• 제목/요약/키워드: Single Machine

검색결과 1,247건 처리시간 0.031초

교정용 브라켓과 교정선 사이의 마찰력 (Evaluation of frictional forces between orthodontic brackets and archwires)

  • 정태종;최목균
    • 대한치과교정학회지
    • /
    • 제30권5호
    • /
    • pp.613-623
    • /
    • 2000
  • 교정용 브라켓과 교정선 사이의 마찰력에 관련된 요소들에는 브라켓의 종류, 교정선의 재질과 형태, 결찰방법의 차이, 건조환경과 타액환경의 차이, 브라켓간 offset의 차이, 브라켓간 거리, 이동속도 등이 있다. 이러한 요소들에 따른 마찰력의 변화를 비교, 분석하여 각 요소들 간의 관계를 알아보고자 본 연구를 하였다. 8종류의 0.018"x0.025"상악 견치와 상악 제2 소구치용 브라켓을 슬라이드 위에 부착시키고 0.016 및 0.016"x0.022" 스테인레스 스틸 교정선과 같은 크기의 NiTi 교정선 및 Cu-NiTi 교정선을 이용하여 서로 다른 조건에서 마찰력을 측정하여 다음의 결과를 얻었다. 1. 브라켓의 종류에 따른 마찰력의 차이는 Polycrystalline세라믹 브라켓인 Allure의 평균 마찰력이 가장 높게 나타났고, 세라믹과 합성된 플라스틱 브라켓인 Vogue, 금속 브라켓인 Mini-Twin, 금속 슬롯을 갖는 플라스틱 브라켓인 Elan, monocrystalline 세라믹 브라켓인 Starfire, single 브라켓인 Lewis/Lang, 자가결찰 브라켓인 SPEED의 순으로 감소하였으며, frictionless 브라켓인 Shoulder의 평균 마찰력이 가장 낮았다. 자가결찰 브라켓은 원형 교정선에서는 낮은 마찰력을 나타냈고, 사각형 교정선에서는 높은 마찰력을 나타냈다. 2. 교정선 재질에 따른 평균마찰력은 스테인레스 스틸 교정선이 다른 교정선들에 비해 통계학적으로 유의하게 낮았으며, NiTi 교정선, Cu-NiTi 교정선 순으로 평균 마찰력이 높았다. 교정선의 형태에 따른 마찰력은 원형 교정선의 평균마찰력이 각형 교정선보다 낮았다. 3. 본 연구에서 스테인레스 강으로 결찰했을 때의 평균마찰력이 탄성모듈로 결찰했을 때에 비해 모든 조건에서 통계학적으로 유의하게 높았다. 4. 건조환경에서의 금속 브라켓에 스테인레스 스틸 교정선, NiTi 교정선 및 Cu-NiTi교정선의 평균마찰력은 타액환경에서 보다 유의하게 낮았다. 5. 브라켓간 offset이 증가함에 따라 평균마찰력은 유의하게 증가하였다. 6. 브라켓간 거리의 변화에 대한 마찰력의 차이는 교정선의 재질에 따라 차이가 나며, 스테인레스 스틸 교정선은 브라켓간 거리가 감소할 때 마찰력이 유의하게 변화하지 않았으나, NiTi 교정선의 경우는 유의하게 증가하였다. 7. 브라켓내의 교정선의 이동속도에 따라 마찰력은 유의하게 변화하지 않았다. 이상의 결과로 볼 때 교정 치료동안 적정 교정력을 유지하기 위해 자가결찰브라켓, 스테인레스 스틸 교정선과 탄성모듈결찰법을 사용하는 것이 유리하며, 치료시기에 따라서 요구하는 마찰력이 다르므로 상황에 따라 재료를 선택하는 것이 중요할 것으로 사료된다.

