• Journal of Fashion Business
• /
• v.18 no.2
• /
• pp.54-65
• /
• 2014

This study developed basic pattern for competition figure skating wear for school girls. Figure skating wears are difficult for making basic patterns based on standard size chart, because girls' body size are slimmer and more slender compared to the general girl's and the competition wears such as, swim suit with sleeves are, closely in contact with the player's body. The competition wears for school girl was made with consideration of changing of the body shape, physical exercises, and various specificities according to stretch material. To raise artistic effect while doing beautiful motions, and to assist in facile technique motions, competition wears need to have enough ease on the side line from waist to armpit, from armpit to wrist, and in trunk girth including crotch girth. Also, to stand out in beauty, a costume designing has a proper skirt position, length, flare width, and a tight bodice according to the player's body proportion. Most of the customers are displeased at the high price, unfitness of size, insufficient design, and difficulty in access, since they are not sold in sporting goods store. Therefore, a competition wear's basic pattern was made through scientific and emotional process including concerns on material properties, room for activities, and ideal body proportion. Systemizing the basic patterns of production method will solve high repairing expenses, unsuitable sizing, and improve accessibility for purchase.

• Analytical Science and Technology
• /
• v.30 no.4
• /
• pp.159-166
• /
• 2017

Exposure to UV light, i.e., UV-A (320-400 nm) or UV-B (290-320 nm) radiation, can cause skin cancer. Titanium dioxide ($TiO_2$) effectively disperses UV light. Therefore, it is used as a physical UV filter in many UV light blockers. Usually, the $TiO_2$ content in commercialized UV blockers is 25 % at most. To block UV-B, a chemical UV blocker, octyl-methoxy cinnamate (OMC) is used. OMC is commonly used in combination with $TiO_2$. In this study, $TiO_2$ and OMC were mixed in different proportions to produce UV blockers with different compositions. Also the changes in the sun protection factor (SPF) based on the composition and $TiO_2$ particle sizes were investigated. In order to analyze the $TiO_2$ particle size, dynamic light scattering (DLS) and asymmetrical flow field-flow fractionation (AsFlFFF) were used. The results showed that the SPF was influenced by the proportion of $TiO_2$ and OMC, where the proportion of $TiO_2$ induced a more significant influence. In addition, changes in the $TiO_2$ particle size based on the proportion of OMC were observed.

• Transactions of Materials Processing
• /
• v.19 no.8
• /
• pp.486-493
• /
• 2010

A shape error of the sheet metal product made by a flexible stretch forming process is occurred by a various forming parameters. A die used in the flexible stretch forming is composed of a punch array to obtain the various objective surfaces using only one die. But gaps between the punches induce the shape error and the defect such as a scratch. Forming parameters of the punch size and the elastic pad to prevent the surface defect must be considered in the flexible die design process. In this study, tendency analysis of shape error according to the forming parameters in the flexible stretch process is conducted using a finite element method. Three forming parameters, which are the punch size, the objective curvature radius and the elastic pad thickness, are considered. Finite element modeling using the punch height calculation algorithm and the evaluation method of the shape error, which is a representative value for the formability of formed surface, are proposed. Consequently, the shape error is in proportion to the punch size and is out of proportion to the objective curvature radius and the elastic pad thickness.

• Advances in nano research
• /
• v.8 no.2
• /
• pp.95-102
• /
• 2020

In this work the properties of iron oxide magnetic nanoparticles (MNPs) synthesized by electrochemical method using different water-alcohol proportions and alcohols have been investigated. The syntheses were carried out using 99% iron foils acting electrodes in a 0.04 M NaCl solutions at room temperature applying 22 mAcm^-2 on the working electrode, mostly obtaining magnetite nanoparticles. The impact of the electrolyte in the size of the synthesized MNPs has been evaluated by transmission electron microscopy (TEM), X-ray diffraction (XRD), chronopotentiometric studies, and magnetic characterization. The results have shown that nanoparticles can be obtained in the range of 6 to 26 nm depending on the type of alcohol and the proportions in the mixture of water-alcohol. The same trend has been observed for all alcohols. As the proportion of these in the medium increases, the nanoparticles obtained are smaller in size. This trend is maintained until a certain proportion of alcohol: 50% for methanol, and 60% for the rest of alcohols, proportions where obtaining a single phase of magnetite is not favored.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 1999.04a
• /
• pp.114-117
• /
• 1999

