• Title/Summary/Keyword: Simulation game

Search Result 571, Processing Time 0.029 seconds

Smart Anti-jamming Mobile Communication for Cloud and Edge-Aided UAV Network

  • Li, Zhiwei;Lu, Yu;Wang, Zengguang;Qiao, Wenxin;Zhao, Donghao
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • v.14 no.12
    • /
    • pp.4682-4705
    • /
    • 2020
  • The Unmanned Aerial Vehicles (UAV) networks consisting of low-cost UAVs are very vulnerable to smart jammers that can choose their jamming policies based on the ongoing communication policies accordingly. In this article, we propose a novel cloud and edge-aided mobile communication scheme for low-cost UAV network against smart jamming. The challenge of this problem is to design a communication scheme that not only meets the requirements of defending against smart jamming attack, but also can be deployed on low-cost UAV platforms. In addition, related studies neglect the problem of decision-making algorithm failure caused by intermittent ground-to-air communication. In this scheme, we use the policy network deployed on the cloud and edge servers to generate an emergency policy tables, and regularly update the generated policy table to the UAVs to solve the decision-making problem when communications are interrupted. In the operation of this communication scheme, UAVs need to offload massive computing tasks to the cloud or the edge servers. In order to prevent these computing tasks from being offloaded to a single computing resource, we deployed a lightweight game algorithm to ensure that the three types of computing resources, namely local, edge and cloud, can maximize their effectiveness. The simulation results show that our communication scheme has only a small decrease in the SINR of UAVs network in the case of momentary communication interruption, and the SINR performance of our algorithm is higher than that of the original Q-learning algorithm.

Types of Virtual Reality-based Safety Education Contents (가상현실 기반 안전교육 콘텐츠 유형 연구)

  • Chang, Sun-Hee;Chang, Hyo-Jin;Kim, Sung-Hoon
    • The Journal of the Korea Contents Association
    • /
    • v.21 no.1
    • /
    • pp.434-445
    • /
    • 2021
  • With the development of realistic content technology and related infrastructure, interest in the use of virtual reality content is growing. Accordingly, in the field of safety education, more and more cases of producing virtual reality-based safety education (VR safety education) contents such as experiencing disaster situations realistically by supplementing the shortcomings of existing lecture-style education. This study looked at the characteristics and effects of VR safety education compared to the existing safety education, and analyzed 104 VR safety education contents produced and disclosed to date into nine classifications based on content and form. Based on the degree of relevance between items and the two axes of 'interactionability' and 'vividness of the environment', VR safety education contents could be categorized into three types: tangible lecture type, simulation type, and game type. Through this study, we hope to contribute to the planning and production of quality VR safety education contents by considering the purpose of safety education and the characteristics of types with the expected effects.

P2P Systems based on Cloud Computing for Scalability of MMOG (MMOG의 확장성을 위한 클라우드 컴퓨팅 기반의 P2P 시스템)

  • Kim, Jin-Hwan
    • The Journal of the Institute of Internet, Broadcasting and Communication
    • /
    • v.21 no.4
    • /
    • pp.1-8
    • /
    • 2021
  • In this paper, we propose an approach that combines the technological advantages of P2P and cloud computing to support MMOGs that allowing a huge amount of users worldwide to share a real-time virtual environment. The proposed P2P system based on cloud computing can provide a greater level of scalability because their more resources are added to the infrastructure even when the amount of users grows rapidly. This system also relieves a lot of computational power and network traffic, the load on the servers in the cloud by exploiting the capacity of the peers. In this paper, we describe the concept and basic architecture of cloud computing-based P2P Systems for scalability of MMOGs. An efficient and effective provisioning of resources and mapping of load are mandatory to realize this architecture that scales in economical cost and quality of service to large communities of users. Simulation results show that by controlling the amount of cloud and user-provided resource, the proposed P2P system can reduce the bandwidth at the server while utilizing their enough bandwidth when the number of simultaneous users keeps growing.

