• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.164.1-164.1
• /
• 2011

Previously, many researchers assessed nearshore wave energy in two ways. The first is a simulation with respect to the offshore wave time series to validate the wave buoy data and the wave model results, and the other is to simulate the representative waves of typical seasonal wave conditions. The former requires enormous computational time and effort. The latter yields inspection on the patterns for the spatial and temporal distribution of nearshore wave energy but tends to underestimates the amount of wave energy in the nearshore region owing to the correlation between the significant wave height and wave period. $\ddot{O}$zger et al. (2004) derived the stochastic wave energy formulation by introducing a correction factor explicitly in terms of the covariance of the wave energy and significant wave height. In this study, a correction factor was applied for the assessment of nearshore wave energy obtained by numerical simulation of wave transformation with respect to representative waves.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.6
• /
• pp.2329-2341
• /
• 2013

In this study, we develop an algorithm to predict swell-like significant waves in the east coast of Korea using the directional wave gauge which is installed near Sokcho. Using the numerical wave model SWAN, we estimate wave data in open sea from the wave data observed through the directional wave gauge. Then, using the wave ray method with the open-sea wave data as offshore boundary conditions, we predict the swell-like significant waves at several points in the east coast of Korea. We verify the prediction methods with the SWAN and wave ray methods by comparing numerically predicted data against either target or measured data at the observation site. We can improve the prediction of the swell-like significant waves in the east sea of Korea using both the real-time wave measurement system and the present prediction algorithm.

• Journal of Coastal Disaster Prevention
• /
• v.4 no.4
• /
• pp.189-196
• /
• 2017

Ocean Research Stations (ORSs) is the ocean platform type observation towers and measured oceanic, atmospheric and environmental data. These station located on the offshore area far from the coast, so they can produce the data without land effect. This study focused to improve the wave data quality of ORS station. The wave observations at ORSs are used by the C-band (5.8 GHz, 5.17 cm) MIROS Wave and Current Radar (MWR). MWR is convenient to maintenance and produce reliability wave data under bad weather conditions. MWR measured significant wave height, peak wave period, peak wave direction and 2D wave spectrum, so it's can provide wave information for researchers and engineers. In order to improve the reliability of MWR wave data, Datawell Waverider Buoy was installed near the one ORS (Socheoncho station) during 7 months and validate the wave data of MWR. This study found that the wave radar tend to be overestimate the low wave height under wind condition. Firstly, this study carried out the wave Quality Control (QC) using wind data, however the quality of wave data was limited. So, this study applied the four filters (Correlation Check, Direction Filter, Reduce White Noise and Phillips Check) of MWR operating software and find that the filters effectively improve the wave data quality. After applying 3 effective filters in combination, the RMSE of significant wave height decreased from 0.81m to 0.23m, by 0.58m and Correlation increased from 0.66 to 0.96, by 0.32, so the reliability of MWR significant wave height was significantly improved.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.27 no.4
• /
• pp.274-279
• /
• 2015

Wave data acquired over eleven years near Sokcho Harbor located in the central area of the east coast were analyzed using spectral method and wave-by-wave analysis method and its major wave characteristics were examined. Significant wave heights were found to be high in winter and low in summer, and peak periods were also found to be long in winter and short in summer. The maximum significant wave height observed was 8.95 m caused by the East Sea twister. The distributional pattern of the significant wave heights and peak periods were both fitted better by Kernel distribution function than by Generalized Gamma distribution function and Generalized Extreme Value distribution function. The wave data were compiled to subdivide the wave height into intervals for each month, and the cumulative occurrence rates of wave heights were calculated to be utilized for the design and construction works in nearby construction works.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.29 no.1
• /
• pp.36-45
• /
• 2017

In the present study, the storm waves at the Korean Straits of April, 2016 have been reproduced by the wave hindcasting, and then their characteristics were investigated. Before the wave hindcasting, the wave measurements at the Korean Straits were analyzed. The analysis showed that the waves at the Korean Straits were dominated by the Northeastern waves, same as those in the East Sea. Accordingly, the wave hindcasting was been carried out with the same condition in Ahn et al. (2016). In the numerical results, the maximum significant wave height at the Korean Straits was 5.06 m, and the corresponding significant wave period was 9.2 s. The computed significant wave heights and wave periods were overestimated by 4 cm and 0.8 s, respectively. After the wave hindcasting, the computed significant wave heights and peak periods were compared with the JONSWAP relationship. This comparison showed that the storm waves at the Korean Straits were close to wind waves, not swell.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1999.10a
• /
• pp.235-242
• /
• 1999

