• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.165-165
• /
• 2013

Nickel oxide was deposited on mesoporous silica by atomic layer deposition (ALD) consisting of sequential exposures to Ni(cp)2 and $H_2O$. NiO/silica samples were characterized by inductively coupled plasma-mass spectroscopy (ICP-MS), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), etc. The flow-type reactor was used to measure activity of NiO/silica catalyst for catalytic combustion of toluene. The activity of NiO/silica catalyst was evaluated in terms of toluene removal efficiency and selectivity to $CO_2$ and compared with those of bare nickel oxide nanoparticles. In order to investigate influence of reaction temperature on combustion aspect, the catalytic combustion experiments were carried out at various temperatures. We show that both bare and supported NiO can be efficient catalysts for total oxidation of toluene at a temperature as low as $250^{\circ}C$.

• Macromolecular Research
• /
• 제17권5호
• /
• pp.346-351
• /
• 2009

$TiCl(O-i-Pr)_3/SiO_2$ and $Ti(O-i-Pr)_4/SiO_2$ were prepared by immobilizing chlorotitanium (IV) isopropoxide ($TiCl(O-i-Pr)_3$) and titanium (IV) isopropoxide ($Ti(O-i-Pr)_4$), to pretreated silica. The effect of the polymerization reaction conditions on the catalytic activity and characteristics of the resulting PLA were investigated. The catalytic conversion, molecular weight and polydispersity index (PDI) of the PLA produced on the titanium alkoxide supported catalysts increased proportionally with the reaction temperature. When the PLA was synthesized in bulk polymerization, the PLA produced with the supported catalysts had higher molecular weight than those with homogeneous catalysts. The melting temperature of the polymer produced with silica supported alkoxide catalysts was approximately $170-180^{\circ}C$.

• 공업화학
• /
• 제27권3호
• /
• pp.239-244
• /
• 2016

본 총설에서는 $CO_2$와 에폭시 화합물의 부가반응에서 무정형, SBA, MCM 또는 상업적으로 쉽게 이용 가능한 다양한 silica 지지체에 담지된 이온성 액체의 촉매적 적용가능성에 대하여 검토하였다. $CO_2$ 부가반응에 의한 5원환 카보네이트의 합성에 대하여 담지된 이온성 액체의 구조적인 영향과 silica 지지체의 종류에 따른 촉매 활성을 검토한 바, 관능기 또는 금속을 보유한 이온성 액체인 경우에 촉매 성능이 개선됨을 알 수 있었다. 또한 silica에 담지된 이온성 액체(SSIL) 촉매의 재사용성과 반응메커니즘을 조사하여 제시하였다.

• 한국수소및신에너지학회논문집
• /
• 제22권4호
• /
• pp.415-423
• /
• 2011

HI decomposition step certainly demand catalytic reaction for efficient production of hydrogen in SI process. Platinum catalyst can apply to HI decomposition reaction as well as hydrogenation or dehydrogenation. Generally, noble metal is used as catalyst which is loaded form for getting high dispersion and wide active area. In this study, Pt was loaded onto zirconia, ceria, alumina, and silica by impregnation method. HI decomposition reaction was carried out under the condition of $450^{\circ}C$, 1atm, and $167.76h^{-1}$ (WHSV) in a fixed bed reactor for measuring catalytic activity. And property of a catalyst was observed by BET, TEM, XRD and chemisoption analysis. On the basis of experimental results, we discussed about conversion of HI according to physical properties of the loaded Pt catalyst onto each support.

