• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.3 s.36
• /
• pp.187-196
• /
• 2005

MEMS devices such as a vibratory gyroscope often suffer from a lower yield rate due to fabrication errors and the external stress. In the decoupled vibratory gyroscope, the main factor that determines the yield rate is the frequency difference between the sensing and driving modes. The gyroscope, fabricated with SOI (Silicon-On-Insulator) wafer and packaged using the anodic bonding, has a large wafer bowing caused by thermal expansion mismatch as well as non-uniform surfaces of the structures caused by the notching effect. These effects result in large distribution in the frequency difference, and thereby a lower yield rate. To improve the yield rate we propose a packaged SiOG (Silicon On Glass) technology. It uses a silicon wafer and two glass wafers to minimize the wafer bowing and a metallic membrane to avoid the notching. In the packaged SiOG gyroscope, the notching effect is eliminated and the warpage of the wafer is greatly reduced. Consequently the frequency difference is more uniformly distributed and its variation is greatly improved. Therefore we can achieve a more robust vibratory MEMS gyroscope with a higher yield rate.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.10
• /
• pp.894-900
• /
• 2006

This paper reports the fabrication and characterization of $32{\times}32$ thermal cantilever array for nano-scaled memory device applications. The $32{\times}32$ thermal cantilever array with integrated tip heater has been fabricated with micro-electro-mechanical systems(MEMS) technology on silicon on insulator(SOI) wafer using 9 photo masking steps. All of single-level cantilevers(1,024 bits) have a p-n junction diode in order to eliminate any electrical cross-talk between adjacent cantilevers. Nonlinear electrical characteristic of fabricated thermal cantilever shows its own thermal heating mechanism. In addition, n-channel high-voltage MOSFET device is integrated on a wafer for embedding driver circuitry.

• Applied Microscopy
• /
• v.42 no.3
• /
• pp.151-157
• /
• 2012

The microstructure of various shapes of stacking fault pyramids (SFPs) formed in multiple implant/anneal Separation by Implanted Oxygen (SIMOX) material were investigated by plan-view and cross-sectional transmission electron microscopy. In the multiple implant/anneal SIMOX, the defects in the top silicon layer are confined at the interface of the buried oxide layer at a density of ${\sim}10^6\;cm^{-2}$. The dominant defects are perfect and imperfect SFPs. The perfect SFPs were formed by the expansion and interaction of four dissociated dislocations on the {111} pyramidal planes. The imperfect SFPs show various shapes of SFPs, including I-, L-, and Y-shapes. The shape of imperfect SFPs may depend on the number of dissociated dislocations bounded to the top of the pyramid and the interaction of Shockley partial dislocations at each edge of {111} pyramidal planes.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.7 no.3
• /
• pp.183-195
• /
• 2007

MEMS technology is proven to be an enabling technology to realize many components for optical networking applications. Due to its widespread applications, VOA has been one of the most attractive MEMS based key devices in optical communication market. Micromachined shutters and refractive mirrors on top of silicon substrate or on the device layer of SOI (Silicon-on-insulator) substrate are the approaches trapped tremendous research activities, because such approaches enable easier alignment and assembly works. These groups of devices are known as the planar VOAs, or two-dimensional (2-D) VOAs. In this review article, we conduct the comprehensively literature survey with respect to MEMS based planar VOA devices. Apparently MEMS VOA technology is still evolving into a mature technology. MEMS VOA technology is not only the cornerstone to support the future optical communication technology, but the best example for understanding the evolution of optical MEMS technology.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2004.12a
• /
• pp.31-32
• /
• 2004

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.353-353
• /
• 2010

본 논문에서는 소스와 드레인의 형성에 있어서 implantation 이 아닌 silicide를 형성시켜서 최고온도 $500^{\circ}C$가 넘지않는 저온공정을 실현하였고, silicon-on-insulator (SOI) 기판이 아닌 solid phase crystallization (SPC) 결정화 방법을 이용하여 결정화 시킨 SPC-TFT 기판을 사용하였다. Silicide 의 형성은 pt를 증착하여 furnace에서 열처리를 실시하여 형성하였다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2007.07a
• /
• pp.319-320
• /
• 2007

We report on the fabrication of two-dimensional Silicon On Insulator (SOI) photonic crystal (PhC) superprism. To optimize the design of 2-D SOI PhC superprism, the photonic band structures (TE-polarization) for triangular lattices and the dispersion surfaces were calculated and analyzed by the plane wave expansion method. Dense 2-D SOI PhC superprism nanostructures with taper input and output waveguide microstructures were successfully fabricated by nanoimprint lithography, followed by inductively coupled plasma (ICP) etching.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.4 no.1
• /
• pp.1-11
• /
• 2004

A FinFET, a novel double-gate device structure is capable of scaling well into the nanoelectronics regime. High-performance CMOS FinFETs , fully depleted silicon-on-insulator (FDSOI) devices have been demonstrated down to 15 nm gate length and are relatively simple to fabricate, which can be scaled to gate length below 10 nm. In this paper, some of the key elements of these technologies are described including sub-lithographic pattering technology, raised source/drain for low series resistance, gate work-function engineering for threshold voltage adjustment as well as metal gate technology, channel roughness on carrier mobility, crystal orientation effect, reliability issues, process variation effects, and device scaling limit.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1993.05a
• /
• pp.43-44
• /
• 1993

In this study SOI MOSFET model of the structure with 4-terminals and 3-interfaces is proposed. An SOI MOSFET is modeled with the equivalent circuit considered the interface capacitances. Parameters of SOI MOSFET device are extracted, and the electrical characteristics due to back-bias change is simulated. In SOI-MOSFET model device we describe the characteristics of threshold voltage, subthreshold slope, maxium electrical field and drain currents in the front channel when the back channel condition move into accmulation, depletion, and inversion regions respectively.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.216-216
• /
• 2010

Floating gate를 이용한 플래시 메모리와 달리 질화막을 트랩 저장층으로 이용한 silicon-oxide-silicon nitride-oxide silicon (SONOS) 구조의 플래시 메모리 소자는 동작 전압이 낮고, 공정과정이 간단하며 비례 축소가 용이하여 고집적화하는데 유리하다. 그러나 SONOS 구조의 플래시 메모리소자는 비례 축소함에 따라 단 채널 효과와 펀치스루 현상이 커지는 문제점이 있다. 비례축소 할 때 발생하는 문제점을 해결하기 위해 플래시 메모리 소자를 FinFET과 같이 구조를 변화하는 연구는 활발히 진행되고 있으나, 플래시 메모리 소자를 제작하는 기판의 변화에 따른 메모리 소자의 전기적 특성 변화에 대한 연구는 많이 진행되지 않았다. 본 연구에서는 silicon-on insulator (SOI) 기판의 유무에 따른 멀티비트를 구현하기 위한 듀얼 게이트 가진 SONOS 구조를 가진 플래시 메모리 소자의 subthreshold 전압 영역에서의 전기적 특성 변화를 조사 하였다. 게이트 사이의 간격이 감소함에 따라 SOI 기판이 있을 때와 없을 때의 전류-전압 특성을 TCAD Simulation을 사용하여 계산하였다. 전류-전압 특성곡선에서 subthreshold swing을 계산하여 비교하므로 SONOS 구조의 플래시 메모리 소자에서 SOI 기판을 사용한 메모리 소자가 SOI 기판을 사용하지 않은 메모리 소자보다 단채널효과와 subthreshold swing이 감소하였다. 비례 축소에 따라 SOI 기판을 사용한 메모리 소자에서 단채널 효과와 subthreshold swing이 감소하는 비율이 증가하였다.