• Economic and Environmental Geology
• /
• v.4 no.4
• /
• pp.167-215
• /
• 1971

I. Purpose and Importance of the Study The purpose of the present study is to clarify to geological, mineralogical, and physico-chemical properties of the clay minerals deposits imbedded in the Tertiary sediments in the areas between. Pohang and Ulsan along southeastern coastal region of Korea. These clays are being mined and utilized for filter and insecticide after activation or simple pulverizing, nontheless activated clays are short coming as chemical industry in Korea has been rapidly grown in recent years. In spite of such increase in clay demand, no goological investigation on clay deposits nor physico-chemical properties of the clays have been carried out up to date. Consequently activated clays produced in Korea is not only of low grade but also of shortage in supply, so that Korea has to import activated clays of better grade. The importance of the present study lies, therefore, on that guiding principle could be laid down by knowing stratigraphical horizons, of clay deposits and fundamental data of improving grade of activated clays might be derived from the results of physico-chemical examinations. II. Contents and Scope of the study The contents of the study are pinpointed down in the following two subjects: 1) General geological investigation of Tertiary formations distributed in the areas between Pohang and UIsan, and detail geological study of the bentonitic clay deposits imbedded in them. 2) To clarifty physico-chemical characteristics of the clays by means of chemical analysis, X-ray diffraction and electron microscope. The scope of the study involves the following there points: i) Regional geological investigation-This investigation has been carried out in order to find out the distribution of Tertiary sediments and exact location of clay mineral deposits in the areas between Pohang and UIsan. ii) Detail geological investigation-This has been concentrated in and around the clay deposits which. had been found out by the regional investigation. iii) Laboratory researchs include i) age determination and correlation of Tertiary sediments by paleontological study, and ii) Chemical analysis, X-ray diffraction, and electron microscopic studies on clays, samples taken from various clay deposits. III. Research Results and Suggestions 1) The geology of the area investigated is composed mainly of Janggi and Beomgokri groups of Miocene age in ascending order rested on the upper Silla system, Balkuksa granite and volcanic rocks of upper Cretaceous age as base. 2) Janggi group is composed in ascending order of Janggi conglomerate, Nultaeri rhyolitic tuff, Keumkwangdong shale, two beds of lignite-bearing formations which consist of alternation of conglomerate, sandstone and mudstone, and andesitic, rhyolitic, and basaltic tuff beds. 3) Beomgokri group is mainly composed of andesitic to rhyolitic tuff interlayered by conglomerate and tuffaceous sandstone. In the areas around boundary between North-and South Kyeongsang-do is distributed Haseori farmation which is composed of conglomerate, sandstone, mudstone and andesitic to rhyolitic tuff, and which is correlated to Eoilri formation of Janggi group. 4) Clay deposits of the area are interbedded in Eoilri, Haseori, Nultaeri tuff, Keumkwangdong shale, upper and lower horizon of the lower lignite-bearing seam, and Keumori rhyolitic tuff formations of Janggi group; and are genetically classi.fied into four categories, that is, i) those derived from volcanic ash beds(Haseori and Daeanri deposits), ii) those of secondary residual type from rhyolitic tuff beds(Seokupri deposits), iii) Clay beds above and beneath the lignite seams, (Janggi and Keumkwangdong deposits), and iv) those derived from rhyolitic tuff beds(Sangjeong and Tonghae deposits). 5) Mineral constituents of clay deposits are, according to X-ray diffraction, montmorillonite accompanied in different degree by cristobalite, plagioclase, quartz, stilbite, and halloysite in rare occasion. The clays are grouped according to mineral composition into four types; i) those consist mostly of montmorillonite, ii) those composed of montmorillonite and cristobalite, iii) those composed of montmorillonite and plagioclase, and iv) those composed of montmorillonite, plagioclase and quartz. 6) Clays interbedded in Haseori formation and vicinity of lignite seams belong to the first type, are of good quality and derived either from volcanic ash bed, or primary clay beds near lignite seams. Clays belonged to other types are derived from weathering of rhyolitic tuff formations and their quality varies depending upon original composition and degree of weathering. Few clays in secondary residual type contain small amount of halloysite. 7) Judging from analytical data, content of silica($SiO_2$) varies proportionally with content of cristobalite, and alumina($Al_2O_3$) content does not vary with that of plagioclase, but increases in the sedimentary bedded type of deposits. 8) It is unknown whether or not these days could be upgraded by beneficiation since no grain size of these impurities nor beneficiation test had been studied. 9) Clay beds derived from valcanic ash layers or sedimentary layers at the vicinity of lignite seams are thin in thickness and of small, discontinueous lenticular shape, although they are of good quality; and those derived from rhyolitic tuff formations or residual type from tuff are irregular in both occurrence and quality. It is, therefore, not only very difficult but also meaningless to calculate its reserve, and reserve estimation, even if done, will greatly be deviated from practically minable one. Consequently, way of discovery and exploitation of clay deposits in the area under consideration is to check the geologically favorable areas whenever needed.

