• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2009년도 IWAIT
• /
• pp.408-412
• /
• 2009

In this paper, a new efficient algorithm for global motion estimation is proposed. This algorithm uses a previous 4-parameter model based global motion estimation algorithm and M-estimator for improving the accuracy and robustness of the estimate. The first algorithm uses the block based motion vector fields and which generates a coarse global motion parameters. And second algorithm is M-estimator technique for getting precise global motion parameters. This technique does not increase the computational complexity significantly, while providing good results in terms of estimation accuracy. In this work, an initial estimation for the global motion parameters is obtained using simple 4-parameter global motion estimation approach. The parameters are then refined using M-estimator technique. This combined algorithm shows significant reduction in mean compensation error and shows performance improvement over simple 4-parameter global motion estimation approach.

• 한국해양공학회지
• /
• 제33권5호
• /
• pp.421-426
• /
• 2019

The directivity of an underwater sound source should be measured in an acoustically open field such as a calm sea or lake, or an anechoic water tank facility. However, technical difficulties arise when practically implementing this in open fields. Signal processing-based techniques such as a sound intensity method and near-field acoustic holography have been adopted to overcome the problem, but these are inefficient in terms of acquisition and maintenance costs. This study established a simple directivity estimation technique with data acquisition, filtering, and analysis tools. A numerical simulation based on an acoustic radiosity method showed that the technique is practicable for sound source directivity estimation in a diffused reverberant acoustic field like a reverberant water tank.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.326-330
• /
• 2001

A nonlinear speed control for a permanent magnet (PM) synchronous motor using a simple disturbance estimation technique is presented. By using a feedback linearization, scheme, the nonlinear motor model can be linearized. To compensate an undesirable output performance under the mismatch of the system parameters and load conditions the controller parameters will be estimated by using a disturbance observer theory. Since only the two reduced-order observers are used for the parameter estimation, the observer designs are considerably simple and the computational load of the controller for parameter estimation is negligibly small. The proposed control scheme is implemented on a PM synchronous motor using DSP TMS320C31 and the effectiveness is verified through the comparative experiments.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제17권5호
• /
• pp.1356-1376
• /
• 2023

Software effort estimation is one of the most difficult tasks in software development whereas predictability is also of equal importance for strategic management. Accurate prediction of the actual cost that will be incurred in software development can be very beneficial for the strategic management. This study discusses the latest trends in software estimation focusing on analogy-based techniques to show how they have improved the accuracy for software effort estimation. It applies the standard deviation technique to the expected value of analogy-based estimates to improve accuracy. In more than 60 percent cases the applied technique of this study helped in improving the accuracy of software estimation by reducing the Magnitude of Relative Error (MRE). The technique is simple and it calculates the expected value of cost or time and then uses different confidence levels which help in making more accurate commitments to the customers.

• 한국통신학회논문지
• /
• 제27권1A호
• /
• pp.51-57
• /
• 2002

본 논문에서는 이산 푸리에 변환(discrete Fourier transforma: DFT) 알고리듬의 분해 능력 향상을 위한 간단한 보간 기법을 제안한다. 제안된 보간 기법은 DFT의 크기(DFT를 위한 시간 축에서 이산 샘플의 개수)를 증가시키지 않고도 DFT 알고리듬의 주파수 및 위상 분해 능력을 현저히 향상시킬 수 있게 된다. 제안된 보간 기법의 핵심은 크기 및 위상 스펙트럼에서 내분점을 이용하는 것이다. 이 기법은 위성 통신 시스템과 같은 버스트 모드 디지털 전송을 하는 시스템에서 주파수 및 위상 오프셋을 동시에 미세 추정하는 곳에 사용될 수 있다. 실험 결과에 의하면 제안된 보간 기법을 사용하는 동시 추정기는 추정 성능에 있어서 현저한 개선을 얻게 됨을 확인할 수 있다.

• 한국통신학회논문지
• /
• 제31권1A호
• /
• pp.38-47
• /
• 2006

본 논문에서는 주파수 영역에서의 간단한 zero-forcing 기법을 이용한 속도 적응형 채널 추정 기법을 제안한다. 제안된 기법은 최적의 채널 추정 기법인 Wiener 필터의 주파수 응답을 구형(rectangular)으로 근사화하여 유도된다. 채널 추정 과정은 수신 신호에서 최대 도플러 주파수보다 큰 주파수 성분들을 제거함으로써 수행된다. 제안된 기법은 채널 계수와 이동체 속도에 대한 동시 추정 기법으로 확장 가능하며, 하나의 FFT 구조를 사용하여 효과적으로 구현 가능하다. 실험 결과를 통해 제안된 채널 추정 기법은 기존의 속도 적응형 채널 추정 기법들보다 넓은 속도 범위에서 낮은 채널 추정 MSE 성능을 보여주며, 확장된 동시 추정 기법은 다양한 채널 환경에서 안정된 추정 성능을 보인다. 마지막으로 제안된 기법에 대한 MSE 성능이 수식적으로 유도된다.

