• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.877-882
• /
• 2010

This paper is a result of investigating causes and main characteristics of landslides, occurred at Hongcheon area in Gangwondo during July in 2006, by collecting relevant data and visiting site. The main cause of landslides in this area has been found to be saturation of the ground wetted by a series of precipitations during 10~13 July and the heavy rainfall during 15 July. The pattern of the landslides could be classified as translational failure, occurred at the boundary between the relatively thin weathered residual soil and the mother rock. By analyzing a number of failed slopes based on site visit and reviewing collected data, typical widths of failed slopes are in the range of 10~20m (minimum: 5m, maximum: 70m). Lengths of landslide area are in the wide range of 10~450m. Most of area are less than 20m in width and 100m in length so that their shapes are long and narrow, frequently observed in Korea, and their areas are relatively small size of around $1000m^2$. The inclinations of the failed slopes are in the range of $10{\sim}60^{\circ}$ while the most probable slope angle is about $20{\sim}25^{\circ}$.

• The Korean Journal of Ecology
• /
• v.21 no.4
• /
• pp.337-344
• /
• 1998

To select tolerant species among the Korean major woody plants for restoring disturbed ecosystems by air and soil pollution, we transplanted the seedlings of 56 species in control and polluted sites within Yeocheon industrial complex area, and compared their aboveground growth characteristics such as total branch length, total leaf weight, and maximum photozynthetic rate. Tolerant species growting better in polluted site than in control site was Quercus variabilis, Pinus thunbergii, Q. aliena, P. densiflora, Styrax japonica, Alnus firma, Celtis sinensis, Elaeagnus umbellata, Q. serrata, japonica, Sorbus alnifolia, and Q. acutissimia in local tree occuring within polluted area group (80%), Ailanthus altissima in street tree group (20%), Populus tomentiglandulosa and A. hirsuta var. sibirica in fast growing tree group (50%), Acer ginala and Abies holophylla in late successional tree group (20%), Betulla platyphylla var. japonica, Acer truncatum, A. palmatum, Syringa dilatata, and Rosa multifora in garden tree group (38%), and Q. rubura, and Robinia pseudoacacia in foreign restoring tree group (20%), respectively. The remaining plant species, 37 species (57% of total species), were classified into sensitive species to pollution. Those tolerant species can be utilized for restoration of the degraded ecosystem in this polluted area.

• Structural Engineering and Mechanics
• /
• v.29 no.6
• /
• pp.689-707
• /
• 2008

This study presents a method to evaluate the seismic risk of an extradosed bridge with seismic isolators of lead rubber bearings (LRBs), and also to show the effectiveness of the LRB isolators on the extradosed bridge, which is one of the relatively flexible and lightly damped structures in terms of seismic risk. Initially, the seismic vulnerability of a structure is evaluated, and then the seismic hazard of a specific site is rated using an earthquake data set and seismic hazard maps in Korea. Then, the seismic risk of the structure is assessed. The nonlinear seismic analyses are carried out to consider plastic deformation of bridge columns and the nonlinear characteristics of soil foundation. To describe the nonlinear behaviour of a column, the ductility demand is adopted, and the moment-curvature relation of a column is assumed to be bilinear hysteretic. The fragility curves are represented as a log-normal distribution function for column damage, movement of superstructure, and cable yielding. And the seismic hazard at a specific site is estimated using the available seismic hazard maps. The results show that in seismically-isolated extradosed bridges under earthquakes, the effectiveness of the isolators is much more noticeable in the columns than the cables and girders.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.10 no.2
• /
• pp.57-62
• /
• 1992

As population is increased, land use types are changed mountainous areas from flatland in Korea. Because natural disaster as landslides occur of life, property, and environmental damage, prediction of landslides have become increasingly important. We focus on the issue for assessment of landslides, not slope stability analysis for a simple slope site. In this study, we could know the correlations of mean, standard deviation for brightness value of imagery by aerial photo scanning. The range of brightness values and standard deviation of landslide area is 35~65 and tend to increment of value, in the every years. When evaluating large regions with past occurrence of landslides, it is possible to search for correlation of site conditions such as degree of slope, soil characteristics, vegetative cover, and rainfall conditions in aerial photo interpretation data.

• Journal of the Society of Disaster Information
• /
• v.4 no.2
• /
• pp.138-154
• /
• 2008

The conventional non-dig underground structure building method which made an appearance to reduce the social and environmental costs and maximize the efficiency of the social overhead capital facilities could not help being uneconomical because of many problems such as unnecessary excessive excavation, water leakage, obstacle interference, difficulty of curvilinear application and connection complexity between propelled and injected bodies due to indiscriminate application of small and large circular steel pipes without consideration of the site conditions. The T.S.T.M, in which a protruded square tube is applied as a propulsion and injection body in a design that considered site conditions such as ground condition, depth of soil and live load, was able to be economical as it solved the problems of water resistance, minimization of obstacle interference and curvilinearity, and we can see that it can be applied to all grounds by utilizing or complementing the target ground in terms of engineering. Also in configuring the transverse section, it is possible to not only secure excellent structural safety but also implement all of the above engineering characteristics not only in the square cross section but also in the arch cross section, so it was possible to build structures on any section or ground, and we could confirm the LCC reduction effect and the VE effect.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.19 no.4
• /
• pp.479-489
• /
• 2021

