• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.799-804
• /
• 2004

Dynamic characteristic of CD/DVD deck for vehicle is analyzed in this paper. Generally CD/DVD deck for vehicle is used from inferior environment with the vibration of the vehicle and shock of outside and so on. Therefore it must have the structure which is stabilized from the vibration to prevent read error. For this purpose, vibration characteristic of the deck for vehicle should be identified. To analyze characteristic of the deck system, we perform the signal analysis and modal testing using the FFT analyzer. Also we change the design factor degrading the performance of the deck system and verify the efficiency improvement using the acceleration measurement occurring to the sound discontinuation.

• 대한기계학회논문집A
• /
• 제29권7호
• /
• pp.1035-1041
• /
• 2005

Dynamic characteristics of CD/DVD deck fur vehicle are analyzed in this paper. Generally CD/DVD deck for vehicle is used from inferior environment with the vibration of the vehicle, shock of outside and so on. Therefore it must have the structure which is stabilized from the vibration to prevent read error. For this purpose, vibration characteristic of the deck for vehicle should be identified. To analyze characteristic of the deck system, we perform the signal analysis and modal testing using the EFT analyzer. Also we change the design factor degrading the performance of the deck system and verify the efficiency improvement using the acceleration measurement occurring to the sound discontinuation.

• 전자공학회논문지 IE
• /
• 제47권4호
• /
• pp.18-27
• /
• 2010

본 논문은 회전체의 진동 데이터를 효율적으로 획득하기 위해 데이터 획득 시스템을 설계하였다. 데이터획득 장치는 필터와 증폭기로 구성한 아날로그 로직과 ADC와 DSP, FPGA, FIFO 메모리를 갖고 있는 디지털로직으로 구성하였다. 센서로부터 회전체의 진동신호는 아날로그 로직을 통과하여 FPGA에 의해 제어되고, 그 신호는 ADC를 통해 변환되고 FIFO 메모리에 저장하였다. 디지털 선호 처리는 FPGA 제어어의해서 FIFO 메모리에 들어온 데이터를 이용하여 DPS에서 신호처리를 수행할 수 있도록 구성하였다. 회전체 진동을 진단 및 분석하기 위한 진동 요소는 데이터 선호로서 실수 변환, Peak to Peak, 평균 값 산출, GAP, 디지털 필터, FFT 둥을 DSP에서 처리하고 설정된 이벤트를 추적하며, 그 결과 값을 도출하여 조기 경보 구축하였다 묘든 신호처리 과정 및 이벤트 추적은 여러 분석 단계 의해서 처리 시간이 소요되며, 특정 이벤트에 따라 처리 소요 시간에도 변동이 발생한다. 데이터 획득 및 처리는 연속적으로 실시간 분석을 수행해야 하지만, DSP에서는 입력된 신호를 처리하는 동안에 입력된 이후의 데이터에서 다음 입력처리 시간동안 획득한 데이터는 처리 될 수 없고, 특히 다수의 채널에서는 더 많은 데이터 손실이 일어날 수 있다. 따라서 본 논문에서는 데이터 손실이 적고 빠른 처리를 위하여 DPS와 FPGA을 효과적인 사용하였고, 이러한 여러 분석 단계 신호처리에서 발생되는 시간을 최소한으로 줄일 수 있는 방법으로 DSP에서 처리되는 신호단계 중 일부를 FPGA에서 처리할 수 있도록 설계 하였고 그리고 단일의 신호 처리에 의해 수행되는 분석 단계를 병렬 처리로 데이터를 실시간으로 처리하였다. 그 결과로 DSP 만으로 구성된 신호처리 보다 DSP와 FPGA로 구성된 시스템이 훨씬 빠르고 안정된 신호 처리 방법을 제시하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 춘계학술대회 논문집
• /
• pp.495-499
• /
• 2014

In this study, the finite element modeling for the signal cable and pneumatic hose of the industrial robot is developed. The modulus of elasticity of signal cable and pneumatic hose is predicted by deflection test. Finite element model for the signal cable and pneumatic hose is developed by using the modulus of elasticity obtained from the tests. The developed finite element model is estimated through the vibration analysis. This study shows that the developed finite element model can be effectively utilized in the dynamic analysis.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.253-256
• /
• 1997

In this study, we developed a portable device which monitors and analyzes a vibration signal happened to machines. This device is based on PDA which is smaller thant a palm of the hand, but it has powerful computing ability as much s a computer with 100MHz CPU and an operating system called Windows CE. As a preprocess for a diagnosis of a rotating machine, training artificial neural network based on PC is performed, and the device will diagnose the condition of a rotating machine using weight values as a result of the training ANN.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1998년도 춘계학술대회논문집; 용평리조트 타워콘도, 21-22 May 1998
• /
• pp.267-272
• /
• 1998

A new signal processing technique, the directional harmonic wavelet map(dHWM), is presented to characterize the instantaneous planar motion of a measurement point in a structure from its transient complex-valued vibration signal. It is proven that the auto-dHWM essentially tracks the shape and directivity of the instantaneous planar motion, whereas the phase of the cross-dHWM indicates its inclination angle. Finally, the technique is successfully applied to an automobile engine for characterization of its transient motion during crank-on/idline/engine-off.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.721-726
• /
• 2008

Community Noise has been great concerned in public. A road traffic noise has affected too much damage on quiet living environment. In this paper, About measured from the measure point noise and the noise signal processing techniques applied to the occurrence of the noise source with a path to reach this measure point to the measured data to determine signal processor for Complex Cepstrum Analysis of how to apply for research.

• 한국소음진동공학회논문집
• /
• 제26권4호
• /
• pp.469-474
• /
• 2016

Abnormal sound was heard from a heat exchanger of condensate water system in a nuclear power plant, which was identified as impact sound of a loose part later. Nuclear power plants are normally equipped with loose part monitoring system for primary water system, but not for secondary water system. The abnormal sound was analyzed by using the impact signal-processing methodology based on the Hertz theory. The predicted results for impact location and size of the loose part showed good agreement with those of the actual loose part found during the overhaul period in the plant. So, this analysis methodology for the impact signal will be widely utilized for the primary and secondary side of the nuclear power plant.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.1306-1311
• /
• 2006

The root cause of abnormal sound from a heat exchanger of condensate water system in a nuclear power plant is investigated by using the impact signal-processing methodology based on the Hertz theory. The predicted results for the location of impact force and the loose part size meet good agreement with the identified materials during the overhaul period in the plant. Nuclear power plants have experienced several loose parts and the frequency of the loose part will be increased along the aging of the plants. So, this analysis methodology for the impact signal will be widely utilized for the primary and secondary side of the nuclear power plant.

• 산업기술연구
• /
• 제24권A호
• /
• pp.67-73
• /
• 2004

The purpose of this study is to analyze the vibration signal of the revolution machine using the STFT(Short Time Fourier Transform). It is common to analyze the frequency of signal through FFT algorithm with the fixed sampling rate. However, in this situation the order spectrum information useful rather than the general frequency information with the fixed sampling rate. In this paper, the resampling technique was used for getting the information of order spectrum. In resampling process, the arithmetic amount and MSE(Mean Square Error) for various kinds of the signal interpolation was compared and presented the propriety of the interpolation method while developing analysis equipment. Order tracking was implemented using signal interpolation method which it has selected. Then the analyzed results were obtained through simulation using the STFT technique.