  • PDF

자기공명분광법에서 TE와 Voxel 내의 대사물질 양에 따른 스펙트럼 변화 평가에 관한 연구 (Investigation of Varied MR Spectra by TE and Metabolite Amount in the Localized Voxel using the MR Cone-shape Phantom)

  • 우동철;김상수;임향숙;장건호;최보영
    • 한국의학물리학회지:의학물리
    • /
    • 제18권3호
    • /
    • pp.179-185
    • /
    • 2007
  • 본 연구는 자기공명분광법(Magnetic Resonance Spectroscopy: MRS)에 있어서 기존 개발된 Multi-Voxel Spectroscopy (MVS)을 위한 MR 원뿔형 팬톰을 Single voxel spectroscopy (SVS)용으로 개선하여 선정된 Voxel내의 대사물질의 양과 TE 변화에 따른 스펙트럼의 변화를 관찰하였다. 원뿔형 팬톰은 Voxel를 선정하는 위치에 따라서 그 안에 포함되는 대사물질의 양을 변화시킬 수 있다는 점에 착안하여 Voxel안에 포함되는 뇌대사물질의 양과 TE시간에 따른 각 대사물질(NAA, Cr, Cho, Lac 등)의 Peak에 대한 정량적인 분석을 시도하였다. 실험은 3T MRI/MRS 장비에서 이루어졌고, 데이터를 분석하는데 $jMRUI^{(R)}$라는 프로그램이 사용되었다. 실험 및 분석 결과 대체로 Echo Time (TE)가 커질수록 잡음이 감소하는 경향을 확인할 수 있었고 또한 TE가 커질수록, Voxel 안의 뇌대사물질의 양이 적을수록 각 대사물질의 peak intensity가 감소하는 것을 관찰할 수 있었다. 특히 Lactate의 경우, 정위선정된 Voxel안에 가장 많은 양의 대사물질이 포함되었을 때만 스펙트럼 분석이 가능한 정도의 Peak intensity를 얻을 수 있었고 대부분의 TE에서 분석 가능한 것으로 보아 각 대사물질의 intensity는 TE보다는 Voxel내의 대사물질의 양에 더욱 민감하다는 결론을 도출 할 수 있었고, 이러한 Lac에 대한 in vitro 데이터는 정량분석 시에 있어서 in vivo상에서 대사물질의 정량화를 하는 데 있어서 중요한 가이드라인을 제시할 것으로 예상된다. 그러나, 원뿔의 모서리 부분에 표면장력에 의하여 수많은 공기방울이 MR image상에서 관찰되고 또한 MRS상에서 그 스펙트럼을 얻을 수 없었는데 이는 앞으로 원뿔형 MRS 팬톰을 구조적, 기술적으로 더욱 개선해야 할 여지를 남겨두고 있다.

  • PDF

DS/CDMA 모뎀 구조와 ASIC Chip Set 개발 (A development of DS/CDMA MODEM architecture and its implementation)