Wave which propagate from the offshore cause transformation of diffraction, refraction, and reflection etc. in coming in the coastal by depth change. Especially, Wave strongly show the charcateristics of rancom wave in the coastal zone. Developed wave model until a recent date analysed regular waves with height and period equal to those of the significant wave, In case of Monochromatic wave, it can be analysed fine in the offshore, but differ from in coastal zone. In this study, form of governing equation is parabolic mild slope equation. This model calculated random wave for using frequency spectrum and directional spectrum from input data condition of wave. This model is applied to Vincent shoal and compared with laboratory experimental data. The results agreed well with laboratory data.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.27 no.2
• /
• pp.142-147
• /
• 2015

Wave data acquired over seven years near Daejin Harbor located in the north central area of the east coast was analyzed using spectral method and wave-by-wave analysis method and its major wave characteristics were examined. Significant wave heights were found to be high in winter and low in summer, and peak periods were also found to be long in winter and short in summer. The maximum significant wave height observed was 6.59 m and was caused by Typhoon No. 1216, SANBA. The distributional pattern of the significant wave heights and peak periods were both reproduced better by Kernel distribution function than by Generalized Gamma distribution function and Generalized Extreme Value distribution function. Meanwhile, the wave data was subdivided by month and wave height level and the cumulative appearance rate was proposed to aid designing and constructing works in nearby coastal areas.

• Restorative Dentistry and Endodontics
• /
• v.44 no.2
• /
• pp.22.1-22.8
• /
• 2019

Objectives: The aim of this study was to investigate the effect of glide path preparation with PathFile and ProGlider nickel-titanium (NiTi) files on the cyclic fatigue resistance of WaveOne NiTi files. Materials and Methods: Forty-four WaveOne Primary files were used and divided into four groups (n = 11). In the first group (0 WaveOne), the WaveOne Primary files served as a control group and were not used on acrylic blocks. In the 1 WaveOne Group, acrylic blocks were prepared using only WaveOne Primary files, and in the PF+WaveOne group and PG+WaveOne groups, acrylic blocks were first prepared with PathFile or ProGlider NiTi files, respectively, followed by the use of WaveOne Primary files. All the WaveOne Primary files were then subjected to cyclic fatigue testing. The number of cycles to failure was calculated and the data were statistically analyzed using one-way analysis of variance (ANOVA) and the Tukey honest significant difference multiple-comparison test at a 5% significance level. Results: The highest number of cycles to failure was found in the control group, and the lowest numbers were found in the 1 WaveOne group and the PF+WaveOne group. Significant differences were found among the 1 WaveOne, PF+WaveOne, and control groups (p < 0.05). No statistically significant differences were found between the PG+WaveOne group and the other three groups (p > 0.05). Conclusion: Glide path preparation with NiTi rotary files did not affect the cyclic fatigue resistance of WaveOne Primary files used on acrylic blocks.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.337-340
• /
• 2002

Monitoring of wave height is important primarily to reduce storm risks at sea and along the coast. Wave heights in recent years have increased 50% for the last 40 years, thus requiring intensive monitoring. Satellite altimetry offers a powerful tool for regular and extensive monitoring of the wave height. We extracted significant wave height (SWH) using several altimeter missions from 1987-1995 over the Northwest Pacific and compared with ECMWF reanalysis (ERA) products. For large wave heights > 2.5 m, the ERA wave heights are smaller than the altimetric ones, while for small wave heights the ERA wave heights are larger. Comparison in SWH between altimetric derivations and ERA model products shows the discrepancy of 0.46-0.21$\times$SWH(m).

• Journal of information and communication convergence engineering
• /
• v.6 no.2
• /
• pp.146-149
• /
• 2008

Simulation and signal conditioning on the time domain surface elevation records are conducted to verify the proposed Welch's method in non-directional ocean wave spectrum analysis. These spectrum data are further conditioned to provide wave characteristic that better describe the sea states. Comparison of significant wave height and zero crossing period between the proposed method and a reference toolkit are presented.