• 폴리머
• /
• 제37권5호
• /
• pp.600-605
• /
• 2013

본 연구에서는 polylactide(PLA) 중합 촉매로 알루미늄계 유기금속화합물인 triethylaluminium(TEAL)을 이용하여 실리카에 담지하고 이를 이용하여 L-lactide 벌크중합을 진행하였다. TEAL을 실리카에 담지하기 위해 촉매 투입량, 담지시간, 담지온도를 변화시켜 촉매를 합성하고 이를 이용하여 생성된 PLA의 중합특성을 확인하였다. 담지된 촉매 투입량이 증가할수록 전환율이 높고 촉매 투입량이 8 mmol/g-silica일 경우에 가장 높은 분자량을 보였다. 담지시간을 변화시켜 합성된 담지촉매를 이용하여 중합한 결과 담지시간이 증가할수록 전환율 및 분자량이 증가하였다. 담지온도를 변화시켜 촉매를 합성하기 위해 용매로 hexane과 toluene을 사용하였다. 담지온도를 변화시켜 합성된 촉매로 L-lactide 중합한 결과, hexane을 용매로 사용하고 담지온도가 $50^{\circ}C$일 경우에 전환율 및 분자량이 높았다.

• Bulletin of the Korean Chemical Society
• /
• 제28권4호
• /
• pp.529-532
• /
• 2007

Combined temperature programmed reaction (TPR) and infrared (IR) spectroscopic studies for Fischer- Tropsch reaction have been performed over Ru/SiO2 and Ru-Ag/SiO2 supported catalysts. Reaction of linearly absorbed CO with hydrogen starts at 375 K over Ru/SiO2 catalyst and reaches maximum at 420 K accompanied with an intensity decrease of linear CO absorption. The reaction with bridged absorbed CO peaks around 510-535 K. Addition of Ag yields mixed Ru-Ag bimetallic sites while it suppresses the formation of bridged bonded CO. Formation of methane on this modified surface occurs at 390 K and reaches maximum at 444 K. Suppression of hydrogen on the Ag-doped surface also occurs resulting in the formation of unsaturated hydrocarbons and of CHx intermediates not observed with Ru/SiO2 catalyst. Such intermediates are believed to be the building blocks of higher hydrocarbons during the Fischer-Tropsch synthesis. Linearly absorbed CO is found to be more reactive as compared to bridged CO. The Ag-modified surface also produces CO2 and carbon. On this surface, hydrogenation of CO begins at 390 K and reaches maximum at 494 K. The high temperature for hydrogenation of absorbed CO and C over Ru-Ag/SiO2 catalyst as compared to Ru/SiO2 catalyst is due to the formation of Ru-Ag bimetallic surfaces impeding hydrogen adsorption.

• 대한화학회지
• /
• 제52권4호
• /
• pp.454-456
• /
• 2008

• Bulletin of the Korean Chemical Society
• /
• 제32권2호
• /
• pp.656-658
• /
• 2011

A green and efficient method for the synthesis of 3,4-dihydropyrimidin-2(1H)-ones and -thiones through one-pot three-component reaction of ethyl acetoacetate, an aryl aldehyde, and urea or thiourea in acetonitrile using silica gel-supported polyphosphoric acid (PPA-$SiO_2$) as catalyst is described. Compared to the classical Biginelli reaction conditions, the present methodology offers several advantages such as high yields, relatively short reaction times, mild reaction condition and a recyclable catalyst with a very easy work up.

• Bulletin of the Korean Chemical Society
• /
• 제34권12호
• /
• pp.3677-3680
• /
• 2013

Novel tri- and tetra-substituted pyrimido[4,5-d]pyridazines-2(1H,3H,7H)-ones have been synthesized via the regiospecific condensation reaction of hydrazine derivatives with 5-acetyl-4-aryloyl-6-methyl-3,4-dihydropyrimidinones in the presence of $SiO_2-Y(NO_3)_3$ as a green and recyclable catalyst under solvent-free conditions. All products were obtained in high yields and short reaction time. Employing this method is in accord with green chemistry principles.

• Bulletin of the Korean Chemical Society
• /
• 제30권10호
• /
• pp.2419-2421
• /
• 2009

A simple and efficient method has been developed for Knoevenagel condensation between aldehydes or ketones and active methylene group by stirring in methylene chloride at 60 ${^{\circ}C}$ under heterogeneous conditions using silica supported ammonium acetate. The products are obtained in excellent yields and are in a state of high purity. The structures of the products were confirmed by IR, $^1H$ NMR and mass spectral data and comparison with authentic samples available commercially.