• 마이크로전자및패키징학회지
• /
• 제20권3호
• /
• pp.11-18
• /
• 2013

Interest in copper nanoparticles has increased as an alternative for substituting silver nanoparticles because of its lower cost and less electromigration effect than silver. In this paper, the recent research trends and main results in wet-chemical synthesis of sub-100 nm Cu nanoparticles were summarized. The characteristics of synthesis were discussed with a classification such as modified polyol synthesis, modified hydrothermal synthesis, solvothermal synthesis, and the others, focussing on effects of capping agents, reductants, and pH. Information on the oxidation of synthesized copper nanoparticles were additionally commented.

• Carbon letters
• /
• 제27권
• /
• pp.50-63
• /
• 2018

An imprinted potentiometric sensor was developed for direct and selective determination of gabapentin. Sensor is based on carbon paste electrode adapted by graphene oxide that is decorated with silver nanoparticles and mixed with molecularly imprinted polymers nanoparticles using gabapentin as a template molecule. The synthesized nanoparticles were characterized by Fourier transmission infrared spectroscopy, transmission electron microscopy and X-ray diffraction. Under optimal experimental conditions, the studied sensor exhibited high selectivity and sensitivity with LOD of $4.8{\times}10^{-11}mol\;L^{-1}$. It provided a wide linearity range from $1{\times}10^{-10}$ to $1{\times}10^{-3}mol\;L^{-1}$ and high stability for more than 3 mo. The sensor was effectively used for the determination of gabapentin in pharmaceutical tablets and spiked plasma samples.

• Environmental Engineering Research
• /
• 제15권1호
• /
• pp.23-27
• /
• 2010

Genotoxic- and ecotoxic assessments of silver nanoparticles (AgNPs) were conducted on the freshwater crustacean Daphnia magna. AgNPs may have genotoxic effects on D. magna, given that the DNA strand breaks increased when exposed to this nanoparticle. Increased mortality was concomitantly observed with DNA damage in the AgNPs-exposed D. magna, which suggests AgNPs-induced DNA damage might provoke higher-level consequences. The results of the comparative toxicities of AgNPs and Ag ions suggest that AgNPs are slightly more toxic than Ag ions. Overall, these results suggest that AgNPs may be genotoxic toward D. magna, which may contribute to the knowledge relating to the aquatic toxicity of AgNPs on aquatic ecosystems, for which little data are available.

• 멤브레인
• /
• 제25권1호
• /
• pp.1-6
• /
• 2015

기존의 올레핀 운반체로 알려진 은 나노입자는 입자 표면에서 프로필렌 기체와 상호작용을 하여 올레핀 촉진수송이 이루어진다고 알려졌다. 그러나 은 나노입자가 공기 중에 쉽게 산화되어 표면에 생성된 산화은(AgO 또는 $Ag_2O$)의 효과일 것으로 예상되었다. 산화은의 효과를 규명하기 위해, 고분자 PVP에 AgO 또는 $Ag_2O$를 5 wt%로 넣고 분산시킨 후 전자수용체 TCNQ 또는 p-BQ를 0.005~0.02%까지 넣어 분리막을 제조하였다. 전자수용체가 첨가되면 산화은의 표면에 양극성화도 분산 정도가 향상될 것으로 기대하였고, 이는 기체투과 성능과 XPS 그리고 TEM에 의해 분리막의 특성이 확인되었다.

• 공업화학
• /
• 제18권2호
• /
• pp.173-177
• /
• 2007

PVA 농도, $AgNO_3$ 농도, IPA의 농도, 그리고 전자빔의 조사량 등의 다양한 조건에서 PVA 매트릭스에서 은입자를 생성하기 위하여 전자 빔을 이용하였다. PVA 농도, $AgNO_3$ 농도, 그리고 IPA의 농도가 증가하고 전자빔의 조사량이 증가함에 따라서 생성된 은입자의 분포도가 증가함을 알 수 있었다. 그리고 $AgNO_3$ 농도, IPA의 농도, 그리고 전자빔의 조사량은 은입자의 생성에 중요한 변수가 됨을 확인하였다. 이러한 결과들을 XRD, UV, 그리고 TEM 등으로 확인하였다. XRD로부터 생성된 입자가 은임을 확인하였다. 생성된 은입자의 분포 및 크기 등을 연구하기 위하여 UV와 TEM을 사용하였다.

• 공업화학
• /
• 제20권6호
• /
• pp.696-699
• /
• 2009

본 연구에서는 은 나노 입자와 탄산은(Silver Carbonate)을 이용하여 제조된 은나노/셀라이트(SN/C)와 탄산은/셀라이트(SC/C) 복합체의 대장균에 대한 항균특성을 조사하였다. SN/C와 SC/C 복합체의 특성은 주사전자현미경, X-선 회절법, 그리고 원자흡수분광법에 의해 알아보았다. SN/C와 SC/C 복합체의 대장균에 대한 최소 억제농도는 0.541과 0.344 ppm이었고 완전 사멸농도는 1.427과 1.623 ppm으로 나타났다. 상기의 결과로 SN/C와 SC/C 복합체의 대장균에 대한 항균효과를 확인할 수 있었다.