• The Journal of Korean Academy of Prosthodontics
• /
• v.52 no.1
• /
• pp.1-8
• /
• 2014

Purpose: The purpose of this study is to evaluate the effect of applying Silano-pen to feldspathic porcelain and zirconia on shear bond strength with composite resin. Materials and methods: Feldspathic porcelain and zirconia specimens were produced into 30 per each 2 mm thick and 12 mm in diameter and their surface was made smooth and even and then embedded in acrylic resin. The specimens were divided into each Group F (Feldspathic porcelain) and Group Z (Zirconia), (1) Hydrofluoric acid etching and silane (F1 & Z1), (2) Silano-pen and silane (F2 & Z2), (3) Hydrofluoric acid etching and Silano-pen, silane (F3 & Z3). After surface conditioning, substrate surfaces of the specimen were examined by SEM. Composite resin cylinders (2 mm high, 3 mm in diameter)were bonded to specimen and shear bond strength between ceramic and composite resin was measured by using universal testing machine. The measured values were statistically analyzed by using two way ANOVA and Tukey's multiple comparison test (${\alpha}=.05$). Results: In the scanning electron micrograph of the treated ceramic surface, Group F2 and F3 appeared the high roughness and Group Z3 appeared the highest density of silica particle. In Feldspathic porcelain, the result of measuring shear bond strength showed that Group F3 was measured to be highest and Group F1 was measured to be lowest but there was no statistical significance among Groups. In zirconia, Group Z3 was measured to be highest and Group Z1 was measured to be lowest and there was statistical significance among Groups (P<.05). Conclusion: In zirconia, applying hydrofluoric acid etching and then Silano-pen and silane is effective for composite resin adhesion.

• The Korean Journal of Nuclear Medicine
• /
• v.34 no.5
• /
• pp.403-409
• /
• 2000

Objectives: Due to the heterogeneous receptor distribution and changes of receptor status over time, the biochemical measurement of estrogen receptor status of biopsy specimens is not sufficient to diagnose breast cancer. As a result, I-123 labeled estradiols have been applied for the diagnosis. The purpose of this study was to develop a suitable radioligand for imaging estrogen receptor-positive human breast tumors. Methods: Among the various estradiol derivatives, $17{\alpha}-[^{123}I]$iodovinyl estradiol ($[^{123}I]$IVE) has been prepared from $17{\alpha}$-ethynyl estradiol. Labeling of $E-17{\alpha}-[^{123}I]$iodovinyl estradiol (E-$[^{123}I]$IVE) was carried out using peracetic acid with $[^{123}I]NaI\;and\;Z-[^{123}I]IVE$ labelling was archived using chloamine-T/HCl solution with $[^{123}I]$NaI. Labeling yield was determined by silica thin-layer chromatography (TLC) and radiochemical purity was measured by high performance liquid chromatography (HPLC). The biodistribution of E-$[^{123}I]$IVE was measured in immature female rats at 60 min, 120 min and 300 min after injection. Results: The labeling yield of two isomers was 92% and 94% ($E-[^{123}I]IVE\;and\;Z-[^{123}I]IVE$, respectively). The radiochemical purity was more than 98% after purification. The highest uptake was observed at 120 min in uterus (3.11% ID/g for E-$[^{123}I]$IVE). Conclusion: These results suggest the possibility of using E-$[^{123}I]$IVE as an imaging agent for the evaluation of the evaluation of the presence of estrogen receptor in patients with breast cancer.