The purpose of this study was to compare with the characteristics of Wumul-maru components in upper class Chosun dynasty. Physical trace method was used for this study. The samples were taken from the Sarang-taechong of 6 traditional Korean houses, Yunkyungdang, the ancient Chusa estate, Sunkyojand, Chunghyodang, Yangjindang, Unjoru. The major findings were summarized as follows; 1) Regarding to the scale characteristics, the number of changguit'ul(long board) was 1, chungguit'ul(middle-length board) 5, tongguit'ul(center board) 8m and maruno. 98, and the size of changguit'ul was 253$\times$4478mm, chungguit'ul 182$\times$2396mm, tongguit'ul 179$\times$2310mm, and marunol 247$\times$574mm. 2) Regarding to the proportion characteristics, the proportion of changguit'ul was 1:18.2, chungguit'ul 1:16.7, tongguit'ul 1:12.9, and marunol 1:2.62 and the proportion of components was 1:3:4:17.

• Journal of Korean Society on Water Environment
• /
• v.37 no.4
• /
• pp.286-295
• /
• 2021

The removal efficiency of road-deposited sediment (SDR) by road sweeping was analyzed by performing particle size analysis before and after road sweeping at four highways during May to December 2019. The SDR accounted for the largest proportion in the range of 250 to 850 ㎛ and the degree of its proportion had an effect on the particle size distribution curve. The particle size distribution of the collected sediments showed a similar distribution at all sites. Below 75 ㎛, the removal efficiency of SDR showed a constant value around 40%, but above 75 ㎛, it increased as the particle size increased. The removal efficiency was 82-90% (average 86%) for gravel, 66-93% (average 79%) for coarse sand, 35-92% (average 64%) for fine sand, 29-69% (average 44%) for very fine sand, 19-58% (average 40%) for silt loading, 10-59% (average 40%) for TSP, 13-57% (average 40%) for PM10, and 15-61% (average 38%) for PM2.5. SDR removal efficiency showed an average of 69% for the four highways. It was found that if the amount of SDR was less than 100 g/m², it was affected by the road surface condition and had a large regional deviation. As such, the amount of SDR and the removal efficiency increased. The fine particles, which have relatively low removal efficiency, contained a large amount of pollutants, which is an important factor in water and air pollution. Therefore, various measures to improve the removal efficiency of fine particles in SDR by road sweeping are needed.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.55 no.4
• /
• pp.320-326
• /
• 2019

The diet composition of Arctoscopus japonicus was studied using 448 specimens collected in the coastal waters of East Sea, Korea. The size of the specimens ranged from 6.2-25.3 cm in total length (TL). A. japonicus were fed mainly on amphipods that constituted 76.1% in IRI. Euphausiids were the second largest prey component. The diets also include small quantities of crabs, copepods, mysids, cephalopods, monogeneans, and fishes. A. japonicus showed ontogenetic changes in feeding habits. Smaller individuals (6-10 cm, TL) fed mainly on amphipods. The proportion of amphipods decreased as body size increased, whereas the consumption of euphausiids gradually increased (10-14 cm, TL). As the body size more increased, the proportion of amphipods increased whereas euphausiids decreased (14-26 cm, TL).

