• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.534-536
• /
• 2009

We have fabricated solution-processed zinc-tin oxide thin film transistors (TFTs) and simple circuits on glass substrates. We report a solutionprocessed zinc-tin oxide TFTs on silicon wafer with mobility greater than 9 $cm^2/V{\cdot}s$ (W/L = 100/5 ${\mu}m$) and threshold voltage variation of less than 1 V after bias-stressing. Also, we fabricated solution-processed zinc-tin oxide circuits including inverters and 7-stage ring oscillators fabricated on glass substrates using the developed zinc-tin oxide TFTs.

• Korean journal of food and cookery science
• /
• v.19 no.3
• /
• pp.300-307
• /
• 2003

This research investigated the consumption of various rice-based processed foods of 279 housewives in Daegu. 70% of the housewives that responded to the question graduated from a high school or college, was 30∼40 years old and full-time housewives. The main places for purchasing the rice-based processed foods were large size discount store and supermarkets, as other industrial products and the family′s preference was the most critical factors in choosing the products. The fact that the main reason of purchasing the rice breads and cookies, instead of wheat, was "They may be good for health” indicated many housewives have a positive perception of rice-based foods. Among the rice-based processed foods, the using frequency of rice cake (dduk) was the highest, with rice cookies and rice drinks being the next most frequent. However, the frequencies of cooked rice (bob) and rice flour were very low. An analysis of the correlation for the using frequency of 15 rice-based processed foods showed that the use of rice cookies and breads, instead of wheat, was highly correlated to another 13 foods. The critical reasons why they do not consume cooked rice and rice flour were uncertainty of the purity of the rice and the addition of preservatives, and that with rice bread and noodles there was no information available about the products, and hey have a poor taste. The most common reasons of using cooked rice were no time to cook and simple curiosity about the products. However, the consumers were suspicious of containers, which were a potential cause of environmental hormones, and the high price of the products. Packed rice flour was mainly used as an ingredient to give the viscosity to a product. The advantages of using rice flour were that it was available to control the amount of buying and the convenience to buy. However, it was pointed out that the taste of products containing packed rice flour were poorer than that of rice flour ground at a mill.

• Genomics & Informatics
• /
• v.9 no.4
• /
• pp.189-193
• /
• 2011

Simple sequence repeats (SSRs) are ubiquitous short tandem duplications found within eukaryotic genomes. Their length variability and abundance throughout the genome has led them to be widely used as molecular markers for crop-breeding programs, facilitating the use of marker-assisted selection as well as estimation of genetic population structure. Here, we report a software application, "SSR-Primer Generator " for SSR discovery, SSR-primer design, and homology-based search of in silico amplicons from a DNA sequence dataset. On submission of multiple FASTA-format DNA sequences, those analyses are batch processed in a Java runtime environment (JRE) platform, in a pipeline, and the resulting data are visualized in HTML tabular format. This application will be a useful tool for reducing the time and costs associated with the development and application of SSR markers.

• Laser Solutions
• /
• v.11 no.1
• /
• pp.1-6
• /
• 2008

We proposed new light guide panel (LGP) fabrication method exploiting laser-processed inner scatterers and surface pattern. The proposed method has achieved LGP performance improvement in both brightness and uniformity. The inner scatterers and surface pattern of grid type were fabricated with a 2nd harmonic Nd:YAG pulse laser engraving system and a $CO_2$ laser scanning system, respectively. In the implementation of LGP, inner scatterers was arranged in accordance with linear or curved pattern with changing density and surface pattern was engraved on the surface of an inner-scatterers embedded LGP. The increase of scatterers' density and the use of surface patterns in both linear and curved pattern provided high luminance and uniformity enhancement. While thecurved pattern incorporated with increased scatterers' density and surface patterns yielded brightness improvement with preserving good uniformity, the linear pattern showed highly localized brightness near the light entrance of the LGP. We can also observe that the uniformity was mainly determined by pattern of inner scatterers, and the brightness was improved by the higher density and the utilization of surface patterns. From the results, the use of laser-processed inner and surface patterns can be a potential alternative for efficient and simple LGP fabrication method.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.31 no.1
• /
• pp.50-54
• /
• 2018

In this study, a femtosecond laser pre-annealing technology based on indium zinc oxide (IZO) thin-film transistors (TFTs) was investigated. We demonstrated a stable pre-annealing process to analyze the change in the surface structures of thin-films, and we improved the electrical performance. Furthermore, static and dynamic electrical characteristics of IZO TFTs with n-channel inverters were observed. To investigate the static and dynamic responses of our solution-processed IZO TFTs, simple resistor-load-type inverters were fabricated by connecting a $1-M{\Omega}$ resistor. The femtosecond laser pre-annealing process based on IZO TFTs showed good performance: a field-effect mobility of $3.75cm_2/Vs$, an $I_{on}/I_{off}$ ratio of $1.8{\times}10^5$, a threshold voltage of 1.13 V, and a subthreshold swing of 1.21 V/dec. Our IZO-TFT-based N-MOS inverter performed well at operating voltage, and therefore, is a good candidate for advanced logic circuits and display backplane.