• Journal of the Mineralogical Society of Korea
• /
• v.29 no.3
• /
• pp.155-165
• /
• 2016

Understanding the effect of boron content on atomic structures of boron-bearing multicomponent silicate melts is essential to reveal the atomistic origins of diverse geochemical processes involving silica-rich magmas, such as explosive volcanic eruption. The detailed atomic environments around B and Al in boron-bearing complex aluminosilicate glasses yield atomistic insights into reactivity of nuclear waste glasses in contact with aqueous solutions. We report experimental results on the effect of boron content on the atomic structures of sodium borate glasses and boron-bearing multicomponent silicate melts [malinkoite ($NaBSiO_4$)-nepheline ($NaAlSiO_4$) pseudo-binary glasses] using the high-resolution solid-state NMR ($^{11}B$ and $^{27}Al$). The $^{11}B$ MAS NMR spectra of sodium borate glasses show that three-coodrinated boron ($^{[3]}B$) increases with increasing $B_2O_3$ content. While the spectra imply that the fraction of non-ring species decreases with decreasing boron content, peak position of the species is expected to vary with Na content. Therefore, the quantitative estimation of the fractions of the ring/non-ring species remains to be explored. The $^{11}B$ MAS NMR spectra of the glasses in the malinkoite-nepheline join show that four-coordinated boron ($^{[4]}B$) increases as $X_{Ma}$ [$=NaBSiO_4/(NaBSiO_4+NaAlSiO_4)$] increases while $^{[3]}B$ decreases. $^{27}Al$ MAS NMR spectra of the multicomponent glasses confirm that four-coordinated aluminum ($^{[4]}Al$) is dominant. It is also observed that a drastic decrease in the peak widths (full-width at half-maximum, FWHM) of $^{[4]}Al$ with an addition of boron ($X_{Ma}=0.25$) in nepheline glasses. This indicates a decrease in structural and topological disorder around $^{[4]}Al$ in the glasses with increasing boron content. The quantitative atomic environments around boron of both binary and multicomponent glasses were estimated from the simulation results of $^{11}B$ MAS NMR spectra, revealing complex-nonlinear variation of boron topology with varying composition. The current results can be potentially used to account for the structural origins of the change in macroscopic properties of boron-bearing oxide melts with varying boron content.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.1
• /
• pp.139-146
• /
• 2015

The amount of by-product from sulphur increases in domestic industrial facilities. However, the amount of its consumption is limited so that the amount of unused sulphur continues to increase. Therefore, in this study, the use sulfur polymer as the concrete surface protecting material was conducted. The compressive strength showed that as the substitution ratio of filler increased up to 40%, the compressive strength also increased. A high compressive strength was shown at the curing temperature of $40^{\circ}C$ (SS, FA) and $60^{\circ}C$ (OPC) according to the type of filler. The difference of compressive strength between air dry curing and water curing was insignificant so that there was no significant influence of moisture during curing process. The evaluation result of bond strength showed that the highest bond strength was shown at the air-dry condition of $40^{\circ}C$ regardless of type of filler. Bonding didn't occur properly during water curing in comparison to air dry curing. Also, in case of the specimen cured at $60^{\circ}C$, discoloration and hair cracks appeared due to the influence of temperature, and the highest bond strength was shown at the substitution ratio of 20% (SS, FA) and 30% (OPC) according to the type of filler. The releasing test result of harmful substance showed that no harmful substance was released, so there is no harmfulness in the surface protecting material using sulfur polymer. As a conclusion drawn in this study, it is most appropriate to substitute silica by approximately 20%, mix and cure at the air-dry condition of $40^{\circ}C$ in order to use sulfur polymer as the surface protecting material.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.59 no.3
• /
• pp.216-222
• /
• 2014