• Journal of the Korean Home Economics Association
• /
• v.26 no.4
• /
• pp.113-127
• /
• 1988

This paper attempts to investigate and analyze the change of the proportion of discretionary consumption expenditure (DCE) of main consumer goods among total household expenditure from 1964 to 1986 in Korea by reorganizing various data, particularly "Annual Report of Citizen's Household Experditure in Sooul".The result of the author's analysis can be summarized as follows. 1. The analysis shows that while the proportion of DCE in food has been increased during this period as the Korean economy developed, the value of income elasticity for beverages, liguor, out-door eating and processed food products which consist of major part of food, has been successively decreased. And also, though the absolute value of income elasticity for grain products has been increased, its proportion among total expenditure has been successively decreased. From these trends, we can conclude that general consumption pattern has a tendency to change from dependence on main grain products to the more utilization of out-door eating or processed food products. 2. The ratio of DEC of furnitures to housing expenditure has played a role of indicator of business cycle, reflecting the consumers' psychological expectation fro general economic trend. 3. In case of the proportion of DCE of clothes, there has been no great change. 4. As for as DCE of sundry expenditure is concerned, there has been no-great change in The proportion itself/ However. as the ratio of sundry expenditure to total household expenditure has been greatly increased, expenditure for leisure disproportionately increased. 5. The proportion of total DCE in total consumption expenditure, as in the case of housing, has been increased, which coincided exactly with business cyele appeared during this period. In fact, when Korea economy experienced a severe recession in 193 and 1980, that proportion deeply went down respectively, and again went up after those years. Accordingly, we can generalize that the size of DCE deperds on the formation of consumer's psychological expectation toward economy, which confirms George Katona's early proposition.

• Journal of the Korean Wood Science and Technology
• /
• v.26 no.1
• /
• pp.63-69
• /
• 1998

This study was carried out to get some basic information on mechanical properties of Korea Lepidobalanus for rational utilization of wood. Five species of Quercus variabilis, Q. aliena, Q. serrata, Q. mongolica, Q. acutissima belong to Lepidobalanus were investigated in this research. Relationship of anatomical characteristics to compression strength parallel to grain was analyzed using stepwise regression technique. All possible combination of 21 independent variables were regressed on compression strength parallel to grain. The summarized results in this study were as follows: I. In the proportion of wood structural elements, the factors that had the greatest influence on compression strength parallel to grain appeared to be proportion of ray in earlywood in Q. variabilis and Q. acutissima, proportion of wood fiber in latewood in Q. aliena and Q. serrata and proportion of vessel in earlywood in Q. mongolica respectively. 2. In the size of wood element and its structure, the factors that had the greatest influence on compression strength parallel to grain were microfibril angle in Q. variabilis, Q. serrata and Q. mongolica and length of wood fiber in Q. aliena and Q. acutissima.

• The Journal of Korean Academy of Prosthodontics
• /
• v.35 no.1
• /
• pp.144-164
• /
• 1997

The purpose of this study were to investigate the chemical composition, mean particle size, linear thermal expansion coefficient and metal-bonding strength of the regular opaque powder and core powder. In this study, 4 types of ceramic powders, namely Duceram Jacket Opaque powder, Duceram Opaque powder, Vita Hi-Ceram powder, Vita VMK Paint On-88 powder were used. Chemical composition was evaluated by EDS(Energy Dispersive X-ray Spectrophotometer, Oxford QX-2000, England), particle size was measured by MALVERN Instruments(MALVERN Instruments SB. OC., U.S.A.. ad linear thermal expansion coefficient was measured by dilatometer(Motoyama, Japan). Bond strength was measured by the Universal tsting machine(Istron Co., Ltd., U.S.A.). The Results were as follows : 1. Through recognition of the relative difference in chemical composition between the core powder and the regular opaque powder, the difference in the proportion of $Al_2O_3$ in each type of material is demonstrated ; Duceram Jaket Opaque powder : 30.16%, Duceram Opaque powder : 16.60%, Vita Hi-Ceram : 63.64%, Vita VMK Paint-On 88 : 16.16%. 2. There was no significant difference in the proportion of metal-bonding materials between the core powder and the regular opaque powder. 3. In the regular opaque powder, alkaline materials were incoporated in order to increase the coefficient of thermal expansion. 4. In the particle size analysis, there was no significant difference in mean particle size or in the particle size distribution between the core powder and the regular opaque powder. 5. In the thermal expansion test for temperature range of $25-600^{\circ}C$, the regular opaque powder had higher coefficient of thermal expansion than that of core powder. 6. In the 4 point flexural bending test, there was no statistically significant difference in the mean bond strength between the core powder and the opaque powder among the Duceram products.