• The Journal of the Acoustical Society of Korea
• /
• v.13 no.2
• /
• pp.38-49
• /
• 1994

This paper proposes Echo canceller used in simultaneous two-way ('full-duplex') transmission of data signals over two-wire circuits which can be achieved by using a hybrid coupler. This Echo canceller uses sequential processing instead of parallel processing with conventional adaptive digital filter. This structure reduces the number of multipliers. Thus, this structure is much more suitable for IC implementation. This Echo canceller operates according to the 'Stochastic Iteration Algorithm(SIA).' SIA algorithm has merit of good performance and small hardware requirement.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2003.06a
• /
• pp.209-212
• /
• 2003

In this paper, we have analyzed a multiwavelet filter bank architecture which have several bases. The filter bank composed of multiwavelets bases is matrix-valued. Multiwavelets offer simultaneous orthogonality, symmetry, and short support, which is not possible for the scalar wavelet system, hence multiwavelet system can obtain excellent performance in signal analysis and compress. Also the multiwavelet differs from the scalar wavelet system in requiring two or more input streams to the multiwavelet filter bank. In this paper, we describe methods for obtaining such a input stream and how apply the actual data.

• Proceedings of the KAIS Fall Conference
• /
• 2010.05a
• /
• pp.108-112
• /
• 2010

Confocal Imaging System is an essential machine for a wide range of inspection wafer. For concurrent and fast acquiring the image data of four channels, the new image acquisition system used the protocol of camera-link standard with the full mode of configuration in interconnection with a frame grabber integrated in a computer, which is popularly used for many cameras, so the programming environment of image processing is optional such as Visual C++, Matlab. In addition, many conventional methods were coordinately used for contribution to build the high quality of images for precise processing analog signals of PhotoMutiplier Tubes(PMTs), accurate control of scanning device, sensitivity of PMTs, and laser source. The prototype of new image acquisition system, could meet the goal of development, it is used in LSCM for high content screening to investigation the processes of elements of living specimens at the same time by simultaneous grab image data on 4 PMTs channels.

• Journal of Sensor Science and Technology
• /
• v.32 no.2
• /
• pp.118-123
• /
• 2023

This study presents sensor system for autonomous mobile robot capable of floor-to-floor self-navigation. The robot was modified using the Turtlebot3 hardware platform and ROS2 (robot operating system 2). The robot utilized the Navigation2 package to estimate and calibrate the moving path acquiring a map with SLAM (simultaneous localization and mapping). For elevator boarding, ultrasonic sensor data and threshold distance are compared to determine whether the elevator door is open. The current floor information of the elevator is determined using image processing results of the ceiling-fixed camera capturing the elevator LCD (liquid crystal display)/LED (light emitting diode). To realize seamless communication at any spot in the building, the LoRa (long-range) communication module was installed on the self-navigating autonomous mobile robot to support the robot in deciding if the elevator door is open, when to get off the elevator, and how to reach at the destination.

• ETRI Journal
• /
• v.45 no.3
• /
• pp.462-478
• /
• 2023

In quantum computing, the use of Pauli frames through software traces of classical computers improves computation efficiency. In previous studies, error correction and Pauli operation tracking have been performed simultaneously using integrated Pauli frames in the physical layer. In such a complex processing structure, the number of simultaneous operations processed in the physical layer exponentially increases as the distance of the surface code encoding logical qubit increases. This study proposes a Pauli frame management architecture partitioned into two layers for a lattice surgery-based surface code and describes its structure and operation rules. To evaluate the effectiveness of our method, we generated a random circuit according to the gate ratios constituting the commonly known quantum circuits and compared the generated circuit with the existing Pauli frame and our method. Simulations show a decrease of about 5% over traditional methods. In the case of experiments that only increase the code distance of the logical qubit, it can be seen that the effect of reducing the physical operation through the logical Pauli frame becomes more important.

