• Structural Engineering and Mechanics
• /
• 제9권1호
• /
• pp.1-16
• /
• 2000

To study the dynamic response of a rigid block standing unrestrained on a rigid foundation which shakes horizontally, four modes of motion can be identified, i.e., rest, slide, rock, and slide and rock. The occurrence of each of these four modes and the transition between any two modes depend on the parametric values specified, the initial conditions, and the magnitude of ground acceleration. In this paper, a general two-dimensional theory is presented for dealing with the various modes of a free-standing rigid block, considering in particular the impact occurring during the rocking motion. Through selection of proper values for the system parameters, the occurrence of each of the four modes and the transition between different modes are demonstrated in the numerical examples.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2001년도 봄 학술발표회 논문집
• /
• pp.509-516
• /
• 2001

As the first step for the application of seismic landslide hazard maps to domestic cases, two types of hazard maps on Ul-joo from pseudostatic analysis and Newmark sliding block analysis are constructed and comllared. Arcview, the GIS program and the 1:5,000 digital maps of the test-site are used for the construction of hazard maps and tile parameters for the analyses are determined by seismic survey and laboratory tests. The results from the pseudostatic analysis have more conservative values of lower critical slope angles, although the results from the two different analyses have similar tendencies. In detail, with increasing the peak ground acceleration, the difference between the two analyses in the critical slope angle increases, while the difference decreases with increasing the maximum soil depth.

• Journal of Mechanical Science and Technology
• /
• 제15권9호
• /
• pp.1248-1256
• /
• 2001

In this study, a test bed for vehicle longitudinal control is developed using a chassis dynamometer and real time 3-D graphics. The proposed test bed system consists of a chassis dynamometer on which test vehicle can run longitudinally, a video system that shows virtual driver view, and computers that control the test vehicle and realize the real time 3-D graphics. The purpose of the proposed system is to test vehicle longitudinal control and warning algorithms such as Adaptive Cruise Control(ACC), stop and go systems, and collision warning systems. For acceleration and deceleration situations which only need throttle movements, a vehicle longitudinal spacing control algorithm has been tested on the test bed. The spacing control algorithm has been designed based on sliding mode control and road grade estimation scheme which utilizes the vehicle engine torque map and gear shift information.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.122-125
• /
• 2002

The optimal guidance has advantages of accuracy and economic energy consumption but it is difficult to implement due to its dependence on the target information such as the relative range, the relative velocity and the acceleration of target. This paper uses optimal guidance and sliding-mode guidance to obtain a new guidance method. The suggested method shows robustness against target maneuvers, good dynamic performance, energy saving of missile and terminal accuracy. Its effectiveness is demonstrated by the simulation results.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.32-33
• /
• 2014

This paper presents control performances of a seat suspension system equipped with magnetorheological (MR) dampers using a new adaptive fuzzy sliding mode controller (FSMC). Adaptive fuzzy controller is formulated by considering the acceleration of the seat. It has been demonstrated that the proposed seat suspension system realized by the adaptive fuzzy sliding mode controller can provide effective performances such as reduced vibration.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제52권1호
• /
• pp.1-8
• /
• 2003

In this paper, an observer-based adaptive controller is proposed to control the longitudinal motion of vehicles. The standard gradient method is used to estimate the vehicle parameters, mass, time constant, etc. The inter-vehicle spacing and its derivatives are estimated by using the sliding mode cascade observer introduced in this paper. It is shown that the proposed adaptive controller is uniformly ultimately bounded. It is also shown that the errors of the relative distance, the relative velocity and the relative acceleration asymptotically converge to zero. The simulation results are presented to investigate the effectiveness of the proposed method.