The Republic of Korea is expected to participate in the denuclearization verification activities by the International Atomic Energy Agency (IAEA) in case any neighboring countries declared denuclearization. In this study, samples for the verification of nuclear activities in undeclared areas were selected for the denuclearization of neighboring countries, and the appropriateness of the procedures was considered. If a country with nuclear weapons declares denuclearization, it must be accompanied by the IAEA's verification regarding nuclear materials and weapons in the declared and undeclared areas. The analysis of the process samples or on-site environmental samples and the verification of undeclared nuclear facilities and materials aid in uncovering any evidence of concealment of nuclear activity in undeclared areas. Therefore, a methodology was established for effective sampling and analysis in accordance with proper procedures. Preparations for sampling in undeclared areas were undertaken for various potential scenarios, such as, the establishment of zones according to radiation dose, methods of supplying electricity, wireless communication networks, targets of sampling according to characteristics of nuclides, manned sampling method, and unmanned sampling method. Through this, procedures were established for pre- and post-site settings in preparation for hazards and limiting factors at nuclear inspection sites.

• Journal of Korea Soil Environment Society
• /
• v.2 no.3
• /
• pp.3-21
• /
• 1997

The remediation of contamiated sites using currently available remediation technologies requires long term treatment and huge costs, and it is uncertain to achieve the remediation goal to drop contamination level to either back-ground or health-based standards by using such technologies. Intrinsic remediation technology is the remediation technology that relies on the mechanisms of natural attenuation for the containment and elimination of contaminants in subsurface environments. Initial costs for the intrinsic remediation may be higher than conventional treatment technologies because the most comprehensive site assessment for intrinsic remediation is required. Total remediation cost, however may be the lowest among the presently employed technologies. The applicability of intrinsic remediation in the contaminated sites should be theroughly investigated to achieve the remedial goal of the technology. This paper provides the frame of the extended site assessment procedure based on knowledge of biodegradability to evaluate the applicability of intrinsic remediation. This site assessment procedure is composed of 5 steps such as preliminary site screening, assessment of the current knowledge of biodegradability, selecting the appropriate approach, analyzing the contaminant fate and transport and planning the monitoring schedule. In the step 1, followings are to be decided 1) whether to go on the the detailed assessment or not based on the rules of thumb concerning the biodegradability of organic compounds, 2) which protocol document is selected to follow for detailed site assessment according to the site characteristics, contaminants and the relative distance between the contamination and potential receptors. In the step 2, the database for biodegradability are searched and evaluated. In the step 3, the appropriate biodegradability pathways for the contaminated site is selected. In the step 4, the fate and transport of the contaminants at the site are analyzed through modeling. In the step 5, the monitoring schedule is planned according to the result of the modeling. Through this procedure, users may able to have the rational and systematic informations for the application of intrinsic remediation. Also the collected data and informations can be used as the basic to re-select the other remediation technology if it reaches a conclusion not to applicate intrinsic remediation technology at the site from the site assessment procedure.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.1164-1171
• /
• 2010

Korea is considered to be a seasonal frozen soil area that is thawed in the spring, and most of the area is frozen in winter as to the characteristic of geography. In the current design codes for anti-freezing layer, the thickness of anti freezing layer is calculated by freezing depth against the temperature condition. Therefore, they have a tendency of over-design and uniform thickness without the considerations of thermal stability, bearing capacity and frost susceptibility of materials. So, it is essential for studying the appropriateness and bearing capacity besides the seasonal and mechanical properties of pavement materials to take a appropriate and reasonable design of the road structure. In this research, the evaluation of frost susceptibility on subgrade, ant-freezing layer, sub base was conducted by means of the mechanical property test and laboratory field road model downed scale experiment. The temperature, heaving amount, heaving pressure and unfrozen water contents of soil samples, the subgrade, anti-freezing layer, sub base soils of highway construction site, were measured to determine the frost susceptibility.

• Geotechnical Engineering
• /
• v.4 no.1
• /
• pp.37-48
• /
• 1988

This is a part of research projects to investigate the several significant statistical correlati- onships among the various physical and engineering properties of alluvial clayey deposits in the estuary area of the great fixe rivers through the South-West coastal districts where are expected to be developed as large ingustrial site or agricultual development projects. As a first trial, the statistical analyses through computer programs were carried out using the results of laboratory and field tests of 227 soil samples from the Seum-Jin river area. When the initial void ratio which plays crucial role to the settlement of foundation is more than 2.5, the compression indices of soil samples are remarkably scattered, but these indices, which are formulated as a general expression, tend to increase as increasing the clay content, liquid limit, plastic limit and initial void ratio.

• Journal of Environmental Science International
• /
• v.23 no.4
• /
• pp.605-613
• /
• 2014

In this work, the delay time for groundwater recharge was estimated by comparing simulated recharges by means of SWAT(Soil and Water Assessment Tool) model and WTF(Water Table Fluctuation) method. The delay time for groundwater recharge means that the time when the water from rainfall travelled through vadose zone just after getting out of soil zone bottom. As measuring this delay time is almost impossible, we used to compare the estimated values from modeling(SWAT) and analytic method(WTF). The test site is Hancheon watershed which has 8 groundwater measurement stations. The results show that the altitude has a linear relationship with the estimated delay time values. To validate these results, we conducted corelation analysis between transformed groundwater levels and observed ones. The results showed that computed groundwater levels have good corelation($R^2$=0.97, 0.87, respectively). The estimated delay time would be used for the groundwater behaviour characteristics in vadose zone. As recharge rates vary according to the height, the delay time is thought to be an import variable for the proper groundwater recharge estimation.