The purpose of this study was to know the seed longevity of rice (Oryza sativa L.) germplasm for effective viability monitoring. The longevity was determined via germination tests of 3,066 accessions of rice germplasm from the National Agrobiodiversity Center, Rural Development Administration, Korea. The rice germplasm accessions have been conserved at a mid-term storage ($4^{\circ}C$, 30% RH) in plastic bottle containing dehydrated (blue) silica-gel and long-term storage ($-18^{\circ}C$, 35% RH) in hermetically sealed metal can on either sides for 25~26.5 years. The final germination percentages of 3,066 rice germplasm accessions of $6.5{\pm}1.0%$ seed moisture content with 94% initial germination stored at $4^{\circ}C$ for 26.5 years declined to 47% while at $-18^{\circ}C$ for 25 years maintained high germinability as 93%. Germination time courses, which represent the average performance of rice ecotypes stored at $4^{\circ}C$ and 30% RH, were fitted regression equation, to calculate the time at which germination characteristically declined to 50% ($P_{50}$). These $P_{50}$ values of Indica, Japonica, Javanica and Tongil type in rice were 39.9, 22.9, 25.4 and 31.8 years, respectively. The rice germplasm stored at $4^{\circ}C$ could be clustered in 4 groups using quartile of final germination after 26.5 years storage. The seed longevity ($P_{50}$) of each group was estimated by regression equation of changed germination percentages according to storage periods. The $P_{50}$ values of group I, group II, group III and group IV were 21.1, 23.6, 30.0 and 75.7 years.

• Korean Journal of Poultry Science
• /
• v.21 no.3
• /
• pp.157-168
• /
• 1994

This study was carried out to elucidate the time course variation of vitamin $D_{3}$ (V$D_{3}$) and 25-hydroxyvitamin $D_{3}$ [25(OH)$D_{3}$] contents in the liver and skeleton of 3-wk old broiler chicks when treated with different UV irradiation procedure. Day-old Hubbard chicks were fed vitamin D deficient diet for 3 wk and exposed to medium wave ultraviolet(UVB) light with different irradiation procedures. Procedure I was 30 min continuous irradiation(O.204 mJ /$cm^{2}$) and Procedure II was three seperate 10 min irradiation with 12 h intervals, and Procedure III was three seperate 10 min irradiation with 24 h intervals. The liver and skeleton samples were collected at 10 different times between 0000~2400 h after the last irradiation. The V$D_{3}$ and 25(OH)$D_{3}$ fractions wereseparated by Sep-Pak silica cartridge and the concentrations were determined by normal phase HPLC. The mean content of V$D_{3}$ in the liver of the birds treated by Procedure II was 6.68 ng /g, which was higher than 5.60 and 5.30 ng /g from Procedure I and Ill, respectively(P<.O5). With regard to the effect of elapsed time after UVB irradiation on the V$D_{3}$ concentration of the liver, 96 h treatment showed the highest value(13.08 ng/g)(P<.05). There was a significant(P$D_{3}$ were significantly(P$D_{3}$ in the skeleton of tibia and femur, there were no significant differences among Procedure I, II and III, but significant differences were found among those from various elapsed time after irradiation, The highest value was shown at 96 h(O.99 ng /g) treatment, and interaction between irradiation procedure and elapsed time was not significant. With regard to the mean content of 25(OH)$D_{3}$ in bone, the Procedure II(18.79 ng /g) and III(17.73 ng /g) showed higher values than Procedure I did (P<.05), and the 12 h elapsed time showed the highest value(31.17 ng /g) among 10 treatments (P<.05), however, there was no significant interaction between exposing procedure and elapsed time. In conclusion, the Procedure II would he more desirable than Procedure I or III to produce more V$D_{3}$ and 25(OH)$D_{3}$ in the liver and skeleton of birds by exposing to the UVB light. Also, it was verified that 25(OH)$D_{3}$ increases more quickly than V$D_{3}$ in both tissues tested and is utilized more quickly to recover from the rickets of chicks.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.7 no.2
• /
• pp.78-86
• /
• 2002