  • 김제우;박종현;김석중;심복태;이홍직
    • 한국통신학회논문지
    • /
    • 제22권6호
    • /
    • pp.1210-1230
    • /
    • 1997
  • 본 논문에서는 기준신호를 나타내는 하나의 파일럿채널과 다수의 트래픽채널을 갖는 DS/CDMA용 송수신기구조를 제안한다. 파일럿채널은 데이타 변조가 되지 않은 순수 PN 부호성분을 전송하며 수신단에서 PN 동기 및 동기복조의 기준신호로 이용한다. 또한 이러한 구조는 순방향뿐만 아니라 역방향 링크에도 적용된다. 제안된 DS/CDMA 방식의 특징은 다음과 같다. 첫째, 트래픽채널의 확산 방식은 I-phase 및 Q-phase의 확산부호를 파일럿채널의 그것과 교차하게 배치한 interlaced quardrature-spreading(IQS) 구조를 갖는데 이는 기존의 확산방식에 비해 데이타 신호의 영교차율을 줄여 송신단 출력신호 레벨의 변화를 작게한다. 둘째, PN부호의 초기동기 및 동기초적시 임계값을 적응적으로 자동설정하며, 초기동기시 PN 부호를 한 칩씩 이동하게 하여, 기존의 방식에 비해 초기동기 시간을 절반으로 줄이게 했으며, 수신부에서 PN 부호 발생기를 하나만 사용하여 초기동기 및 동기추적이 되게했다. 또한 state machine을 이용하여 재동기 timing을 자동설정 하도록 설계했다. 셋째, 본 방식에서는 자동주파수조절(automatic frequency control: AFC)기능, 입력신호의 크기에 따라 능동적으로 유효한 출력 레벨을 조절하는 자동 레벨조절(automatic level control: ALC)기능, bit-error-rate(BER)을 자동계산하는 기능, 인접 채널과의 간섭을 최소화하기 위한 스펙트럼 성형기능 등을 도입하여 사용자 편의를 도모했다. 넷째, 데이타 전송속도를 16Kbps~1.024Mbps로 가변이 되게함으로써 다양한 응용에 대처할 수 있게 설계했다. 한편, 본 논문에서 제안한 DS/CDMA 모뎀구조는 다양한 simulation을 통하여, 알고리즘 검증 과정을 거쳤으며, 제안된 DS/CDMA 모뎀 구조는 VHDL을 이용하여 ASIC으로 구현하였다. DS/CDMA용 ASIC은 송신부 ASIC과 수신부 ASIC으로 나누어 개발 하였으며, 한개의 ASIC당 3개의 채널을 동시에 수용할 수 있으며, 다수의 ASIC을 사용하여 여러 채널의 다중접속이 가능하다. 제작완료된 ASIC은 기능시험을 완료했으며 실제 line-of-sight(LOS) 시스템 구현에 적용중이다.

  • PDF

주제목록을 위한 한국용어열색인 시스템의 기능 (Function of the Korean String Indexing System for the Subject Catalog)

  • 윤구호
    • 한국문헌정보학회지
    • /
    • 제15권
    • /
    • pp.225-266
    • /
    • 1988
  • Various theories and techniques for the subject catalog have been developed since Charles Ammi Cutter first tried to formulate rules for the construction of subject headings in 1876. However, they do not seem to be appropriate to Korean language because the syntax and semantics of Korean language are different from those of English and other European languages. This study therefore attempts to develop a new Korean subject indexing system, namely Korean String Indexing System(KOSIS), in order to increase the use of subject catalogs. For this purpose, advantages and disadvantages between the classed subject catalog nd the alphabetical subject catalog, which are typical subject ca-alogs in libraries, are investigated, and most of remarkable subject indexing systems, in particular the PRECIS developed by the British National Bibliography, are reviewed and analysed. KOSIS is a string indexing based on purely the syntax and semantics of Korean language, even though considerable principles of PRECIS are applied to it. The outlines of KOSIS are as follows: 1) KOSIS is based on the fundamentals of natural language and an ingenious conjunction of human indexing skills and computer capabilities. 2) KOSIS is. 3 string indexing based on the 'principle of context-dependency.' A string of terms organized accoding to his principle shows remarkable affinity with certain patterns of words in ordinary discourse. From that point onward, natural language rather than classificatory terms become the basic model for indexing schemes. 3) KOSIS uses 24 role operators. One or more operators should be allocated to the index string, which is organized manually by the indexer's intellectual work, in order to establish the most explicit syntactic relationship of index terms. 4) Traditionally, a single -line entry format is used in which a subject heading or index entry is presented as a single sequence of words, consisting of the entry terms, plus, in some cases, an extra qualifying term or phrase. But KOSIS employs a two-line entry format which contains three basic positions for the production of index entries. The 'lead' serves as the user's access point, the 'display' contains those terms which are themselves context dependent on the lead, 'qualifier' sets the lead term into its wider context. 5) Each of the KOSIS entries is co-extensive with the initial subject statement prepared by the indexer, since it displays all the subject specificities. Compound terms are always presented in their natural language order. Inverted headings are not produced in KOSIS. Consequently, the precision ratio of information retrieval can be increased. 6) KOSIS uses 5 relational codes for the system of references among semantically related terms. Semantically related terms are handled by a different set of routines, leading to the production of 'See' and 'See also' references. 7) KOSIS was riginally developed for a classified catalog system which requires a subject index, that is an index -which 'trans-lates' subject index, that is, an index which 'translates' subjects expressed in natural language into the appropriate classification numbers. However, KOSIS can also be us d for a dictionary catalog system. Accordingly, KOSIS strings can be manipulated to produce either appropriate subject indexes for a classified catalog system, or acceptable subject headings for a dictionary catalog system. 8) KOSIS is able to maintain a constistency of index entries and cross references by means of a routine identification of the established index strings and reference system. For this purpose, an individual Subject Indicator Number and Reference Indicator Number is allocated to each new index strings and new index terms, respectively. can produce all the index entries, cross references, and authority cards by means of either manual or mechanical methods. Thus, detailed algorithms for the machine-production of various outputs are provided for the institutions which can use computer facilities.

