• Journal of Communications and Networks
• /
• 제11권3호
• /
• pp.279-286
• /
• 2009

This paper proposes an adaptive mode switching algorithm between two strategies in multiple antenna cellular networks:A single-user mode and a multi-user mode for the broadcast channel. If full channel state information is available at the base station, it is known that a multi user transmission strategy would outperform all single-user transmission strategies. In the absence of full side information, it is unclear what the capacity achieving method is, and thus there are few criteria to decide which of the myriad possible methods performs best given a system configuration. We compare a single user transmission and a multi user transmission with linear receivers in this paper where the transmitter and the receivers have multiple antennas, and find that neither strategy dom inates the other. There is instead a transition point between the two strategies. Then, the mode switching point is determined both ana lytically and numerically for a multiple antenna cellular downlink with correlation between transmit antennas.

• 전력전자학회논문지
• /
• 제26권3호
• /
• pp.176-182
• /
• 2021

This research proposes a high-frequency circuit that can accurately predict the differential mode noise of single-phase inverters at the circuit design stage. Proposed single-phase inverter high frequency circuit in the work is a form in which harmonic impedance components are added to the basic single-phase inverter circuit configuration. For accurate noise prediction, parasitic components present in each part of the differential noise path were extracted. Impedance was extracted using a network analyzer and Q3D in the measurement range of 150 kHz to 30 MHz. A high-frequency circuit model was completed by applying the measured values. Simulations and experiments were conducted to confirm the validity of the high-frequency circuit. As a result, we were able to predict the resonance point of the differential mode voltage extracted as an experimental value with a high-frequency circuit model within an approximately 10% error. Through this outcome, we could verify that differential mode noise can be accurately predicted using the proposed model of the high-frequency circuit without a separate test bench for noise measurement.

• 토지주택연구
• /
• 제11권2호
• /
• pp.1-14
• /
• 2020

The aim of this study is to empirically identify the differentiating characteristics of determinant factors on sing-person households' commuting mode choice compared to multi-person households' one in order to establish the customized police directions to decrease private car use in commuting. While the study use the 2% sample survey data on the population and housing in 2015, it employ multinomial logit models on relative choice probability of such alternative commuting modes as bus, subway or rail, and walking, rather than driving. As potential determinant factors, the study employs demographic, socio-economic, and housing and residential one for both models of single-person and multi-person households. The study finds that the behavior of commuting mode choice has distinctive difference by gender, marriage status, physical activity constraint, job type, residential period in current housing of the single-person household's workers compared to the multi-person households' ones. Based on the findings, the study deduce ten commuting policy directions customized for the single-person household.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(2)
• /
• pp.149-152
• /
• 2000

A dual-mode multiplier (DMM) that performs single- and double-precision multiplications has been designed. An algorithm for efficiently implementing double-precision multiplication with a single-precision multiplier was proposed, which is based on partitioning double-precision multiplication into four single-precision sub-multiplications and computing them with sequential accumulations. When compared with conventional double-precision multipliers, our approach reduces the hardware complexity by about one third resulting in small silicon area and low-power dissipation at the expense of increased latency and throughput cycles.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.1118-1120
• /
• 2004

Various technologies for new reflective LCDs with high performance are reviewed in this paper. Among of them, reflective STN-LCDs with single polarizor, novel single polarizor reflective LCDs based upon R-IPS mode and VA(vertical aligned) mode reflective color TFT-LCDs are discussed comprehensively. In addition, some new technologies which are under developed for the moment are also introduced briefly, including single polorizor reflective AF-LCDs (Antiferroelectric LCD) and reflective LCDS with none polorizor. Finally, we research the method to optimize the reflective LCDs.

• 센서학회지
• /
• 제23권4호
• /
• pp.229-233
• /
• 2014

In this study, a V-grooved single-mode fiber along with optical time domain reflectometry (OTDR) as a quasi-distributed temperature sensor was investigated. The external medium used to fill the V-groove affects the optical mode. The V-groove was filled with ethylene vinyl acetate (EVA) because its transmittance was sensitive to temperature. The experimental results showed that the optical loss of the sensor varies with temperature, and the sensitivity depends on the depth of the V-groove.