Dynamic Reconstruction Algorithm of 3D Volumetric Models (3D 볼류메트릭 모델의 동적 복원 알고리즘)

  • Park, Byung-Seo;Kim, Dong-Wook;Seo, Young-Ho
    • Journal of Broadcast Engineering
    • /
    • v.27 no.2
    • /
    • pp.207-215
    • /
    • 2022
  • The latest volumetric technology's high geometrical accuracy and realism ensure a high degree of correspondence between the real object and the captured 3D model. Nevertheless, since the 3D model obtained in this way constitutes a sequence as a completely independent 3D model between frames, the consistency of the model surface structure (geometry) is not guaranteed for every frame, and the density of vertices is very high. It can be seen that the interconnection node (Edge) becomes very complicated. 3D models created using this technology are inherently different from models created in movie or video game production pipelines and are not suitable for direct use in applications such as real-time rendering, animation and simulation, and compression. In contrast, our method achieves consistency in the quality of the volumetric 3D model sequence by linking re-meshing, which ensures high consistency of the 3D model surface structure between frames and the gradual deformation and texture transfer through correspondence and matching of non-rigid surfaces. And It maintains the consistency of volumetric 3D model sequence quality and provides post-processing automation.

Implementation of Joystick for Flight Simulator using WiFi Communication

  • Myeong-Chul Park;Sung-Ho Lee;Cha-Hun Park
    • Journal of the Korea Society of Computer and Information
    • /
    • v.28 no.8
    • /
    • pp.111-118
    • /
    • 2023
  • In this paper, we propose a WiFi-based joystick with an acceleration sensor and a vibration sensor that can be used in flight simulators and VR fields. The flight simulator is a technology belonging to the ICT and SW application field and provides a simulation environment that reproduces the aircraft environment. Existing flight simulator control devices are fixed to a specific device and the user's activity area is limited. In this paper, a 3D space manipulation device was implemented for the user's free use of space. In addition, the proposed control device is designed as a WiFi communication board and display that displays information and performs 3-axis sensing for accurate and sophisticated control compared to existing VR equipment controllers. And the applicability was confirmed by implementing a Unity-based virtual environment. As a result of the implementation device verification, it was confirmed that the control device operates normally through the communication interface, It was confirmed that the sensing values in the game and the sensing values measured on the implemented board matched each other. The results of this study can be used for VR and various metaverse related contents in addition to flight simulators.

A Study on Teaching-Learning and Evaluation Methods of Environmental Studies in the Middle School (중학교 "환경" 교과의 교수.학습 및 평가 방법 연구)