  • PDF

Chlorhexidine 처리가 상아질 접착제의 미세인장결합강도에 미치는 영향 (EFFECT OF CHLORHEXIDINE ON MICROTENSILE BOND STRENGTH OF DENTIN BONDING SYSTEMS)

  • 오은화;최경규;김종률;박상진
    • Restorative Dentistry and Endodontics
    • /
    • 제33권2호
    • /
    • pp.148-161
    • /
    • 2008
  • 본 연구는 상아질 혼성층의 교원섬유를 가수분해하는 효소인 MMPs (Matrix metalloproteinses)의 억제제로 알려진 chlorhexidine (CHX)을 적용 후 결합강도를 측정하였으며, 이를 각각 열순환 처리 후 결합강도를 측정하였다. 또한 주사전자현미경으로 접착계면에서의 파괴 양상을 비교 분석하였다. 우식이 없는 발거한 32개의 제3대구치의 교합면 상아질을 노출시키고 GI그룹에서는 dentin conditioner를 처리 후 2% chlorhexidine을 적용시키고, 산부식 접착제 그룹에서는 인산 산부식을 시행하고 2% chlorhexidine을 적용 후 3단계 산부식형 상아질 접착제 (Scotchbond Multipurpose, SM), 2단계 산부식형 상아질 접착제 (Single Bond, SB)를 도포하고, 자가부식 접착제 그룹에서는 2% chlorhexidine 적용 후 자가부식 상아질 접착제 (Clearfil Tri-S, TS)를 도포한다. 이후 복합 레진 (Z-250)과 GI (Fuji-II LC)를 충전한 시편을 $1\;mm^2$의 단면을 갖는 beam으로 제작하여 열순환 하지 않거나, 10,000회 열순환 ($5\;{\sim}\;55^{\circ}C$)하였다. Universal testing machine (EZ-test; Shimadzu, Japan)에서 cross head speed 1 mm/min로 인장력을 가하여, 미세인장결합강도를 측정하였다. 실험 결과는 유의수준 0.05 level에서 two-way ANOVA를 이용하여 통계분석하였다. 그 후 파절된 시편의 파괴 양상을 현미경 (SEM)으로 관찰하여 다음과 같은 결론을 얻었다; 1. 2% CHX을 적용한 모든 실험군에서 상아질과의 미세인장결합강도가 증가하였고, 열순환은 상아질과의 미세인장결합강도를 감소시켰다 (P > 0.05). 2. CHX 적용 후 열순환 한 군은 CHX을 적용하지 않고 열순환한 군에 비하여 상아질과의 미세인장결합강도가 높았으며, 특히 GI와 TS군에서 유의한 차이를 나타내었다 (P < 0.05). 3. 파괴 양상 분석 결과, 혼성층에서의 접착성 파괴를 보이며, CHX을 적용하면 혼성층 기저부에서 상부로 파괴 부위가 옮겨가는 양상을 나타내었다. 이상의 연구 결과를 토대로, MMPs 억제제인 2% CHX은 글래스 아이오노머 시멘트와 상아질 접착제의 초기 미세인장결합강도에는 영향을 미치지 않으며, CHX 적용이 접착내구성을 유지하는데 도움이 되었다.