• Korean Chemical Engineering Research
• /
• 제45권4호
• /
• pp.364-371
• /
• 2007

본 연구에서는 연속상의 종류가 AOT 계면활성제 시스템의 water-in-oil(W/O) 마이크로에멀젼을 이용한 할로겐화은 나노입자 제조에 미치는 영향에 관하여 살펴보았다. 이를 위하여 계면활성제, 연속상 오일, 무기염 수용액으로 이루어진 삼성분 시스템에 대하여 탄화수소의 연속상 종류를 변화하면서 상평형 실험을 수행한 결과, 탄화수소의 사슬 길이가 증가함에 따라 계면활성제 시스템의 친수성이 증가하여 단일상으로 존재하는 W/O 마이크로에멀젼 영역은 증가하였다. 상평형 실험결과에 의하여 결정된 단일상의 영역 내에서 W/O 마이크로에멀젼을 이용하여 할로겐화은 나노입자를 제조한 결과, 10 nm 전후의 구형에 가까운 비교적 균일한 입자가 형성되었다. 사용한 연속상 탄화수소의 사슬 길이가 증가할수록 마이크로에멀젼의 film rigidity를 감소시킴에 따라 마이크로에멀젼 사이의 교환 속도가 빨라져서 생성된 할로겐화은 나노입자의 크기는 작아지고 반면에 개수는 증가하였다. 또한 동일한 시스템에서 무기염 수용액의 조성을 증가시킴에 따라 생성된 나노입자의 크기는 증가함을 알 수 있었다.

• 한국재료학회지
• /
• 제29권1호
• /
• pp.37-42
• /
• 2019

This study investigates Ag coated $Cu_2O$ nanoparticles that are produced with a changing molar ratio of Ag and $Cu_2O$. The results of XRD analysis reveal that each nanoparticle has a diffraction pattern peculiar to Ag and $Cu_2O$ determination, and SEM image analysis confirms that Ag is partially coated on the surface of $Cu_2O$ nanoparticles. The conductive paste with Ag coated $Cu_2O$ nanoparticles approaches the specific resistance of $6.4{\Omega}{\cdot}cm$ for silver paste(SP) as $(Ag)/(Cu_2O)$ the molar ratio increases. The paste(containing 70 % content and average a 100 nm particle size for the silver nanoparticles) for commercial use for mounting with a fine line width of $100{\mu}m$ or less has a surface resistance of 5 to $20{\mu}{\Omega}{\cdot}cm$, while in this research an Ag coated $Cu_2O$ paste has a larger surface resistance, which is disadvantageous. Its performance deteriorates as a material required for application of a fine line width electrode for a touch panel. A touch panel module that utilizes a nano imprinting technique of $10{\mu}m$ or less is expected to be used as an electrode material for electric and electronic parts where large precision(mounting with fine line width) is not required.

• 한국염색가공학회지
• /
• 제28권4호
• /
• pp.271-279
• /
• 2016

This study deals with antibacterial properties of nylon fiber treated with glycidyltrimethylammonium chloride(GTAC) and silver nanoparticles(AgNPs). Nylon fibers were soaked into GTAC(2-30%, v:v) solution for 20 min. After sample was pre-drying at $80^{\circ}C$ for 10min and cured at $180^{\circ}C$ for 5min. The AgNPs coating was accomplished by soaking in silver colloid solution at $45^{\circ}C$ for 90min. The coated nylon fibers were characterized by scanning electron microscopy-energy dispersive spectroscopy(SEM-EDS). EDS analysis indicated that AgNPs and GTAC was attached on nylon fibers. The treated nylon fibers showed antimicrobial properties against Escherichia coli(ATCC 43895), Pseudomonas aeruginosa(ATCC 13388) and Staphylococcus aureus(ATCCBAA-1707).

• Carbon letters
• /
• 제16권4호
• /
• pp.247-254
• /
• 2015

To improve photocatalytic efficiency, graphene/Ag/TiO₂ nanotube catalyst was synthesized, and its surface characteristics and photocatalytic activity investigated. For deposition of Ag nanoparticles on the TiO₂ nanotubes, a polymer compound containing CH₃COOAg/poly(L-lactide) was utilized, and the silver particles were precipitated by reducing the silver ions during the annealing process. Graphene deposition on the Ag/TiO₂ nanotubes was achieved using an electrophoretic deposition process. Based on the dye degradation results, it was determined that the photocatalytic efficiency was significantly affected by deposition of silver particles and graphene on the TiO₂ catalyst. Highly efficient destruction of the dye was obtained with the new graphene/Ag/TiO₂ nanotube photocatalyst. This may be attributed to a synergistic effect of the graphene and Ag nanoparticles on the TiO₂ nanotubes.