• Proceedings of the Korea Concrete Institute Conference
• /
• 1995.10a
• /
• pp.187-192
• /
• 1995

Four types of experiments were performed to check the similitude of member behavior between prototype and 1/10 scale models:(1) Test of slender columns with P- effect, (2)Test of short columns with and without confinement steel, (3)Test of simple beams without stirrups, and (4)T-beam test. Based on the results of experiments, the conclusions were made as follows : (1) The P- effect of slender columns can be almost exactly represented by 1/10 acale model. (2)The effect of confinement on short columns by the hoop steel can also roughly simulated by 1/10 scale model. (3)The failure modes of simple beams models were the yielding of tension steel followed by large diagonal tension cracking+compressive concrete failure. (4)The behaviors of prototype and 1/10 scale model in T-beams appear very similar.

• Communications for Statistical Applications and Methods
• /
• v.16 no.1
• /
• pp.75-83
• /
• 2009

Parallelism tests are proposed for slope in the simple linear regression models. In this paper, we suggest the parametric test using HSD testing method (Tukey,1953) and distribution-free test using Kruskal-wallis (1952) for more than three slopes. Monte Carlo simulation study is adapted to compare the power of the proposed methods with Wilks' Lambda multivariate procedure.

• Journal of Life Science
• /
• v.11 no.1
• /
• pp.65-67
• /
• 2001

In order to develop a rapid and simple method for testing the purity of radish hybrid seeds using a procedure based on the PCR(Polymerase chain reaction), eighty random primers were screened with the genomic DNA extracted from five day old seedlings of inbred parent lines and their F1 hybrids. Two primers, HRM-02 (5'-GAGACCAGAC-3') and HRM-19(5'-TGAGGCGTGT-3'), generate reproducible unique PCR patterns which can identify each parent lines as well as their hybrids. In actual test of randomly selected hybrid seeds using the two marker primers, the purity tested by one primer was exactly same as that of other primer. It suggests that one marker primer selected in this experiment is enough for the purity test of radish hybrid seeds. We demonstrates the use of RAPD(randomly amplified polymorphic DNAs) markers to identify each of inbred parent lines and hybrids by rapid and simple method.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.5
• /
• pp.170-177
• /
• 1997

In this study, an analysis technique using simple beam model for predicting structure crashworthiness of the passenger car side impacted with an angle by another passenger car was investigated. The simple model was composed of major beam-like side structure which carry almost all side impact load. A procedure of component collapse test, calculation of load carrying capability and dynamic simulation was carryed out sequentially. Transient dynamic algorithms and a computer program to simulate deformations and motions of the impacted car was developed. The developed procedure was applied to a 3 door passenger car side impacted with an angle of 75 degree and the analysis results show good agreements with the actual test results.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.1313-1323
• /
• 2008

The purpose of this study is to understand behaviors of slopes and determine soil parameters of slopes through the triaxial compression test and the direct shear test. Following results were obtained by comparing and analyzing model tests and analysis programs of slope stability. The safety factors of the Bishop's simple method, the Morgenstern Price method, the Spencer method and the GLE method were similar to each other but safety factors of the Fellenius method and the Janbu method were different from the formers. It was found that the Bishop's simple method, the Morgenstern Price method, the Spencer method and the GLE method could be used for design but attention should be paid to the Fellenius method and the Janbu method since they underestimated safety factor.