차아염소산 나트륨의 사용이 복합레진 수복물의 미세누출에 미치는 영향 (INFLUENCE OF A SODIUM HYPOCHLORITE GEL ON MICROLEAKAGE OF COMPOSITE RESIN RESTORATIONS)

  • 양계식;김대업;이광희;정영남
    • 대한소아치과학회지
    • /
    • 제30권1호
    • /
    • pp.54-60
    • /
    • 2003
  • 본 연구는 영구치와 유치의 상아질 표면에 상품화된 화학기계적 우식치질 제거용액인 $Carisolv^{TM}$(MediTeam, Sweden)를 사용하고 복합레진을 접착한 후 전단결합강도를 측정함으로써 $Carisolv^{TM}$의 사용이 복합레진의 접착에 미치는 영향을 평가하고자 하였다. 교정치료를 위하여 발거된 상, 하악 소구치 80개와 정상적으로 탈락한 손상이 없이 건전한 상악 유전치 80개의 순, 협면의 상아질을 노출시키고 $Carisolv^{TM}$를 실험군은 60초 적용하고 대조군은 $Carisolv^{TM}$를 사용하지 않았다. 상아질 접착제는 Scotchbond Multi-Purpose(3M, USA), Single Bond(3M, USA), Clearfil SE Bond(Kuraray, Japan), AQ Bond(Sun Medical, Japan)를 각각 제조사의 지시대로 적용하였고 광중합형 복합레진은 Z100(3M, USA)을 사용하였다. $5^{\circ}C$$55^{\circ}C$에 각 30초씩 계류시켜 1,000회 열순환시키고 Universal Testing Machine(Zwick Z020, Zwick Co., Germany)을 사용하여 전단결합강도를 측정하고 분석하여 다음과 같은 결론을 얻었다. 1. 각 군간 전단결합강도를 비교한 결과, 유치에 비해 영구치의 전단결합강도가 높게 나타났다. 영구치에서는 Clearfil SE Bond만 사용한 군에서 가장 높았고 $Carisolv^{TM}$와 AQ Bond를 병용한 군에서 가장 낮았다. 2. $Carisolv^{TM}$ 사용하지 않은 군과 사용한 군간의 전단결합강도를 비교한 결과, 영구치와 유치 모두에서 상아질 접착제의 종류에 관계없이 $Carisolv^{TM}$를 사용한 군이 사용하지 않은 군에 비해 전단결합강도가 통계학적으로 유의하게 낮게 나타났다(P<0.001). 3. 상아질 접착제의 종류에 따른 전단결합강도를 비교한 결과, 영구치와 유치 모두에서 Clearfil SE Bond를 사용한 군의 전단결합강도가 가장 높았으며 AQ Bond를 사용한 군의 전단결합강도가 가장 낮았다.

  • PDF

레이저 처리가 상아질과 복합 레진의 결합에 미치는 영향 (Effects of laser-irradiated dentin on shear bond strength of composite resin)

