• Journal of Power System Engineering
• /
• v.18 no.3
• /
• pp.87-92
• /
• 2014

This study is aimed at investigating the thermal behavior of immersion-cooled high power LED lighting engines. 3D CFD models have been generated for the numerical analysis. Five cases in terms of the configuration of LED chips have been explored for various passive cooling conditions of the lighting engine, i.e., the natural air convection with a lens, the natural air convection without a lens, the deionized water-immersion cooling condition with a lens. The numerical study reveals that the deionized water-immersion cooled lighting engine has nearly twice better thermal performance than the natural air convection cooled lighting engine containing a lens. The investigation has also demonstrated that the four chips configuration has the better thermal performance than the single chip configuration.

• Journal of Electrical Engineering and information Science
• /
• v.2 no.4
• /
• pp.8-13
• /
• 1997

This paper describes a scalable systolic synchronous memory for digital signal processing and packet switching. The systolic synchronous memory consists of the 2-D array of small memory blocks which are fully pipelined and communicated in three directions with adjacent blocks. The maximum delay of a small memory block becomes the operation speed of the chip. The array configuration is scalable for the entire memory size requested by an application. it has the initial latency of N+3 cycles with NxN array configuration. We designed an experimental 200 MHz 4Kb static RAM chip with the 4x4 array configuration of 256 SRAM blocks. It was fabricated is 0.8$\mu\textrm{m}$ twin-well single-poly double-metal CMOS technology.

• ETRI Journal
• /
• v.27 no.5
• /
• pp.647-650
• /
• 2005

A new configuration to realize the most general n-th order voltage transfer function is proposed. It employs only one operational transresistance amplifier (OTRA) as the active element. In the synthesis of the transfer function, the RC:-RC decomposition technique is used. To the best of author's knowledge, this is the first topology to be used in the realization of n-th order transfer function employing single OTRA.

• Journal of Korean Society for Quality Management
• /
• v.13 no.2
• /
• pp.29-36
• /
• 1985

The problem of selecting the gamma population with the largest mean out of k gamma populations, each of which has the same shape parameter is considered. An elimination type two-stage procedure is proposed which guarantees the same probability requirement using the indifference-zone approach as does the single-stage procedure of Gibbons, Olkin and Sobel (1977). The two-stage procedure has the highly desirable property that the expected total number of observations required by the procedure is always less than that of the corresponding single-stage procedure regardless of the configuration of the population parameters.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.1
• /
• pp.1-7
• /
• 1998

In this paper, an incoherent imaging of a conducting cylinder illuminated by the single-frequency time-harmonic plane wave is obtained via the back-projections of the intensity patterns of the forward total electric field scattered from this object in the circular rotational measurement configuration. The pheonmenon that interference fringes generated in the itesity patterns is removed in the back-projection process is interpreted numerically. This imaging method is validated by imagining conducting circular cylinders and the conditions to ge beter image are investigated.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.362-365
• /
• 1999

In this paper, the method of reducing harmonics and correcting of power factor in single PWM converter associated with diode rectifier and boos converter is studied. The ac-dc converter in which the harmonic distortion in the input current is reduced using a third harmonic injected PWM is proposed. A lower switching power loss and easy configuration o control circuit are obtained by adopting discontinuous current mode. Simulation and experimental results of ac-dc converter with 5[KHz] switching frequency are presented and correction of power factor and reduction of total harmonic distortion was established.

• Proceedings of the KIEE Conference
• /
• 1993.11a
• /
• pp.353-355
• /
• 1993

A single-mode fiber-optic interferometer for measuring small vibrations was constructed. The interferometer is based on the Fabry-Perot configuration that uses a single mode bidirectional fiber coupler as a beam splitter and employs peak detection scheme in the signal processing. The instrument was used to measure the displacement of the translator clamped to a piezo crystal.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10b
• /
• pp.928-933
• /
• 1988

Control technology has been making remarkable progress in electrical control (E), instrumentation & control (I) and computer control (C) field respectively. In order to rationalize system engineering and simplify system configuration and operation work, so called, EIC are now to be integrated into one system. FUJI has developed it's own E, I&C integrated system, to meet above mentioned market requirements of variety. This paper describes basic concept of FUJI's Integrated Man-Machine Interface, hereinafter called SINGLE CONSOLE, from some view points of E, I, C integration technology.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 1999.11a
• /
• pp.181-183
• /
• 1999

This paper is about the design of half-bridge inverter controller with low cost and simple configuration for low power single-phase induction motor driving. The simple controller is composed of MCU and PLD. Also, to limit the overcurrent at initial driving, auxiliary function is added, and stabilizes the system. In order to verify the performance of the proposed methode, we design 500W inverter system, and in result, the response time of the proposed method compared with line voltage driving method is reduced by 200[msec].

• Bulletin of the Korean Chemical Society
• /
• v.17 no.8
• /
• pp.682-685
• /
• 1996

Photothermal properties depend on the characteristics of energy transfer processes in solution. In this study, a time-resolved single beam thermal lens experiment in various solvents is employed to investigate the energy coupling effects which govern the energy transfer processes. Interestingly, it is observed that the behaviour of the photothermal propagation in solution depends on the property of solution and the concentration of solute in a single beam thermal lens configuration. These characteristics lead us to consider the solute-solvent coupling effects as well as the solvent-solvent interactions.