• 제어로봇시스템학회논문지
• /
• 제2권3호
• /
• pp.209-219
• /
• 1996

Fieldbus provides a real-time data communication among field devices in the process control and manufacturing automation systems. In this paper, a Petri Net model of the 1993 draft of IEC/ISA fieldbus which is proposed as an international standard of fieldbus network is developed. Based on the Petri Net model, discrete-event simulation model of IEC/ISA fieldbus network is developed. This paper evaluates the network induced delay in the data link layer of IEC/ISA fieldbus using the simulation model. In addition, an integrated discrete-event/continuous-time simulation model of fieldbus system and distributed control system is developed. This paper investigates the real-time data processing capability of IEC/ISA fieldbus and the effect of network-induced delay to the performance of control system.

• 한국시뮬레이션학회논문지
• /
• 제6권1호
• /
• pp.109-122
• /
• 1997

The Off-Dock Container Yard (ODCY)s in Pusan are located at 48 different places, and it causes serious problems in the container cargo transport and inland traffic near Pusan district. Hence, the analysis and evaluation of ODCY operation is important. Therefore, this paper proposes a simulation model which evaluates the operation of ODCY. It also proposes a simulation model using an object-oriented approach which includes the system is modeled with object-class hierarchy and SIMPLE++, an object-oriented simulation software, is used to develop the model.

• 한국시뮬레이션학회논문지
• /
• 제27권2호
• /
• pp.11-24
• /
• 2018

본 연구는 한국형 유압드릴에 적합한 고출력 드리프터 개발을 위해 해석모델 개발 및 설계변수 민감도 분석을 목표로 한다. 이러한 연구는 설계변수 민감도 분석을 통하여 각각의 설계인자들이 타격성능에 미치는 영향을 파악함으로써 타격성능 및 안정성 향상을 위한 최적화 작업에 기틀을 마련하는 연구이다. 본 연구를 진행하는 순서는 다음과 같다. 먼저 드리프터의 동역학 해석모델을 개발하고 해석결과와 실험결과를 비교하여 해석모델의 신뢰성을 확보한다. 그 후 한국형 유압드릴에 적합하도록 드리프터를 재설계하며, 마지막으로 재설계된 드리프터의 설계변수 민감도 분석을 실시하여 타격성능에 미치는 영향을 파악하고 상위민감도를 가진 변수들을 추출한다. 드리프터의 해석모델은 다물리 해석 소프트웨어인 SimulationX를 사용하여 모델링 하였으며, 설계변수 민감도 분석은 EasyDesign을 사용하여 진행하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1554-1559
• /
• 2003

This study validated the musculoskeletal model of the human lower extremity by comparative study between calculated muscle parameters through simulation using modified hill-type model and measured them through isokinetic exercise. And the relationship between muscle forces and moments participated in motion was quantified from the results of simulation. For simulation of isokinetic motion, a three-dimensional anatomical knee model was constructed using trials of gait analysis and the EMG-force model was used to determine muscle activation level exciting muscles. The modified Hill-type model was used to calculate individual muscle forces and moments in dynmaic analysis and the results were validated by comparing them of experiments on BIODEX. The results showed that there was a high correlation between calculated torques from simulation and measured them from experiments for isokinetic motion(R=0.97). Therefore we concluded that the simulation by using musculoskeletal model was so useful means to predict and convalesce musculoskeletal-related diseases, and analyze unrealizable experiment such as clash condition.

• 한국전자파학회논문지
• /
• 제20권6호
• /
• pp.544-550
• /
• 2009

미사일 경고 레이다의 위협 판단 성능을 분석하기 위해서는 과대응률/미대응률 측면에서 얼마나 효과적으로 위협을 판단하는지를 분석해야 한다. 이러한 효과도 분석을 위해 Monte-Carlo 기법을 이용하여 시뮬레이션을 수행해 왔으나 시뮬레이션 수행 시간이 많이 걸리는 단점이 있었다. 본 논문에서는 단점을 보완하기 위해 확률 모델을 이용한 효과도 분석 기법을 제안하였다. 확률 모델을 설정하는 방법과 실제 시뮬레이션을 통해 전차에 장착한 레이다의 효과도를 분석한 결과를 보인다. 또한, Monte-Carlo 기법과 제안하는 확률 모델 이용 기법에 대한 시뮬레이션 수행 시간의 비교 결과를 제시하고자 한다.