  • 김성숙;박종일;이재인;김계순;조혜원
    • 대한치과보철학회지
    • /
    • 제46권5호
    • /
    • pp.520-527
    • /
    • 2008
  • 목적: 이 연구는 산부식 대신 레이저로 표면처리를 하였을 때 복합레진과의 전단결합강도에 어떤 영향을 주는지 알아보기 위해 시행되었다. 재료 및 방법: 치아 우식증이 전혀 없는 건전한 최근에 발치된 대구치를 레진으로 매몰하고 상아질을 노출시킨 뒤 표면연마를 시행하 였다. 치아는 10개씩 4그룹으로 나누었다. 1) 아무 처리도 하지 않은 군, 2) 35% 인산으로 산부식한 군, 3) Er:YAG laser 레이저 처리된 군, 4) Er,Cr:YSGG laser로 처리된 군. 시편에 상아질 접착제 Single Bond2 (3M/ESPE)를 도포하고, 직경 3 mm, 높이 3 mm의 투명한 플라스틱관을 치아면 위에 두고 복합레진을 축성하였다. 모든 시편은 24시간동안 $37^{\circ}C$증류수에 보관 후 만능시험기를 이용하여 전단결합강도를 측정하였다. 결과: 레이저 처리시 각각 Er:YAG 레이저 처리는 $3.98{\pm}0.88$ MPa, Er,Cr:YSGG 레이저 처리는 $3.70{\pm}1.55$ MPa의 결합강도를 보였고, 통계적으로 유의한 차이를 나타내지 않았다. 아무 처리도 하지 않은 군의 결합강도는 $1.52{\pm}0.42$ MPa로 가장 낮은 결합강도를 나타내었고, 산처리를 한 군이 $7.10{\pm}1.86$ MPa로 가장 높은 전단결합강도를 보였으며, 이들은 레이저 처리한 군과 비교시 통계적으로 P < .001 유의수준에서 유의한 차이가 있는 것으로 나타났다. 결론: 치아와 레진의 전단결합강도 비교시 레이저 처리는 아무 처리도 않은 군에 비해서는 높지만 인산 etching보다 그 결합력이 떨어진다.

정치식 원적외선 건조기를 이용한 수수×수단그라스 교잡종의 건초 조제 기술 연구 (Hay Preparation Technology for Sorghum×Sudangrass Hybrid Using a Stationary Far-Infrared Dryer)

  • 김종근;김현래;이원진;유영상;이연분;왕리리
    • 한국초지조사료학회지
    • /
    • 제43권1호
    • /
    • pp.22-27
    • /
    • 2023
  • 본 시험은 원적외선을 이용한 수수×수단그라스 교잡종 인공건초의 조제 가능성을 확인하기 위해 수행되었다. 본 시험에 사용된 기계는 원적외선을 기본으로 하는 건조 장치로 온도, 송풍량, 원적외선 방사량 및 기류 속도를 조절할 수 있도록 설계되었다. 9월 하순에 수확한 수수×수단그라스 교잡종을 1일간 포장에서 예건을 하였고 이를 대상으로 실시 건조 시험을 수행하였다. 건조를 위한 조건은 전체 7개의 조건을 선택하여 수행하였으며 각각의 조건은 단일 조건(방사율 42%) 및 2단계(4처리) 및 3단계(2처리) 방사율 변화를 유도하였다. 기기내의 기류의 속도는 60m/s로 고정하였고 건조시간은 30, 60 및 90분으로 변화를 주었다. 평균 건물함량은 82.84%로 나타났으며 1번 및 3번 건조조건에서는 수분함량이 각각 59.94 및 76.91%로 나타나 건초에는 적합하지 않았다. 건조율에 있어서는 5번, 6번 및 7번 처리구에서 80% 이상으로 유의적으로 높게 나타났으며 전력 소비량은 평균 5.7kw/h로 다소 높게 나타났다. 각각의 건조 조건에 따른 사료가치는 조단백질 함량은 건조시간이 길어질수록 높게 나타났으며 ADF, NDF, IVDMD 및 TDN 함량에 있어서는 처리간에 유의적인 차이를 보이지 않았다. RFV에 있어서는 단일 조건인 1번 처리구가 복합조건보다 유의적으로 낮게 나타났다. 이상의 결과를 통하여 건조속도, 전력량, 품질 등을 고려할 때 4번 및 5번 건조조건이 가장 유리한 것으로 판단되었다.