• Current Applied Physics
• /
• v.18 no.11
• /
• pp.1300-1305
• /
• 2018

The tunable electronic performance of the solution-processed semiconductor metal oxide is of great significance for the printing electronics. In current work, transparent thin-film transistors (TFTs) with indium-zinc oxide (IZO) were fabricated as active layer by a simple eco-friendly aqueous route. The aqueous precursor solution is composed of water without any other organic additives and the IZO films are amorphous revealed by the X-ray diffraction (XRD). With systematic studies of atomic force microscopy (AFM), X-ray photoemission spectroscopy (XPS) and the semiconductor property characterizations, it was revealed that the electrical performance of the IZO TFTs is dependent on the concentration of precursor solution. As well, the optimum preparation process was obtained. The concentrations induced the regulation of the electronic performance was clearly demonstrated with a proposed mechanism. The results are expected to be beneficial for development of solution-processed metal oxide TFTs.

• Journal of Powder Materials
• /
• v.27 no.1
• /
• pp.14-24
• /
• 2020

In this work, the electrical explosion of wire in liquid and subsequent spark plasma sintering (SPS) was introduced for the fabrication of Ni-graphite nanocomposites. The fabricated composite exhibited good enhancements in mechanical properties, such as yield strength and hardness, but reduced the ductility in comparison with that of nickel. The as-synthesized Ni-graphite (5 vol.% graphite) nanocomposite exhibited a compressive yield strength of 275 MPa (about 1.6 times of SPS-processed monolithic nickel ~170 MPa) and elongation to failure ~22%. The hardness of Ni-graphite composite had a value of 135.46 HV, which is about 1.3 times higher than that of pure SPS-processed Ni (105.675 HV). In terms of processing, this work demonstrated that this processing route is a novel, simple, and low-cost method for the synthesis of nickel-graphite composites.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2006.11a
• /
• pp.138-141
• /
• 2006

This paper considers a two-machine flow-shop scheduling problem for minimizing mean flow time. Each job has three non-preemptive operations, where the first and third operations must be Processed on the first and second machines, respectively, but the second operation can be processed on either machine. A lower bound based on SPT rule is derived, which is then used to develop a branch-and-bound algorithm. Also, an efficient simple heuristic algorithm is developed to generate a near-optimal schedule. Numerical experiments are performed to evaluate the performances of the proposed branch-and-bound and the heuristic algorithm

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.28B no.5
• /
• pp.343-356
• /
• 1991

An efficient real-time implementation of digital filtering algorithms using a multiprocessor system in a ring network is investigated. The development time and cost for implementing a high speed signal processing system can be considerably reduced because algorithm are implemented in software using commercially available digital signal processors. This method is based on a parallel block processing approach, where a continuously supplied input data is divided into blocks, and the blocks are processed concurrently by being assigned to each processor in the system. This approach not only requires a simple interconnection network but also reduces the number of communications among the processors very much. The data dependency of the blocks to be processed concurrently brings on dependency problems between the processors in the system. A systematic scheduling method has been developed by using a processors which can be used efficiently, the methods for solving dependency problems between the processors are investigated. Implementation procedures and results for FIR, recursive (IIR), and adaptive filtering algorithms are illustrated.

• Current Applied Physics
• /
• v.18 no.11
• /
• pp.1415-1421
• /
• 2018

Unlike ordinary organic field-effect transistors (OFETs), saturation current is hardly to be found in vertical OFETs (VOFETs). Moreover, the fabrication process of patterned sourced for VOFETs is quite complex. In this current work, a simple solution processed VOFET with directly deposited intermediate silver source electrode has been demonstrated. The VOFET exhibits a high leakage current that induces an inversion polarity of its transistor behavior. Interestingly, a well-defined saturation current was observed in the linear scale of transfer characteristic. The VOFET operated with high-current density > $280mA/cm^2$ at $V_d=5V$. Overview potential of the fabricated device in display application is also presented. This preliminary work does open-up a new direction in VOFET fabrication and their application.