• Journal of Electrical Engineering and Technology
• /
• 제4권2호
• /
• pp.287-291
• /
• 2009

In this paper, an optical switch/modulator is designed and its light propagating characteristics analyzed using a simplified BPM. The distinctive feature of this switch/modulator is that all its waveguide branches are designed as single-mode. The principle of the device is based on the coupled mode theory in the Y-junction interconnecting waveguide. In spite of the fact all waveguides are designed as single-mode, by adjusting the interconnecting waveguide length'of the device the same characteristics as existing up to date devices are obtainable. Numerical results show that the switching characteristics periodically depend upon an interconnecting waveguide length with a spatial of about $150^{{\mu}m}$ in the $Ti:LiNbO_3$ step index waveguide. The design concept would therefore be utilized effectively in fabricating a monolithic high density optical integrated circuit.

• 한국정보통신학회논문지
• /
• 제4권5호
• /
• pp.1143-1150
• /
• 2000

단정도 (single-precision) 승산과 배정도 (double-precision) 승산을 연산할 수 있는 이중 모드 승산기 (dual mode multiplier; DMM)를 $0.25-\mum$ 5-metal CMOS 공정으로 설계하였다. 단정도 승산기 회로를 사용하여 배정도 승산을 연산할 수 있는 효율적인 알고리듬을 제안하였으며, 이는 배정도 승산을 4개의 단정도 부분 승산으로 분할하여 순차적인 승산-누적 연산으로 처리하는 방법을 기초로 한다. 제안된 방법은 배정도 승산기에 비해 latency와 throughput cycle은 증가하나, 회로 복잡도를 약 113로 감소시킬 수 있어 칩 면적과 전력소모 측면에서 장점을 갖는다. 설계된 DMM은 radix-4 Booth receding과 redundant binary(RB) 연산을 적용하여 설계된 $28-b\times28-b$ 단정도 승산기, 누적기 그리고 동작모드 선택을 위한 단순한 제어회로 등으로 구성되며, 약 25,000개의 트랜지스터와 $0.77\times0.40-m^2$의 면적을 갖는다. 시뮬레이션 결과, 2.5-V 전원전압에서 200-MHZ의 클록 주파수로 안전하게 동작할 수 있을 것으로 예상되며, 평균 전력소모는 배정도 승산모드에서 약 130-㎽이 다.

• 전력전자학회논문지
• /
• 제18권6호
• /
• pp.579-586
• /
• 2013

This paper proposes a mode transition algorithm between the grid-tied and the stand-alone operations for the single-phase inverter with the energy storage system. For the grid-tied operation, the dc-link voltage and the output current are required to be control. For the stand-alone mode, both the output voltage and the output current should be regulated. In order to mitigate a falling-off in control performance during transients in mode change, the load power estimation and the current selection schemes are proposed. The proposed method allows an optimized current reference is selected to reduce an output voltage drop and an excessive over-current in transient. To verify the effectiveness of the proposed method, both the simulation and the experiments for a 3kW single-phase inverter with the energy storage system have been conducted. From the results, it has been confirmed that the proposed method reduces a transient error as well as implementing smooth mode transition.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 동계학술발표대회 논문집
• /
• pp.630-635
• /
• 2008

A dynamic model has been developed to investigate the operability of a single and double-effect solar energy assisted parallel type absorption chiller. In the study, main components and fluid transport mechanism have been modeled. Flow discharge coefficients of the valves and the pumps were optimized for the double-effect mode with solar-heated water circulated. The model was run for the single mode with solar energy supply only and the solar/gas driving double effect mode. And the cases of the double mode with and without the solar energy were compared. From the simulation results, it was found that the present configuration of the chiller is not capable of regulating solution flow rates according to variable solar energy input. And the single mode utilizing the solar energy only is not practical. It is suggested to operate the system in the double mode and the flow rate control system adaptive to variable solar energy input has to be developed.