디자인의 형태와 기능에 관한 연구 (Essay on Form and Function Design)

  • 이재국
    • 디자인학연구
    • /
    • 제2권1호
    • /
    • pp.63-97
    • /
    • 1989
  • There is nothing more important than the form and function in design, because every design product can be done on the basis of them. Form and Function are already existed before the word of design has been appeared and all the natural and man-made things' basic organization is based on their organic relations. The organic relations is the source of vitality which identifies the subsistance of all the objects and the evolution of living creatures has been changed their appearances by the natural law and order. Design is no exception. Design is a man-made organic thing which is developed its own way according to the purposed aim and given situations. If so, what is the ultimate goal of design. It is without saying that the goal is to make every effort to contribute to the -human beings most desirable life by the designer who is devoting himself to their convenience and well-being. Therefore, the designer can be called the man of rich life practitioner. This word implies a lot of meanings since the essence of design is improving the guality of life by the man-made things which are created by the designer. Also, the things are existed through the relations between form and function, and the things can keep their value when they are answered to the right purpose. In design, thus, it is to be a main concern how to create valuable things and to use them in the right way, and the subject of study is focused on the designer's outlook of value and uk relations between form and function. Christopher Alexander mentioned the importance of form as follows. The ultimate object of design is form. Every design problem begins with an effort to achieve fittness between the form and its context. The form is the solution to the problem: the context defmes the problem. In other words, when we speak of design, the real object of discussion is not form alone, but the ensemble comprising the form and its context. Good fit is a desirable property of this ensemble which relates to some particular division of the ensemble into form and context. Max Bill mainatined how important form is in design. Form represents a self-contained concept, and its embodiment in an object results in that object becoming a work of art. Futhermore, this explains why we use form so freguently in a comparative sense for determining whether one thing is less or more beautiful than another, and why the ideal of absolute beauty is always the standard by which we appraise form, and through form, art itself. Hence form has became synonymous with beauty. On the other hand, Laszlo Moholy-Nagy stated the importance of function as follows. Function means the task an object is designed to fulfill the task instrument is shaping the form. Unfortunately, this principle was not appreciated at the same time but through the endeavors of Frank Lloyd Wright and of the Bauhaus group and its many collegues in Europe, the idea of functionalism became the keynote of the twenites. Functionalism soon became a cheap slogan, however, and its original meaning blurred. It is neccessary to reexamine it in the light of present circumstances. Charles William Eliot expressed his idea on the relations between function and beauty. Beauty often results chiefly from fittness: indeed it is easy to manitain that nothing is fair except what is fit its uses or functions. If the function of the product of a machine be useful and valuable, an the machine be eminently fit for its function, it conspicuously has the beauty of fittness. A locomotive or a steamship has the same sort of beauty, derived from the supreme fittness for its function. As functions vary, so will those beauty..vary. However, it is impossible to study form and function in separate beings. Function can't be existed without form, and without function, form is nothing. In other words, form is a function's container, and function is content in form. It can be said that, therefore, the form and function are indispensable and commensal individuals which have coetemal relations. From the different point of view, sometimes, one is more emphasized than the other, but in this case, the logic is only accepted on the assumption of recognizing the importance of the other's entity. The fact can be proved what Frank Hoyd wright said that form and function are one. In spite of that, the form and function should be considered as independent indivisuals, because they are too important to be treated just as the simple single one. Form and function have flexible properties to the context. In other words, the context plays a role as the barometer to define the form and function, also which implies every meaning of surroun'||'&'||'not;dings. Thus, design is formed under the influence of situations. Situations are dynamic, like the design process itself, in which fixed focus can be cripping. Moreover, situations control over making the good design. Judging from the respect, I defined the good design in my thesis An Analytic Research on Desigh Ethic, "good design is to solve the problem by the most proper way in the situations." Situations are changeable, and so is design. There is no progress without change, but change is not neccessarily progress. It is highly desirable that there changes be beneficial to mankind. Our main problem is to be able to discriminate between that which should be discarded and that which should be kept, built upon, and improved. Form and Function are no exception. The practical function gives birth to the inevitable form and the $$\mu$ti-classified function is delivered to the varieties of form. All of these are depended upon changeable situations. That is precisely the situations of "situation de'||'&'||'not;sign", the concept of moving from the design of things to the design of the circumstances in which things are used. From this point of view, the core of form and function is depended upon how the designer can manage it efficiently in given situations. That is to say that the creativity designer plays an important role to fulfill the purpose. Generally speaking, creativity is the organization of a concept in response to a human need-a solution that is both satisfying and innovative. In order to meet human needs, creative design activities require a special intuitive insight which is set into motion by purposeful imagination. Therefore, creativity is the most essential quality of every designer. In addition, designers share with other creative people a compulsive ingenuity and a passion for imaginative solutions which will meet their criteria for excellence. Ultimately, it is said that the form and function is the matter which belongs to the desire of creative designers who constantly try to bring new thing into being to create new things. In accordance with that the main puppose of this thesis is to catch every meaning of the form and function and to close analyze their relations for the promotion of understanding and devising practical application to gradual progression in design. The thesis is composed of four parts: Introduction, Form, Function and Conclusion. Introduction, the purpose and background of the research are presented. In Chapter I, orgin of form, perception of form, and classification of form are studied. In Chapter II, generation of function, development of function, and diversification of function are considered. Conclusion, some concluding words are mentioned.ioned.

