• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.171-174
• /
• 2006

A large number of service providers in countries all over the world have established GNSS reference station networks in the last years and are using network software today to provide a correction stream to the user as a routine service. In current GNSS network processing, all the geometric related information such as ionospheric free carrier phase ambiguities from all stations and satellites, tropospheric effects, orbit errors, receiver and satellite clock errors are estimated in one centralized Kalman filter. Although this approach provides an optimal solution to the estimation problem, however, the processing time increases cubically with the number of reference stations in the network. Until now one single Personal Computer with Pentium 3.06 GHz CPU can only process data from a network consisting of no more than 50 stations in real time. In order to process data for larger networks in real time and to lower the computational load, a federated filter approach can be considered. The main benefit of this approach is that each local filter runs with reduced number of states and the computation time for the whole system increases only linearly with the number of local sensors, thus significantly reduces the computational load compared to the centralized filter approach. This paper presents the technical aspect and performance analysis of the federated filter approach. Test results show that for a network of 100 reference stations, with the centralized approach, the network processing including ionospheric modeling and network ambiguity fixing needs approximately 60 hours to process 24 hours network data in a 3.06 GHz computer, which means it is impossible to run this network in real time. With the federated filter approach, only less than 1 hour is needed, 66 times faster than the centralized filter approach. The availability and reliability of network processing remain at the same high level.

• Journal of Navigation and Port Research
• /
• v.27 no.4
• /
• pp.431-436
• /
• 2003

It's about time we had to think an alternative to recover out insufficient fishery market caused by IMF locally as well as the fishery agreement on Japan and China. The Ministry of Maritime Affairs ＆ Fisheries have planning the advancing fishery information integrated system for the fishing present condition, marine resource administration and applicability consideration. The fishery information communication system is build up to the raw data ＆ process-network-content. The communication system must be small size, low cost and adapted SSB transceiver, that is using fishery shipping. In this paper We present digital data communication network to exchange information for fishery and safety between fishing ship and coast station in cheeper communication fee using SSB(single Side Band) in HF(High Frequency) band.

• Journal of the Korean Society of Tobacco Science
• /
• v.10 no.2
• /
• pp.117-122
• /
• 1988

This experiment was conducted to study the nature of gene effects for the leaf characters in flue-cured tobacco. The genetic populations were derived from crosses between NC 2326 and Mc Nair 373, and NC 628 and DG-72. The generation means experiment Included the Pl, P2. Fl, F2, Bl and B2, which were frown at Taegu Experiment Station, Korea Ginseng & Tobacco Research Institute in 1984. Seedlings were transplanted to the field in a randomized block design with 3 replications. In each block, parental and Fl Plots contained 15 plants in a single row, F2, Bl and B2 plots being composed of 75 plant, in 5 rows. Leaf characters were measured of largest (middle leaf) and 5th leaf(top leaf) from the top after topping. Measurements of the length and width of leaf were obtained from the fresh the middle and top leaves, and weight of leaf, weight and width of midrib were from the satrap leaf after curing. Estimates of additive and dominance genetic variance were analyzed according to Gamble's biometrical model. The results obtained are as follows: 1. The additive gene effects were significant and larger than the dominance gene effects for all leaf and midrib characters in both stalk positions. 2. The dominance gene effects were significant for the length and width of leaf, and weight of midrib in the middle leaves. 3. The digenic epistatic effects were significant for the length and width of leaf in both stalk positions. 4. The additive gene effects were larger in the top than in the middle leaves and midrib characters.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 1997.11a
• /
• pp.439-449
• /
• 1997

Studies have been carried out to determine the effect of sprinklers on fires typical of a number of occupancies including simulated of office furniture, supermarkets, carpet displays, libraries, video stores and liquor stores. After surveys of actual fire loads, the experiments were conducted in a specially designed sprinklered fire-calorimeter with a collecting hood 6 m x6 m leading to a vertical duct 1 m in diameter. Details of the rig are given elsewhere [1]. Only well ventilated fires were studied. Rate of heat release and production of various toxic chemicals were monitored during the tests. Both sprinklered and unsprinklered fires were used. The results were used to establish the unsprinklered burning behaviour and the fire-control effects of sprinklers. Before sprinkler operation, the rate of fire growth could be modelled as 12_fires as given in NFPA 92B (1991 Edition) [2]. It was found that operation of sprirnklers controlled but did not extinguish the fires. This was expected as parts of the fire load were shielded from the spray. Also there were significant increases in the concentration of carbon monoxide when the sprinklers operated. Sprinklers had little effect on the concentrations of other toxic products measured. The results from the tests were extrapolated to large single storey buildings for the same occupancy classes and the results used to compare the required and the available escape times for different occupancies, particularly whether the use of sprinklers would improve the chances of escape from those premises. It was found that in most of the cases studied, adequate escape times will be available without any special measures. For very rapid fire growths, however, special measures, such as availability of trained staff may be needed. Standard response sprinklers will have little impact.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.1
• /
• pp.75-79
• /
• 2010

Wireless sensor networks (WSN) are widely used in many applications. WSN acquires the data of surrounding environments with sensors attached to each node. It is important to design sensor networks that can communicate energy-efficiently as well as to get sensor readings with high accuracy. In this paper, we propose a novel routing scheme that assures high accuracy and significantly reduces data transmission costs in WSN with faults. First, we organize a number of network topologies randomly for routing sensor readings to the base station. Because every sensor node is connected each other with a single path, redundant transmissions are not incurred. It can reduce unnecessary transmissions and guarantee final sensor readings with high accuracy. To show the superiority of our scheme, we compare it with an existing multi-path routing scheme. In the result, our scheme has similar accuracy as the existing scheme and reduces unnecessary data transmissions by about 70% over the existing technique.

