• 한국지진공학회논문집
• /
• 제22권4호
• /
• pp.253-259
• /
• 2018

Structure behaviors resulting from an earthquake are experimentally simulated mainly through a shaking table test. As for large-scale structures, however, size effects over a miniature may make it difficult to assess actual behaviors properly. To address this problem, research on the hybrid simulation is being conducted actively. This method is to implement numerical analysis on framework members that affect the general behavior of the structure dominantly through an actual scale experiment and on the rest parts by applying the substructuring technique. However, existing studies on hybrid simulation focus mainly on Slow experimental methods, which are disadvantageous in that it is unable to assess behaviors close to the actual level if material properties change depending on the speed or the influence of inertial force is significant. The present study aims to establish a Real-time hybrid simulation system capable of excitation based on the actual time history and to verify its performance and applicability. The hybrid simulation system built up in this study utilizes the ATS Compensator system, CR integrator, etc. in order to make the target displacement the same with the measured displacement on the basis of MATLAB/Simulink. The target structure was a 2-span bridge and an RC pier to support it was produced as an experimental model in order for the shaking table test and Slow and Real-time hybrid simulations. Behaviors that result from the earthquake of El Centro were examined, and the results were analyzed comparatively. In comparison with the results of the shaking table test, the Real-time hybrid simulation produced more similar maximum displacement and vibration behaviors than the Slow hybrid simulation. Hence, it is thought that the Real-time hybrid simulation proposed in this study can be utilized usefully in seismic capacity assessment of structural systems such as RC pier that are highly non-linear and time-dependent.

• 제어로봇시스템학회논문지
• /
• 제14권12호
• /
• pp.1244-1252
• /
• 2008

This paper presents the analysis results obtained by the flight test of reconfiguration flight control system for an aircraft. The reconfiguration flight control system was designed by using control allocation scheme that automatically distributes the demanded control moments determined by control law to each actual control surface. In this paper, some control allocation algorithms for reconfiguration control of general aircraft with redundant control surfaces are summarized and their performance evaluation results through nonlinear simulation and Hardware-In-the-Loop-Simulation (HILS) test are shown. Also, Unmanned Aerial Vehicle (UAV) system adopted as a platform for the flight test of reconfiguration flight controller and the implementation procedure of reconfiguration flight controller into real-time UAV system were introduced. Finally, flight test results were analyzed.

• 대한기계학회논문집 C: 기술과 교육
• /
• 제5권2호
• /
• pp.81-87
• /
• 2017

315Fr 컴프레서용 모터가 진동 기준을 초과하는 문제가 발생하였고 이를 해결하기 위한 FEM해석과 모드실험을 수행하였다. 먼저 자유단 조건하의 해석과 실험을 수행하여 해석을 위한 조건을 확인하였다. 해석을 위한 Mesh, 재질, 경계 조건을 검토하였다. 여기서 얻은 결과를 바탕으로 볼트가 고정된 상태의 FEM 해석과 모드 실험을 수행하여 진동의 원인을 확인하였다. 모드실험 결과 121.7Hz에 Rolling 모드가 있음을 확인하였고 해석을 통해서도 동일한 결과를 얻을 수 있었다. 이 결과를 바탕으로 진동 기준을 초과하는 원인은 120Hz에 존재하는 Rolling 운동과 2X, 2fl 가진 주파수의 공진에 의한 것임을 알게 되었다. 여기서 얻은 결과를 바탕으로 추후 시리즈 설계에 있어서는 시험 모델 제작이나 실험 없이 해석만으로 문제점을 예측하고 해결할 수 있는 기술을 보유하게 되었다.

• 대한조선학회논문집
• /
• 제46권6호
• /
• pp.553-561
• /
• 2009

This paper presents the results of prediction of maneuverability of KCS by CPMC captive model test. The CPMC(Computerized Planar Motion Carriage) with captive model test equipment is installed at Ocean Engineering Tank of MOERI. KCS is the container ship which was open to the world by MOERI. And the test results for the prediction of maneuverability were presented by NMRI in Japan. The research results about the maneuverability of KCS were presented at SIMMAN 2008 Workshop in Denmark. The results of test and simulation of this paper are compared with the results of simulation by MOERI using test results of NMRI and simulation results by NMRI.