  • PDF

감정예측모형의 성과개선을 위한 Support Vector Regression 응용 (Application of Support Vector Regression for Improving the Performance of the Emotion Prediction Model)

  • 김성진;유은정;정민규;김재경;안현철
    • 지능정보연구
    • /
    • 제18권3호
    • /
    • pp.185-202
    • /
    • 2012
  • 오늘날 정보사회에서는 정보에 대한 가치를 인식하고, 이를 위한 정보의 활용과 수집이 중요해지고 있다. 얼굴 표정은 그림 하나가 수천개의 단어를 표현할 수 있듯이 수천 개의 정보를 지니고 있다. 이에 주목하여 최근 얼굴 표정을 통해 사람의 감정을 판단하여 지능형 서비스를 제공하기 위한 시도가 MIT Media Lab을 필두로 활발하게 이루어지고 있다. 전통적으로 기존 연구에서는 인공신경망, 중회귀분석 등의 기법을 통해 사람의 감정을 판단하는 연구가 이루어져 왔다. 하지만 중회귀모형은 예측 정확도가 떨어지고, 인공신경망은 성능은 뛰어나지만 기법 자체가 지닌 과적합화 문제로 인해 한계를 지닌다. 본 연구는 사람들의 자극에 대한 반응으로서 나타나는 얼굴 표정을 통해 감정을 추론해내는 지능형 모형을 개발하는 것을 목표로 한다. 기존 얼굴 표정을 통한 지능형 감정판단모형을 개선하기 위하여, Support Vector Regression(이하 SVR) 기법을 적용하는 새로운 모형을 제시한다. SVR은 기존 Support Vector Machine이 가진 뛰어난 예측 능력을 바탕으로, 회귀문제 영역을 해결하기 위해 확장된 것이다. 본 연구의 제안 모형의 목적은 사람의 얼굴 표정으로부터 쾌/불쾌 수준 그리고 몰입도를 판단할 수 있도록 설계되는 것이다. 모형 구축을 위해 사람들에게 적절한 자극영상을 제공했을 때 나타나는 얼굴 반응들을 수집했고, 이를 기반으로 얼굴 특징점을 도출 및 보정하였다. 이후 전처리 과정을 통해 통계적 유의변수를 추출 후 학습용과 검증용 데이터로 구분하여 SVR 모형을 통해 학습시키고, 평가되도록 하였다. 다수의 일반인들을 대상으로 수집된 실제 데이터셋을 기반으로 제안모형을 적용해 본 결과, 매우 우수한 예측 정확도를 보임을 확인할 수 있었다. 아울러, 중회귀분석이나 인공신경망 기법과 비교했을 때에도 본 연구에서 제안한 SVR 모형이 쾌/불쾌 수준 및 몰입도 모두에서 더 우수한 예측성과를 보임을 확인할 수 있었다. 이는 얼굴 표정에 기반한 감정판단모형으로서 SVR이 상당히 효과적인 수단이 될 수 있다는 점을 알 수 있었다.