• Journal of the Korean Institute of Educational Facilities
• /
• v.18 no.2
• /
• pp.25-33
• /
• 2011

This study performs the objective evaluation on simple comparison and calculation works by students under LED illumination conditions according to three types of color temperatures (7000K, 5000K, 3000K) in the classroom, Since the objective of this study is to develop an electric lighting conditions suitable for students in the classroom, the learning performance under three types of LED illumination conditions were analyzed. The 4 kinds of simple tests concerning with learning performance were developed and test results under natural light and LED illumination by 3 types of color temperatures were analyzed. There were differences by t-test in most cases among simple experiment results of different illumination conditions ($p{\leq}.05$). It was confirmed that illumination condition plays an important role when students simply compare words or perform arithmetic calculations. The experimental results of this study might be applied to designing better luminous environment.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.7 no.2
• /
• pp.46-51
• /
• 2004

In this paper, reinforcement of soil shear strength by bamboo(substitute materials simulating a root system) are evaluated by soil strength parameters(apparent cohesion(c) and internal friction angle(tan${\Phi}$)), using simple shear tester which clearly depicts shear deformation and controls soil suction. The results show that the internal friction angle does not change under various soil suction conditions but the apparent cohesion, which reach a peak in suction of 45cm$H_2O$ near critical capillary head, is effected by soil suction. And the reinforcement of soil strength by bamboo are expressed by apparent cohesion more than internal friction angle. In addition the increment of apparent cohesion by bamboo reached a peak in suction 45cm$H_2O$ too.

• The Journal of Korean Orthopaedic Ultrasound Society
• /
• v.3 no.1
• /
• pp.15-20
• /
• 2010

Purpose: The goal of this study is to find out how useful ultrasonography is in measuring amount of effusion within the knee joint in comparison with physical examination and simple radiography. Materials and Methods: We evaluated total 60 cases which were suspicious for joint effusion. Average age was 61.3 years. The group was consisted of 22 males and 38 females, and 24 obese people and 36 non-obese people. Stroke test and patella floating test were done as physical examination. Amount of joint effusion was classified into 3 groups in simple lateral radiographic view and ultrasonography was used for recheck-up. Results: 39 cases were found positive in stroke test, and patella floating was shown in 20 cases. In simple lateral radiographic view, 47 cases of grade I, 7 cases of grade II and 3 cases of grade III were checked. Average $7.67{\pm}2.90mm$ amount of effusion was checked by ultrasonography. Amount of fluid in stroke test, patella floating test and simple lateral radiographic view showed close correlation with ultrasonography. Gender did not seem to affect physical examination, but strong correlation was found in female in simple radiography. Obese group showed closer relationship with all 3 exams compared with non-obese group. Physical examination was relatively effective with nonobese group, but not with obese group. And it was not easy to measure the amount of fluid with simple radiographic view, but we could obtain objective data from ultrasonography by measuring the amount of effusion dynamically. Conclusion: We concluded that more objective data was obtained with ultrasonography in comparison with physical examinations and simple radiography in the aspect of measuring amount of joint fluid.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.8
• /
• pp.9-16
• /
• 2004

For a System-on-a-Chip(SoC) comprised of multiple IP cores, test control techniques have been developed to perform the internal and external test efficiently relying on the various design for testability techniques such as scan and BIST(Built-In Self-Test). However the test area overhead is too expensive to guarantee diverse test link configurations. In this paper, at first we introduce a new flag based Wrapped Core Linking Module(WCLM) that enables systematic integration of IEEE 1149.1 TAP'd cores and P1500 wrapped cores. Then a simple test control technique, which can interconnect internal scan chains of different cores, is described with requiring least amount of area overhead compared with other state-of-art techniques. The design preserves compatibility with standards and scalability for hierarchical access.

• Transactions of the Korean hydrogen and new energy society
• /
• v.33 no.2
• /
• pp.158-163
• /
• 2022

The test method on the Type II high-pressure hydrogen storage tanks made of the metal wire hoop winding is a complex and high risk. Also closeup on the tank being test is difficult. In this study, we studied a mechanical test method for a high-pressure hydrogen tanks. This method must be simple, risk-free and possible to observe the change in microscopic behavior of a metal wire on a liner. As the results, it was possible to observe the microscopic behavior on the metal wire by the mechanical test method. Also, a simple and risk-free test was possible compared to the conventional test method for high pressure hydrogen tanks.