• ETRI Journal
• /
• 제39권4호
• /
• pp.605-613
• /
• 2017

Simulated fault injection (SFI) is widely used to assess the effectiveness of fault tolerance mechanisms in safety-critical embedded systems (SCESs) because of its advantages such as controllability and observability. However, the long test time of SFI due to the large number of test cases and the complex simulation models of modern SCESs has been identified as a limiting factor. We present a method that can accelerate an SFI tool using a checkpoint forwarding (CF) technique. To evaluate the performance of CF-based SFI (CF-SFI), we have developed a CF mechanism using Verilog fault-injection tools and two systems under test (SUT): a single-core-based co-simulation model and a triple modular redundant co-simulation model. Both systems use the Verilog simulation model of the OpenRISC 1200 processor and can execute the embedded benchmarks from MiBench. We investigate the effectiveness of the CF mechanism and evaluate the two SUTs by measuring the test time as well as the failure rates. Compared to the SFI with no CF mechanism, the proposed CF-SFI approach reduces the test time of the two SUTs by 29%-45%.

• Nuclear Engineering and Technology
• /
• 제53권3호
• /
• pp.793-803
• /
• 2021

The small PWR has been paid more and more attention due to its diversity of application and flexibility in the site selection. However, the large core power density, the small containment space and the rapid accident progress characteristics make it difficult to control the containment pressure like the traditional PWR during the LOCA. The pressure suppression system has been used by the BWR since the early design, which is a suitable technique that can be applied to the small PWR. Since the configuration and operating conditions are different from the BWR, the pressure suppression system should be redesigned for the small PWR. Conducting the experiments on the scale down test facility is a good choice to reproduce the prototypical phenomena in the test facility, which is both economical and reasonable. A systematic scaling method referring to the H2TS method was proposed to determine the geometrical and thermohydraulic parameters of the pressure suppression containment response test facility for the small PWR conceptual design. The containment and the pressure suppression system related thermohydraulic phenomena were analyzed with top-down and bottom-up scaling methods. A set of the scaling criteria were obtained, through which the main parameters of the test facility can be determined.

• 한국데이터정보과학회:학술대회논문집
• /
• 한국데이터정보과학회 2005년도 춘계학술대회
• /
• pp.182-184
• /
• 2005

In this study, we propose a chi-squared test of spherical symmetry. The advantage of this test is that the test statistic and its asymptotic p-value are easy to compute. A simulation study is conducted to study the accuracy, in finite samples, of the limiting distribution of the test statistic under spherical symmetry. The power of our test is compared with those of other tests for spherical symmetry in various alternative distributions via simulation.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.189-189
• /
• 2000

A controller test on a sounding rocket using a testbed is discussed in the paper. Because of the high cost and the risk for the flight test the hardware simulation on the ground is performed. In this paper the conventional On/Off Controller is applied to the attitude control of a sounding rocket. The hardware simulation results are compared with those of the software simulation.

• 상하수도학회지
• /
• 제22권1호
• /
• pp.49-63
• /
• 2008

The objectives of this research were to evaluate the pressurized/the main inlet water flowrate ratio which have been used as the most important parameter for operating the pump diffusion mixer until now, to suggest the alternative operating parameter and the relating criteria if the flowrate ratio was not inadequate. For the objectives of this research, computational fluid dynamics (CFD) simulation was conducted for 21 cases of flowrate ratio in full-scaled pump diffusion mixer. From the results of CFD simulation, the local velocity gradient values were calculated in each case in order to analyze the simulation results in more detail. For verifying CFD simulation, wet test was conducted. The wet test was to measure the factual coagulant dispersion distribution at a distance of 5.4m from deflector. From both results of CFD simulation and wet test, flowrate ratio was inadequate as operating parameter or criteria, on the other hand the pressurized/the main inlet velocity ratio(dimensionless) was useful in predicting the performance of pump diffusion mixer. Also, the injected coagulant could be dispersed evenly in overall cross section on the condition that pressurized/the main inlet velocity ratio(dimensionless) is over at least 20.

• 한국응급구조학회지
• /
• 제18권3호
• /
• pp.91-104
• /
• 2014

Purpose: This study aimed to confirm the effects of a simulation-based program on knowledge and clinical performance in the post-operative management of emergency patients. Methods: This was a pre- and post-research design with a nonequivalent control group and randomly sampled 29 experimental and control groups, respectively from nursing department juniors for 4 weeks from September of 2014. The experimental group received lectures, team study, team simulation, and debriefing in post-operative management of simulation-based emergency patients and control group conducted in the traditional lecture-type setting. Educational learning effects were measured by using the knowledge and clinical performance measurement tools of 15 and 20 items, respectively. Data were analyzed by using the SPSS program, including frequency, ratio, and results from the Chi-square test, Fisher's exact test, Kolmogorov-Smirnov test, t-test. Results: Our research results indicate that, the experimental group showed significantly higher knowledge and clinical performance score compared with the control group. Conclusion: We confirmed that education on post-operative management of simulation-based emergency patients was an effective educational method to improve the knowledge and clinical performance of nursing students.