  • 남상준
    • Hwankyungkyoyuk
    • /
    • v.7 no.1
    • /
    • pp.1-17
    • /
    • 1994
  • This study was performed to determine appropriate teaching-learning and evaluation methods for Environmental Studies. To promote the relevance of our study to the needs of the schools and concerned educational communities of environmental education, we reviewed related literature, conducted questionnaire surveys, interviewed related teachers and administrator, held meetings with experts, and field-tested our findings. For selecting and developing teaching-learning methods of Environmental Studies, findings of educational research in general are considered. moreover, principles of environmental education, general aim of environmental education, orientations of environmental education, and developmental stages of middle school students in educational psychology were attended. In addition, relevance to the purpose of the Environmental Studies curriculum, appropriateness for value inquiry as well as knowledge inquiry, small group centered class organization, social interaction centered teaching-learning process, regional environmental situation, significance of personal environment, evaluation methods of Environmental Studies, multi- and inter-disciplinary contents of the Environmental Studies textbook, suitability to the evaluation methods of Environmental Studies, and emphasis on the social interaction in teaching-learning process were regarded. It was learned the Environmental Studies can be taught most effectively in via of holding discussion sessions, conducting actual investigation, doing experiment-practice, doing games and plate, role-playing and carrying out simulation activities, and doing inquiry. These teaching-learning methods were field-tested and proved appropriate methods for the subject. For selecting and developing evaluation method of Environmental Studies, such principles and characteristics of Environmental Studies as objective domains stated in the Environmental Studies curriculum, diversity of teaching-learning organization, were appreciated. We categorized nine evaluation methods: the teacher may conduct questionnaire surveys, testings, interviews, non-participatory observations; they may evaluate student's experiment-practice performances, reports preparation ability, ability to establish a research project, the teacher may ask the students to conduct a self-evaluation, or reciprocal evaluation. To maximize the effect of these methods, we further developed an application system. It considered three variables, that is, evaluates, evaluation objectives domains, and evaluation agent, and showed how to choose the most appropriate methods and, when necessary, how to combine uses of different methods depending on these variables. A sample evaluation instrument made on the basis of this application system was developed and tested in the classes. The system proved effective. Pilot applications of the teaching-learning methods and evaluation method were made simultaneously; and the results and their implications are as follows. Discussion program was applied in a lesson dealing with the problems of waste disposal, in which students showed active participation and creative thinking. The evaluation method used in this lesson was a multiple-choice written test for knowledge and skills. It was shown that this evaluation method and device are effective in helping students' revision of the lesson and in stimulating their creative interpretations and responces. Pupils showed great interests in the actual investigation program, and this programme was proved to be effective in enhancing students' participation. However, it was also turned out that there must be pre-arranged plans for the objects, contents and procedures of survey if this program is to effective. In this lesson, non-participatory observation methods were used with a focus on the attitudes of students. A scaled reported in general description rather than in grade. Experiment-practice programme was adopted in a lesson for purifying contaminated water and in this lesson, instruction objectives were properly established, the teaching-learning process was clearly specified and students were highly motivated. On the other hand, however, it was difficult to control the class when some groups of students require more times to complete their experiment, and sometimes different results. As regards to evaluation, performance observation test were used for assessing skills and attitudes. If teachers use well-prepared Likert scale, evaluation of all groups within a reasonablely short period of time will be possible. The most effective and successful programme in therms of students' participation and enjoyment, was the 'ah-nah-bah-dah-market' program, which is kind of game of the flea market. For better organized program of this kind, however, are essential, In this program, students appraise their own attitudes and behavior by responding to a written questionnaire. In addition, students were asked to record any anecdotes relating to self-appraisal of changes on one's own attitudes and behaviours. Even after the lesson, students keep recording those changes on letters to herself. Role-playing and simulation game programme was applied to a case of 'NIMBY', in which students should decide where to located a refuse dumping ground. For this kind of programme to e successful, concepts and words used in the script should be appropriate for students' intellectual levels, and students should by adequately introduced into the objective and the procedures of the lessons. Written questionnaire was used to assess individual students' attitudes after the lesson, but in order to acquire information on the changes of students' attitudes and skills, pre-test may have to be made. Doing inquiry programme, in which advantages in which students actually investigated the environmental influence of the areas where school os located, had advantages in developing students' ability to study the environmental problems and to present the results of their studies. For this programme to be more efficient, areas of investigation should be clearly divided and alloted to each group so that repetition or overlap in areas of study and presentation be avoided, and complementary wok between groups bee enhanced. In this programme, teacher assessed students' knowledge and attitudes on the basis of reports prepared by each group. However, there were found some difficults in assessing students' attitudes and behaviours solely on the grounds of written report. Perhaps, using a scaled checklist assessing students' attitudes while their presentation could help to relieve the difficulties.

  • PDF

Development of Simulator for Rockfall and Landslide using Physical Engine (물리엔진을 사용한 낙석 및 산사태 시뮬레이터 개발)

  • Kim, Sung-Ho
    • The Journal of the Korea Contents Association
    • /
    • v.9 no.9
    • /
    • pp.60-67
    • /
    • 2009
  • This paper describes a development of system that enables the user to simulate the rockfall and landslide from slopes using physical engine. Until now, it will not be able to accomplish the virtual experiment of three-dimensional interpretation about slope informations, stability evaluation, the rockfall and landslide simulation, etc., because of absence of three-dimensional simulation systems which relates with slopes. With like that reason, this paper developed a simulator which is identical or similar the rockfall and the landslide where the possibility which will occur or occurred from actuality is high very actual condition from virtual experiment. For a simulator development, this paper uses the physical engine which is mainly used from computer game and animation development etc., And it will be show the process where the rockfall and landslide occurs with simulator. This simulator which sees the process where the rockfall and the landslide occur from three-dimension computer graphics theory and the physical engine, is a system which is the possibility of showing actual feeling. Therefore, the result of this paper is applied in vehicle travelling guidance system and intelligence traffic systematic etc., because of creates visual service and three-dimensional application of the slope information database which is developed in existing, and will be able to forecast the upgrade of user benefit planning and a service.