• Transactions of Materials Processing
• /
• v.32 no.4
• /
• pp.221-227
• /
• 2023

While tube bending is a conventional forming technique, it is still used to make curved products for load-bearing members or aesthetically pleasing parts in various manufacturing industries such as automotive, aerospace, and others. Whole or local deformation of the final product such as springback, distortion, or local buckling are of interest in metal forming or precision manufacturing. In this paper, the factors affecting the cross-sectional deformation are explored. A 5-axis stretch bending machine was used for two-dimensional bending with extruded AA6082-T4 rectangular tubes. Three different bending sequences were employed: stretch before bending, stretch after bending, simultaneous bending and stretch. Furthermore, by considering both the stretch and bending angle, cross-sectional deformation was also analyzed. It was observed that employing stretch bending techniques can effectively reduce cross-sectional deformation and contribute to overall quality enhancement. Through this study, it was revealed that these factors have an impact on the cross-sectional deformation of the tubes.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.49 no.3
• /
• pp.8-14
• /
• 2012

Improving the speed of image processing is in great demand according to spread of high quality visual media or massive image applications such as 3D TV or movies, AR(Augmented reality). SIMD computer attached to a host computer can accelerate various image processing and massive data operations. MAMS is a multi-access memory system which is, along with multiple processing elements(PEs), adequate for establishing a high performance pipelined SIMD machine. MAMS supports simultaneous access to pq data elements within a horizontal, a vertical, or a block subarray with a constant interval in an arbitrary position in an $M{\times}N$ array of data elements, where the number of memory modules(MMs), m, is a prime number greater than pq. MAMS-PP4 is the first realization of the MAMS architecture, which consists of four PEs in a single chip and five MMs. This paper presents implementation of image processing algorithms and performance analysis for MAMS-PP16 which consists of 16 PEs with 17 MMs in an extension or the prior work, MAMS-PP4. The newly designed MAMS-PP16 has a 64 bit instruction format and application specific instruction set. The author develops a simulator of the MAMS-PP16 system, which implemented algorithms can be executed on. Performance analysis has done with this simulator executing implemented algorithms of processing images. The result of performance analysis verifies consistent response of MAMS-PP16 through the pyramid operation in image processing algorithms comparing with a Pentium-based serial processor. Executing the pyramid operation in MAMS-PP16 results in consistent response of processing time while randomly response time in a serial processor.

• Applied Chemistry for Engineering
• /
• v.7 no.5
• /
• pp.938-945
• /
• 1996

The present studies are to describe the grafting reaction of styrene in various solvents to polypropylene fabric by the simultaneous method using Co-60. The influence of various factors such as absorbed dose, dose rate, type of solvent, acid and multifunctional monomer were evaluated. At constant absorbed dose, the grafting yield was found to be higher at low dose rate. The initial rate of grafting was found to be proportional to a 0.56 power of dose rate. The inclusion of mineral acid in the grafting solution led to an increase in radiation grafting yield at almost all monomer concentration examined. Multifunctional monomer was also effective to increase grafting yield. The addition of both acid and multifunctional monomer was found to accelerate the grafting yield much more than the separate addition of two additives.

• Journal of Broadcast Engineering
• /
• v.14 no.2
• /
• pp.253-264
• /
• 2009

This paper presents an algorithm, aims at practical applications, for the high speed processing and performance enhancement of lane detection base on vision processing system. As a preprocessing for high speed lane detection, the vanishing line estimation and the optimal extraction of region of interest for lane boundary (ROI-LB) can be processed to reduction of detection region in which high speed processing is enabled. Image feature information is extracted only in the ROI-LB. Road lane is extracted using a non-parametric model fitting and Hough transform within the ROI-LB. With simultaneous processing of noise reduction and edge enhancement using the Laplacian filter, the reliability of feature extraction can be increased for various road lane patterns. Since outliers of edge at each block can be removed with clustering of edge orientation for each block within the ROI-LB, the performance of lane detection can be greatly improved. The various real road experimental results are presented to evaluate the effectiveness of the proposed method.

• Journal of the Korea Society of Computer and Information
• /
• v.8 no.2
• /
• pp.112-121
• /
• 2003

Information Protection and cryptography technology is developed with if but solved problem of real time processing and secret maintain. Therefore this paper is Proposed new PRN-SEED(Pseudo-Random Number-SEED) for the increasing secret rate and processing rate perform performance analysis with existed other cryptography algorithms. Proposed new PRN-SEED crypto-algorithm increase in the processing rate than existed algorithms use bit and byte mixed operation with RNG(Random Number Generator). PRN-SEED that performs simultaneous operations have higher 1.03 in the processing rate and 2 in the cryptosystem performance than existed cryptosystems. Implementation for PRN-SEED use Synopsys Design Analyser Ver. 1999.10, samsung KG75 library and Synopsys VHDL Debegger. As a simulation result, symmetric cryptosystem DES operate 416Mbps at the 40MHz and Rijndael operate 612Mbps at the 50MHz. PRN-SEED cryptosystem have gate counting 10K and operate 430Mbps at the 40MHz and 630Mbps at the 50MHz.