Abundance, carbon biomass and chlorophyll a concentration of each size-fractionated plankton on the basis of trophical level were investigated in terms of spacial and temporal distribution, and interactions between each biological parameter and environmental factors in Jungmun coastal waters of Jeju Island from July 1999 to June 2000. Heterotrophic picoplankton (HPP) abundance averaged 1.4${\times}$$10^{6}$ cells ${\cdot}$ $ml^{-1}$ at of offshore and 8.3${\times}$$10^{5}$ cells ${\cdot}$ $ml^{-1}$ at inshore, while autotrophic picoplankton (APP) abundance 9.9${\times}$$10^{4}$ cells ${\cdot}$ $ml^{-1}$ at of offshore and 7.1${\times}$$10^{4}$ cells ${\cdot}$ $ml^{-1}$ at inshore. They were more abundant at of offshore than at inshore, and also more abundant than the other areas of Korean waters. On the other hand, heterotrophic and autotrophic nanoplankton (HNP, ANP) were more abundant at inshore than at of offshore. Microplankton (AMP) abundance was affected by diatom (r=0.962, P${\le}$0.001) at inshore and by dinoflagellate (r=0.868, P${\le}$0.001) at of offshore. However correlations between each plankton group in terms of size and trophic level were not significant. Carbon biomass showed as same as the distribution pattern of abundance, but composition percentage of each biomass of plankton group were quite different from that of abundance, representing the highest percentage in ANP. Seasonal fluctuation of chlorophyll a were different according to size class, showing the highest with 0.42 ${\mu}g$CHl-${\alpha}$${\cdot}$$1^{-1}$(57.9%) of APP in March 2000, 1.42 ${\mu}g$CHl-${\alpha}$${\cdot}$$1^{-1}$(74.7%) of ANP in May 2000, and 1.51 ${\mu}g$CHl-${\alpha}$${\cdot}$$1^{-1}$(81.8%) of AMP in July 1999. Correlation between biological parameters and environmental factors by principle component analysis revealed that the first factor as main explanation is the increasing of phosphorus and silica and the increasing of the at both of offshore and inshore. The N:P ratio were 36.4 at inshore and 32.6 at of offshore, showing the lack of phosphorus. Thus we suggest that phosphorus might be a main limiting factor to affect phytoplankton community in the study area.

• Horticultural Science & Technology
• /
• v.32 no.6
• /
• pp.864-871
• /
• 2014

Seed viability is affected by storage conditions and rapid loss of viability in storage is the major cause for low germination. This study was carried out to examine the effect of packaging materials and storage temperature on seed germination rate over 10 years in two species (Capsicum annuum L. and Brassica rapa L. ssp. pekinensis) and determine effective storage conditions for maintaining seed viability. Seeds were packaged in aluminum poly pouches under vacuum, polyethylene bottles, and paper bags containing silica gel and stored under one of two controlled conditions ($15^{\circ}C$, RH 40% or $5^{\circ}C$, RH 30%) or at ambient condition. Seed germination was recorded at 6-month intervals for 10 years. The seeds of both species showed no decline in viability until 6.5 years at 15 or $5^{\circ}C$, irrespective of packaging materials. However, under ambient conditions, the seeds of chili pepper and Chinese cabbage in paper bags lost viability after 4 and 5 years, respectively. By contrast, seeds of both species in vacuum-aluminum poly pouches exhibited a 99% germination rate after 6 years under ambient conditions. Pepper seeds in the vacuum-aluminum poly pouches maintained a 93% germination rate after 10 years in ambient conditions. These results indicated that a special seed storage facility for maintaining viability of chili pepper and Chinese cabbage seed might not be essential and seed testing would not be necessary for 10 years, if chili pepper and Chinese cabbage seeds were packed in ambient/vacuum-aluminum poly pouches or $5^{\circ}C$/vacuum-aluminum poly pouches.

• Journal of Life Science
• /
• v.14 no.1
• /
• pp.1-7
• /
• 2004

The root of Stnchys Sieboldif MIQ was extracted three times with methanol and extract was found to contain 3.02% of polyphenols and 1.97% of flavonoids. DPPH radical scavenging method, ferric thiocyanate method, and nitrite scavenging ability method were employed to investigate the constituents of the extract and to measure their activity on antioxidation. The fraction extracted by ethylacetate showed higher anti oxidation value than that of $\alpha-tocopherol$, butylated hydroxyanisole (BHA), and butylated hydroxytoluene (BHT) at the same concentration. UV-VIS spectral data of the extract by ethylacetate that was isolated on a silica gel column proved adsorption maxima in the range of 280∼330 nm. The fraction ES-RS that has $\lambda_{max}(nm)$ of band 1, 325nm and band II, 289nm exhibitd the strongest activity on antioxidation. ES-R5 fraction showed similar pattern to flavones by the analysis of UV-VIS spectral data.