• 한국분말재료학회지
• /
• 제9권4호
• /
• pp.245-250
• /
• 2002

In this paper we presented numerical method for the simulation of powder injection molding filling process, which is one of the key processes in powder injection molding. Rheological properties of powder binder mixture such as slip phenomena and yield stress were introduced into the numerical analysis model of powder injection molding filling simulation. Numerical model can be classified into two types. One is 2.5D model which can be introduced to a arbitrary thin geometry and the other is full 3D model which can be applied to a general 3D shape. For 2.5D model we showed the validity of our CAE system with several verification examples. Finally we suggested flow analysis model for 3D powder injection molding filling simulation.

• Journal of Biosystems Engineering
• /
• 제38권1호
• /
• pp.33-40
• /
• 2013

Purpose: The goal of this study was to build an accurate digital factory that evaluates the performance of a factory using computer simulation. To achieve this goal, we evaluated the effect of worker-related variables on production in a simulation model using comparative analysis of two cases. Methods: The overall work process and worker-related variables were determined and used to build a simulation model. Siemens PLM Software's Plant Simulation was used to build a simulation model. Also, two simulation models were built, where the only difference was the use of the worker-related variable, and the total daily production analyzed and compared in terms of the individual process. Additionally, worker efficiency was evaluated based on worker analysis. Results: When the daily production of the two models were compared, a 0.16% error rate was observed for the model where the worker-related variables were applied and error rate was approximately 5.35% for the model where the worker-related variables were not applied. In addition, the production in the individual processes showed lower error rate in the model that included the worker-related variables than the model where the worker-related variables were not used. Also, among the total of 22 workers, only three workers satisfied the IFRS (International Financial Reporting Standards) suggested worker capacity rate (90%). Conclusions: In the daily total production and individual process production, the model that included the worker-related variables produced results that were closer to the real production values. This result indicates the importance of worker elements as input variables, in regards to building accurate simulation models. Also, as suggested in this study, the model that included the worker-related variables can be utilized to analyze in more detail actual production. The results from this study are expected to be utilized to improve the work process and worker efficiency.

• 한국산학기술학회논문지
• /
• 제8권4호
• /
• pp.924-929
• /
• 2007

본 논문에서는 LED 생산 조립 공정에서의 시뮬레이션 분석모델을 제안한다. 모델의 목적은 LED 공정설계에 있어서의 여러 대안의 성능에 대해 평가하는 것이다. 시뮬레이션 모델을 개발하기 위하여 먼저 시간연구가 수행되었다. 동시에 ARENA 시뮬레이션 도구를 이용하여 공정분석을 수행하였다. 이 결과 LED 공정에 있어서의 문제점이 적시되었고 이를 개선하기 위한 대안이 논의되었다.

• Journal of Power Electronics
• /
• 제1권1호
• /
• pp.48-55
• /
• 2001

This paper describes a switching-level simulation model and scaled hardware model for SSSC, which is useful for analyzing the dynamic interaction between the SSC and the power transmission system. A detailed simulation model with EMTP was developed to verity the SSSC operation with control system, and its increasing capability of power transmission through the line for a typical one-machine infinite-bus system. The simulation results of the developed model are compared with the experimental results froma scaled model fo 2KVA rating for evaluation the whole system operation.

• 산업공학
• /
• 제18권1호
• /
• pp.22-34
• /
• 2005

This paper introduces a simulation model which is based on the process analysis of a semiconductor company. The objective of the simulation modelis not only to estimate the overall performancesof the company but also to evaluate the performances of various operation rules for shop floor control. First, in order to develop the simulation model, a time study is performed for each process after analyzing the processes for the company. Second, by using ARENA, a simulation model is constructed based on the process analysis and the time study. After the simulation model is tested and run, its results are discussed.