• 한국생산제조학회지
• /
• 제9권2호
• /
• pp.112-118
• /
• 2000

This paper deals with the application of sensitivity method to the parameter estimation for the dynamic analysis of gener-al mechanical system. In this procedure we take the derivatives of the given system with respect to a certain parameter and use this information to implement the steepest descent method. This paper will give two examples of this technique applied to simple vehicle models. This paper will give two examples of this technique applied to simple vehicle models. Simulation results show excellent convergence and accuracy of parameter estimates.

• 전기학회논문지
• /
• 제57권5호
• /
• pp.839-844
• /
• 2008

A novel state of health estimation method for hybrid electric vehicle lithium battery using sliding mode observer has been presented. A simple R-C circuit method has been used for the lithium battery modeling for the reduced calculation time and system resources due to the simple matrix operations. The modeling errors of simple model are compensated by the sliding mode observer. The design methodology for state of health estimation using dual sliding mode observer has been presented in step by step. The structure of the proposed system is simple and easy to implement, but it shows robust control property against modeling errors and temperature variations. The convergence of proposed observer system has been proved by the Lyapunov inequality equation and the performance of system has been verified by the sequence of urban dynamometer driving schedule test. The test results show the proposed observer system has superior tracking performance with reduced calculation time under the real driving environments.

• 한국지반공학회논문집
• /
• 제26권5호
• /
• pp.57-64
• /
• 2010

크리깅기법은 지반공학분야에서 지층 또는 지반정수의 공간적 분포 추정을 위하여 적용되고 있다. 각각의 크리깅기법에 따라서 추정결과가 상이하기 때문에 추정목적에 부합하는 크리깅 기법 선택은 중요한 문제이다. 본 논문에서는 단순크리깅, 정규크리깅, 일반크리깅을 사용하여 인천 송도국제도시의 압밀층 두께를 추정하였으며, 크리깅 기법에 따른 추정결과의 신뢰성을 분석하였다. 분석결과 단순크리깅은 정규크리깅과 일반크리깅에 비하여 측정자료와 멀리 떨어진 위치에서의 압밀층 두께를 크게 추정하며, 추정결과의 신뢰성도 낮았다. 일반크리킹은 측정자료와 멀리 떨어진 일부 위치에서 압밀층 두께를 음의 값으로 추정하는 것으로 나타났다. 압밀층 두께를 추정하기 위한 가장 적절한 크리깅 기법은 가장 신뢰성이 높고 물리적으로 합당한 추정범위 내의 값을 추정한 정규크리깅 기법인 것으로 분석되었다.

• Nuclear Engineering and Technology
• /
• 제53권12호
• /
• pp.3944-3951
• /
• 2021

Several reasons such as no free lunch theorem indicate that there is not a universal Feature selection (FS) technique that outperforms other ones. Moreover, some approaches such as using synthetic dataset, in presence of large number of FS techniques, are very tedious and time consuming task. In this study to tackle the issue of dependency of estimation accuracy on the selected FS technique, a methodology based on the heterogeneous ensemble is proposed. The performance of the major learning algorithms of neural network (i.e. the FFNN-BR, the FFNN-LM) in combination with the diverse FS techniques (i.e. the NCA, the F-test, the Kendall's tau, the Pearson, the Spearman, and the Relief) and different combination techniques of the heterogeneous ensemble (i.e. the Min, the Median, the Arithmetic mean, and the Geometric mean) are considered. The target parameters/transients of Bushehr nuclear power plant (BNPP) are examined as the case study. The results show that the Min combination technique gives the more accurate estimation. Therefore, if the number of FS techniques is m and the number of learning algorithms is n, by the heterogeneous ensemble, the search space for acceptable estimation of the target parameters may be reduced from n × m to n × 1. The proposed methodology gives a simple and practical approach for more reliable and more accurate estimation of the target parameters compared to the methods such as the use of synthetic dataset or trial and error methods.