• Geomechanics and Engineering
• /
• v.19 no.2
• /
• pp.153-165
• /
• 2019

A case study of monitoring and analysis of surface settlement induced by tunneling of Tabriz metro line 2 (TML2) is presented in this paper. The TML2 single tunnel has been excavated using earth pressure balanced TBM with a cutting-wheel diameter of 9.49 m since 2015. Presented measurements of surface settlements, were collected during the construction of western part of the project (between west depot and S02 station) where the tunnel was being excavated in sand and silt, below the water table and at an average axis depth of about 16 m. Settlement readings were back-analyzed using Gaussian formula, both in longitudinal and transversal directions, in order to estimate volume loss and settlement trough width factor. In addition to settlements, face support and tail grouting pressures were monitored, providing a comprehensive description of the EPB performance. Using the gap model, volume loss prediction was carried out. Also, COB empirical method for determination of the face pressure was employed in order to compare with field monitored data. Likewise, FE simulation was used in various sections employing the code Simulia ABAQUS, to investigate the efficiency of numerical modelling for the estimating of the tunneling induced-surface settlements under such a geotechnical condition. In this regard, the main aspects of a mechanized excavation were simulated. For the studied sections, numerical simulation is not capable of reproducing the high values of in-situ-measured surface settlements, applying Mohr-Coulomb constitutive law for soil. Based on results, for the mentioned case study, the range of estimated volume loss mostly varies from 0.2% to 0.7%, having an average value of 0.45%.

• Geophysics and Geophysical Exploration
• /
• v.8 no.1
• /
• pp.34-40
• /
• 2005

We have used the microtremor method, with arrays of up to 96 m diameter, to carry out non-invasive estimation of shear-wave velocity profiles to a depth of 30 to 50 m in unconsolidated Quaternary Yarra Delta sediments. Two silt units (Coode Island Silt, and Fishermans Bend Silt) dominate our interpretation; the method yields shear velocities for these units with precision of $5\%$, and differentiates between the former, softer unit ($V_s$=130 m/sec) and the latter, firmer unit ($V_s$=235 m/sec). Below these silts, the method resolves a firm unit correlating with known gravels ($V_s$ 500 to 650 m/sec). Using surface traverses with the single-station H/V spectral ratio method, we show that the variation in thickness of the softer silt can be mapped rapidly but only qualitatively. The complexity of the geological section requires that array methods be used when quantitative shear-wave velocity profiles are desired.

• Journal of the Society of Disaster Information
• /
• v.14 no.4
• /
• pp.440-449
• /
• 2018

Purpose: This study aims to design and verify an onsite EEWS that extracts the P-wave from a single seismic station and deduce the PGV. Method: The P-wave properties of Pd, Pv, and Pa were calculated by using 12 seismic waveform data extracted from historic seismic records in Korea, and the PGVs were computed using empirical equation on the P properties - PGV relationship and compared with the observed values. Results: Comparison of the observed and estimated PGVs within the alarm level shows the error rate of 86.7% as minimum. By reducing the PTW to 2 seconds, the alarm time can be shortened by 1 second and the seismic blind zone near the epicenter can be shortened by 6 Km. Conclusion: Through this study, we confirmed the availability of the on-site EEWS in Korea. For practical use, it is necessary to develop regression formula and algorithm reflect local effect in Korea by increasing the number of seismic waveform data through continuous observation, and to eliminate the noise from the site.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.1
• /
• pp.189-194
• /
• 2021

With the recent increase in the proportion of single-person households, starting in 2016, the domestic shared personnel mobility market such as electric kickboards and electric wheels has grown rapidly. Personal transportation means such as electric kickboards are power devices using electricity and are eco-friendly, lightweight, and do not occupy a separate parking space. Above all, it has the advantage of being convenient to travel short and medium distances, so it has been able to obtain a lot of demand from younger users who pursue reasonable consumption, and accordingly, the related market has grown rapidly. However, as absence of the charging station for electric kickboards, electric kickboards are left everywhere on the road, and are emerging as a threat to safety as well as aesthetics. Therefore, this paper aims to research and propose a new IoT management system for efficient recovery of shared electric kickboards. Through this system, it is expected that the high recovery rate of the electric kickboard can be maintained, and in conclusion, the safety of the user and the surrounding environment can be improved.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.3
• /
• pp.430-435
• /
• 2022

In this paper, we consider the non-orthogonal multiple access (NOMA) technique in the heterogeneous network (HetNET) consisting of a single macro base station (BS) and multiple small BSs, where the perfect successive interference cancellation is assumed for the NOMA signals. In this paper, we propose a deep learning-based user association and power allocation scheme to maximize the data rate in the NOMA-based HetNET. In particular, the proposed scheme includes the deep neural network (DNN)-based user association process for load balancing and the DNN-based power allocation process for data-rate maximization. Through the simulation assuming path loss and Rayleigh fading channels between BSs and users, the performance of the proposed scheme is evaluated, and it is compared with the conventional maximum signal-to-interference-plus-noise ratio (Max-SINR) scheme. Through the performance comparison, we show that the proposed scheme provides better sum rate performance than the conventional Max-SINR scheme.