A Study on the Methodology for Combat Experimental Testing of Future Infantry Units using Simulation (시뮬레이션을 활용한 미래 보병부대 전투실험)

  • Lim, Jong-Won;Choi, Bong-Wan;Yim, Dong-Soon
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.22 no.3
    • /
    • pp.429-438
    • /
    • 2021
  • Owing to the development of science technology, particularly the smart concept and defense policy factors of the 4th industry, military weapon systems are advanced, and the scientific and operational force is reduced dramatically. The aspect of the future war is characterized by the operation of troops with reduced forces from advanced and scientific weapon systems in an operational area that has expanded more than four times compared to the present. Reflecting on these situational factors, it is necessary to improve combat methods based on the changes in the battlefield environment and advanced weapon systems. In this study, to find a more efficient future combat method in a changing war pattern, this study applied the battle experiment methodology using Vision21 war game model, which is an analytical model used by the army. Finally, this study aimed to verify the future combat method and unit structure. Therefore, the scenario composition and experiment method that reflect the change in the ground operational environment and weapon system was first composed. Subsequently, an analysis method based on the combat effectiveness was applied to verify the effective combat performance method and unit structure of future infantry units.

A Study on Metaverse Construction Based on 3D Spatial Information of Convergence Sensors using Unreal Engine 5 (언리얼 엔진 5를 활용한 융복합센서의 3D 공간정보기반 메타버스 구축 연구)

  • Oh, Seong-Jong;Kim, Dal-Joo;Lee, Yong-Chang
    • Journal of Cadastre & Land InformatiX
    • /
    • v.52 no.2
    • /
    • pp.171-187
    • /
    • 2022
  • Recently, the demand and development for non-face-to-face services are rapidly progressing due to the pandemic caused by the COVID-19, and attention is focused on the metaverse at the center. Entering the era of the 4th industrial revolution, Metaverse, which means a world beyond virtual and reality, combines various sensing technologies and 3D reconstruction technologies to provide various information and services to users easily and quickly. In particular, due to the miniaturization and economic increase of convergence sensors such as unmanned aerial vehicle(UAV) capable of high-resolution imaging and high-precision LiDAR(Light Detection and Ranging) sensors, research on digital-Twin is actively underway to create and simulate real-life twins. In addition, Game engines in the field of computer graphics are developing into metaverse engines by expanding strong 3D graphics reconstuction and simulation based on dynamic operations. This study constructed a mirror-world type metaverse that reflects real-world coordinate-based reality using Unreal Engine 5, a recently announced metaverse engine, with accurate 3D spatial information data of convergence sensors based on unmanned aerial system(UAS) and LiDAR. and then, spatial information contents and simulations for users were produced based on various public data to verify the accuracy of reconstruction, and through this, it was possible to confirm the construction of a more realistic and highly utilizable metaverse. In addition, when constructing a metaverse that users can intuitively and easily access through the unreal engine, various contents utilization and effectiveness could be confirmed through coordinate-based 3D spatial information with high reproducibility.

Estimating Carbon Sequestration by Planting a Leisure-Recreation Place in Gangwon Province, Korea (레저휴양공간의 수목 추가식재가 탄소흡수기능 향상에 미치는 효과)

  • Hong, Suk-Hwan;Sung, Chan-Yong;Yoo, Ki-Joon;Cho, Woo
    • Korean Journal of Environment and Ecology
    • /
    • v.26 no.3
    • /
    • pp.446-453
    • /
    • 2012
  • This study estimated how much carbon can be sequestered if we plant trees in non-forested areas in the 36 hole Oak Valley Golf Courses in Gangwon Province, Korea. We identified plantable areas where planting trees will not affect golf game using high resolution aerial photography and ground survey and estimated the annual carbon sequestration rate of the planted trees using biomass equations. Of the golf courses, 30.3% were covered by forest. Other major land cover types include lawn, waterbody, baresoil, buildings, and roads. The plantable areas consist of $106,101m^2$ of lawn (6.0% of the study site) and $177,531m^2$ of low density forest (10.1% of the study site). We assumed to plant Mongolian oaks with 10 cm in diameter at brest height with the density of $0.3/m^2$ in the lawn and $0.2/m^2$ in the low density forest. The planting simulation shows that the total number of the newly planted trees were 67,336, and the total carbon sequestered during the subsequent year was 392.9 tC/yr, which offset 12.5% of the total carbon emitted from the golf courses. The annual carbon sequestration rate gradually increases and reaches its maximum level at 440.5 tC/yr in 15 years since the initial reforestation (14.0% of the carbon emission from the golf courses).