• 터널과지하공간
• /
• 제16권1호
• /
• pp.58-72
• /
• 2006

암반구조물의 규모가 점차 대형화됨에 따라 암반이 자유면에 노출되는 확률이 높아지고 있으며, 최근 들어 지진이나 발파, 고속철도의 운행에 의한 진동 등으로 야기되는 동적 하중의 발생빈도가 증가하는 추세이므로 동적 하중조건 하에서 암반 불연속면의 거동 특성 파악을 위한 연구의 필요성이 증대되고 있다. 본 연구에서는 자유면에 노출된 블록의 동적 거동을 모사할 수 있도록 경사면 진동대 시험장비를 제작하였고, 다양한 동적 하중 조건하에서 편평한 화강암 절리면의 마찰 거동 특성을 분석하였다. 경사시험을 통해서 구한 한계 경사각과 진동하중 하에서의 임계가속도로부터 역산한 정적 마찰각을 비교한 결과 동하중 하에서 정적마찰각이 $4.5\~8.2^{\circ}$ 정도 낮게 산정되는 경향을 보였다. 이론적인 암석 블록의 마찰 거동을 표현하는 블록 거동 프로그램을 작성하고, 진동하중에 의해 미끄러지는 암석 블록의 가속도 및 변위 계측결과를 개발된 프로그램에 의한 결과와 비교하여 암석 절리면의 동적 마찰각을 산정하였는데 동적 마찰각 역시 한계 경사각에 비해 $2.0\~7.5^{\circ}$ 정도 감소하는 결과를 얻었다. 동하중 하에서 측정된 정적 마찰각과 동적 마찰각은 가해진 가속도의 크기나 진폭 등의 하중 특성과 기하조건에 따라 달라지는 경향을 보였다. 개별요소 프로그램을 이용하여 진동대 시험을 모사하였는데, 계측결과 및 개발된 프로그램에 의한 결과와 비교적 잘 일치하였다. 진동대 시험에 의한 동적, 정적 마찰각은 직접전단시험에 의한 기본 마찰각보다 현저히 작게 산정되었다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2004년도 학술대회지
• /
• pp.269-274
• /
• 2004

It is important to decide the minimum film thickness and viscosity variations of a multigrade lubricant in the contact surface under the high pressure conditions. By carrying out acceleration, deceleration, and various sliding-rolling ratio movement between two contact bodies, it is experimented that film formation variations in the contact surface are captured with multigrade lubricants in order to exactly investigate the variations of film formations. Optical interference images are continuously captured with high resolution CCD camera during the captured period of acceleration, deceleration. The friction forces between the contacting bodies are also measured simultaneously with the film formation.

• 대한전기학회논문지
• /
• 제45권1호
• /
• pp.139-145
• /
• 1996

The input estimation method estimates maneuvering input acceleration in order to track a maneuvering target. In this paper, the optimal input estimator is derived by choosing the MAP hypothesis among maneuvering input transition hypotheses under the assumption that a maneuvering input acceleration is a semi-Markov process. The optimal input estimation method cannot be realized because the optimal filter should consider every maneuver onset time hypothesis from filter starting time to current time which increase rapidly. Hence the suboptimal filter using a sliding window is proposed. Since the proposed method can consider all hypotheses of input transitions inside the window, it is general enough to include Bogler's input estimation method. Simulation results show, however, that we can obtain a good performance even when the filter considering just one input transition in the window is used. (author). 9 refs., 3 figs., 1 tab.

• 한국자동차공학회논문집
• /
• 제19권4호
• /
• pp.38-46
• /
• 2011

This paper presents roll angle estimator which used Kalman filter. Recently, the uses of the ELSD (Electronic Limited Slip Differential) and TVD(Torque Vectoring Differential) for vehicle yaw control are studied in many researches. However the roll angle can be negative effect of ELSD and TVD control. Therefore the information of roll angle can be used for vehicle yaw control. Moreover it can be used for rollover prevent control. Recently, most of the vehicles use lateral acceleration and yaw rate sensor. In this paper, design of Kalman filter which used lateral acceleration and yaw rate information is developed. In this paper, in order to verify the estimator ability, the CarSim and Matlab/Simulink are used.