorption, Sedimentation and post-adsorption. Natural absorbent included Illite and zeolite. Especially, Illite divided LPI (Large Particle Illite) and SPI (Small Particle Illite) by grain size. Also, Chemical coagulants included high basicity PAC (poly aluminum chloride). The adsorbent had a plate structure mainly composed of quartz, albite and muscovite. The surface area were $4.201m^2/g$ and $4.227m^2/g$ and the particle sizes were $197.4-840.9{\mu}m$ and $3.28-53.57{\mu}m$, respectively. The adsorption efficiency of the natural Illite was 82.8% for LPI and 85.6% for SPI. The removal efficiency of turbidity, which was an indirect indicator of adsorbent recovery, was 96.4% and 98.3%, respectively.

• Genomics & Informatics
• /
• v.2 no.4
• /
• pp.174-179
• /
• 2004

We developed various plasmid cloning vectors that are useful in the construction of genomic and shotgun libraries. Two medium copy vectors, pCUGlblu21 (pCb21) and pAGlblu21 (pAb21), which are resistant to kanamycin ($Km^R$) and chloramphenicol ($Cam^R$), respectively, are useful for cloning DNA inserts ranging from 5kb to 15kb. Two high copy vectors, pCUGlblu31 (pCb31) and pAGlblu31 (pAb31), containing $Km^R$ and $Cam^R$, respectively, are useful for DNA inserts less than 5kb. These vectors are well adapted for large-scale genome sequencing projects by providing choice of copy number and selectable marker. The small vector size is another advantage of these vectors. All vectors contain lacZa including multicloning sites that originated from pBluscriptllsk- for easy cloning and sequencing. Two medium copy vectors contain unique and rare cutting Swal (ATTTAAAT) restriction enzyme sites for easy determination of insert size. We developed two combined vectors, pC21A31 and pC31A21, which are combinations of (pCb21 + pAb31) and (pCb31 + pAb21), respectively. These two vectors provide four choices of vectors such as $Km^R$ and medium, $Cam^R$ and high, $Cam^R$ and medium, and $Km^R$ and high copy vectors by restriction enzyme cutting, dephosphorylation, and gel purification. These vectors were successfully applied to high throughput shotgun sequencing of rice, tomato, and brassica BAC clones. With an example of extremely biased hydro sheared 3 kb shotgun library of a tomato BAC clone, which is originated from cytogenetically defined peri-centromeric region, we suggest the utility of an additional 10 kb library for sequence assembly of the difficult-to-assemble BAC clone.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.11a
• /
• pp.36-37
• /
• 2015

Recently, there has been a rapid increase in demand for lightweight walls for their use as interior partitions, as types of structure have gradually changed from shear wall structures to column structures or flat plate column wall systems. The lack of resisting force in lightweight walls is found by measuring the depth of dents in impact resistance tests, but it is not a direct factor of impact resistance. However, in the user's position, dents of over a certain size are clearly a factor that visually reminds the need for repair. In this study, we reviewed relative methods of assessment of the need for repair based on the visual means of determination (sensory test) on the dents on lightweight walls. Dents were found to stand out starting from depths of about 4mm, and the depth of roughly 5mm was found to be the criterion for determining the necessity of repair for men, while it was 4mm for women.

• Journal of environmental and Sanitary engineering
• /
• v.19 no.1
• /
• pp.24-36
• /
• 2004

This study is to investigate the present condition of waste disposal establishment and to analysis problems which could be produced at location selection formalities of waste disposal establishment. It proposed building methods of waste disposal establishment to lead spontaneous participation of local resident according to case analysis of waste disposal establishment. There are research results; i) Opposition of inhabitants was the majority of reason at the business abandonment or delay of waste disposal establishment. Therefore agreement formation course with local inhabitants is most important position. ii) Many estimate have been needed for waste disposal establishment, but support estimate of government was 30-50% that is really low compare with other environmental establishment. So that it need to increase of government estimate. iii) Location collection is carried out based on law and final collected location must be executed without delay of relation business as soon as possible. iv) Standard of location collection has to divide into small, middle and large size and to apply with same rule according to divided location. v) It must be change public subscription before and location selection after and maintain continuance of information offer to local inhabitants and offered information. vi) after building of waste disposal establishment for solving distrust of waste disposal establishment. It must be planed and carried on useful support countermeasure to local inhabitants in actuality.