• Journal of the Korean Society for Railway
• /
• v.5 no.2
• /
• pp.55-60
• /
• 2002

This study proposes the post-processor simulator construction of ultrasonic signal for integrity evaluation of railway truck. For these purposes, the ultrasonic signals for defects(crack) of weld zone in frames are acquired in the type of time series data and echo strength. The detection of the natural defects in railway truck is performed using the characteristics of echodynamic pattern in ultrasonic signal. The constructed post-processor simulator agree fairly well with the measured results of test block(defect location, beam propagation distance, echo strength, etc). Proposed post-processor simulator construction of ultrasonic in this study can be used for the integrity evaluation of railway truck.

• International Journal of Safety
• /
• v.9 no.2
• /
• pp.1-5
• /
• 2010

In order to analyze the potential rise of ground surface of grounding grid installed in buildings, the grounding simulator has been designed and fabricated as substantial and economical measures. This paper describes the study of touch and step voltages with grounding grid where earth leakage current is injected. To assess risk voltage of grounding grid, the grounding simulator and CDEGS program were used to obtain measured data and theoretical results of this study. The grounding simulator was composed of an electrolytic tank, AC power supply, a movable potentiometer, and test grounding electrodes. The potential rise was measured by grounding simulator, and the touch and step voltages were computed by CDEGS program. As a consequence, the touch voltage and step voltage above the grounding grid were very low, but were significantly increased near the edge of grounding grid.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.7
• /
• pp.708-712
• /
• 2004

Shallow $p^+-n$ junctions were formed by ion implantation and dual-step annealing processes. The dopant implantation was performed into the crystalline substrates using BF$_2$ ions. The annealing was performed with a rapid thermal processor and a furnace. FA+RTA annealing sequence exhibited better junction characteristics than RTA+FA thermal cycle from the viewpoint of junction depth and sheet resistance. A new simulator is designed to model boron diffusion in silicon. The model which is used in this simulator takes into account nonequilibrium diffusion, reactions of point defects, and defect-dopant pairs considering their charge states, and the dopant inactivation by introducing a boron clustering reaction. Using initial conditions and boundary conditions, coupled diffusion equations are solved successfully. The simulator reproduced experimental data successfully.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.06b
• /
• pp.61-66
• /
• 2006

This paper proposes a method for generating radar images used in ship handling simulator, which includes mathematical logics based on radar equations and information from Openflight format files. In order to make radar image much similar to that of real radar in PPI type, the proposed mathematical logic derives radar video signals under the consideration of riot only the data form flight format file of simulation scenes, but also geographical radar's position. The proposed method is considered useful to make radar images in ship handling simulator with accuracy and reality.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.1 s.232
• /
• pp.96-106
• /
• 2005

An integrated single-wafer processing tool, composed of multiple single wafer processing modules, transfer robots, and load locks, has complex routing sequences, and often has critical post-processing residency constraints. Scheduling of these tools is an intricate problem, and testing schedulers with actual tools requires too much time and cost. The Single Wafer Processor (SWP) simulator presented in this paper is to validate an on-line scheduler, and evaluate performance of integrated single-wafer processing tools before the scheduler is actually deployed into real systems. The data transfer between the scheduler and the simulator is carried out with TCP/IP communication using messages and files. The developed simulator consists of six modules, i.e., GUI (Graphic User Interface), emulators, execution system, module managers, analyzer, and 3D animator. The overall framework is built using Microsoft Visual C++, and the animator is embodied using OpenGL API (Application Programming Interface).

• Proceedings of the KIPE Conference
• /
• 2010.11a
• /
• pp.248-249
• /
• 2010

This paper describes development of hardware simulator for the PMSG(Permanent Magnet Synchronous Generator) wind power system, which was designed using real wind data. The simulator consists of a realistic wind turbine model using anemometer, vector drive, induction motor. The turbine simulator generates torque and speed signals for a specific wind turbine with respect to given wind speed. This torque and speed signals are scaled down to fit the input of 3kW PMSG. The PMSG-side converter operates to track the maximum power point and the grid-side inverter controls the active and reactive power supplied to the grid. The operational feasibility was first verified by computer simulations with PSCAD/EMTDC. The feasibility of real system implementation was confirmed through experimental works with a hardware set-up.

• Journal of Positioning, Navigation, and Timing
• /
• v.10 no.4
• /
• pp.341-351
• /
• 2021

In this paper, a GNSS error generation simulator for Signal Quality Monitoring (SQM) is implemented by using Matlab based on mathematical models derived from the effect of GNSS signal and measurement errors. The GNSS signal measurement errors of interest in this paper include three cases such as Evil Wave Form (EWF), Multipath (MP) and Radio Frequency Interference (RFI). In order to verify the validity of the generated measurement errors, a simple form of metrics for detecting and monitoring GNSS errors is included in the simulator. The GNSS errors generated by the simulator are added to the GNSS measurement data from commercial GNSS receiver in real time, and then, the SQM is tested for various scenarios of each case configured by scenario setting of the user.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.27 no.5
• /
• pp.567-580
• /
• 2024

Due to specificity in the underwater environment, the difficulty of detecting submarine and the threat of submarine are increasing. The probability of detecting a submarine can be increased by estimation submarine path and optimizing sonobuoy deployment. In this paper, marine data collection, dynamics of submarine, submarine tracking path modeling, acoustic wave propagation modeling, detection probability modeling are applied in the simulator as similar to reality as possible. A simulator is developed to design submarine path estimation and sonobuoy deployment optimization scenario and to check result according to the scenario.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.10
• /
• pp.119-128
• /
• 2003

The rapid increase of Internet users, diversity of application services, high speed data transmission, and extension of application areas have resulted in exponential growth of Internet traffic. In order to satisfy the increasing demand of bandwidth, the MPλS protocol, which is based on MPLS for efficient integration of WDM and IP protocols, has been suggested by IETF. In this paper, we present an MPλS simulator which enables to simulate various MPλS function such as optical crossconnect (OXC), multi-wavelength links, routing and wavelength assignment(RWA), and MPλS signaling and control. The simulator is developed based on the ns-2, an widely used multi-protocol network simulator. The function of the simulator is validated by running many simulation based on various scenarios and performance measures such as throughput and blocking probability. The simulator could be widely utilized for validation of proposed protocols before developing real optical network systems.

• Journal of Advanced Navigation Technology
• /
• v.18 no.1
• /
• pp.22-28
• /
• 2014

This paper presents the design and development of ECU simulator in order to verify automatic firmware update system of ECU SW on the vehicle. We designed and developed general-proposed ECU simulator as devide into HW and SW parts. HWadopt 32bit MPU, CAN, LIN, LCD, and touch-pad button to satisfy general-proposed ECU level. And SW constructed as finite-state-machine structure in order to support HW spec. We developed ECU manager which deliveries update data to verify validity of operation. And we tested ECU simulator with ECU manager. For test of validity of ECU simulator, we set 4 scenarios between ECU simulator and manager. As the result, we confirmed validity of operation in ECU simulator for automatic SW update system.