• Journal of Electrical Engineering and Technology
• /
• 제13권1호
• /
• pp.97-104
• /
• 2018

This paper proposes supplementary control of conventional coordinated control of a power plant which directly affects network frequency. The supplementary control with dynamic matrix control is applied for 1000 MW power plant with ultra-supercritical (USC) once-through boiler. The supplementary control signal is added to the boiler feedforward signal in the existing coordinated control logic. Therefore, it is a very practical structure that can maintain the existing multi-loop control system. This supplementary controller uses the step response model for the power plant system, and on-line optimization is performed at every sampling step. The simulation results demonstrate the effectiveness of the proposed supplementary control in a wide operating range of a practical 1000 MW USC power plant simulator. These results can contribute the stable operation of power system frequency.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국내학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.722-724
• /
• 1988

In this study, 8 ch. FECG signal storage system with general cassette recorder and amplifier is developed, and simulated LMS algorithm. In future we construct real time FECG monitor system that is used digital signal processor.

• Journal of Advanced Marine Engineering and Technology
• /
• 제29권3호
• /
• pp.251-259
• /
• 2005

A discrete time model reference adaptive control has been applied in order to compensate the nonlinear friction characteristics in a hydraulic proportional position control system. As nonlinear friction, static and coulomb friction forces are considered and modeled as dead zone and external disturbance respectively. The model reference adaptive control system consists of a cascade combination of the dead zone. external disturbance and linear dynamic block. For adaptive control experiment. the DSP(Digital Signal Processor) board has been interfaced the hydraulic proportional position control system. The experimental results show that the MRAC(Model Reference Adaptive Control) for compensation of static and coulomb friction are very effective.

• 대한교통학회지
• /
• 제29권4호
• /
• pp.113-123
• /
• 2011

최근에 활발히 진행된 ITS사업과 신호개선사업으로 인해 신호제어 시스템의 온라인화와 실시간 신호제어시스템이 도입되어 교통신호제어기의 첨단화가 진행되었다. 하지만 실시간 신호제어 운영변수 산정의 기초가 되고, 현재 가장 일반적으로 이용되는 신호교차로의 제어방법으로 사용되는 TOD제어의 운영을 위한 효과적인 신호시간계획을 위한 방법론이 부재되어 왔다. TOD 시간계획의 최적화를 수행하는 과정은 신호교차로의 효율성 제고를 위해 매우 중요한 작업이며, 최적화 수행과정의 정립이 필요한 실정이다. 본 연구에서는 TOD 시간계획 작성 시 가장 선행되어야 할 Sub Area 결정 방법과 첨두시와 비첨두시의 시간 경계를 결정하는 방법론에 대해서 정의하고, 각 방법론에 의해 결정된 시간경계 구간의 신호제어 변수를 신호최적화 모형을 통해 산출하였다. 최적화된 신호제어 변수의 효과를 분석하기 위해 서울시의 동2로 간선도로 구간에 새로운 TOD 시간계획을 적용하고 필드테스트를 수행하였으며, 이러한 TOD 시간계획의 적용 효과를 사전/사후 분석을 통해 검증하였다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 추계학술대회(한국공작기계학회)
• /
• pp.68-74
• /
• 2001

This system is composed of fine and coarse apparatus, measurement system and control system. Piezoelectric actuator is designed for fine positioning. We make a study of precision apparatus that is used in the various industrial machine. The study was carried out to develope a precision positioning apparatus, consisting of servo motor and piezoelectric actuator. Coarse positioning using lead screw is drived by servo motor. Control system output a signal from laser interferometer to amplifier of servo motor and piezoelectric actuator after digital signal processing(DSP). Resolution of this apparatus measure with laser interferometer. In this study, design method and control system with ultra precision position apparatus are researched. As the first step, we have estimated for control performance and system stability before an actual apparatus is manufactured by MATLAB with SIMULINK including various functions those are composed of pre-design and system modeling.

• 한국공작기계학회논문집
• /
• 제11권1호
• /
• pp.17-25
• /
• 2002

This system is composed of fine and coarse apparatus, measurement system and control system. Piezoelectric actuator is designed far fee positioning. We make a study of precision apparatus that is used in the various industrial machine. The study was carried out to develope a precision positioning apparatus, consisting of servo motor and piezoelectric actuator Coarse positioning using lead screw is thrived by servo motor. Control system output a signal from laser interferometer to amplifier of servo motor and piezoelectric actuator after digital signal processing (DSP). Resolution of this apparatus measure with laser interferometer. In this study, design method and control system with ultra precision position apparatus are researched. As the first step, we have estimated for control performance and system stability before an actual apparatus is manufactured by MATLAB with SIMUUNK including various frictions those are composed of pre-design and system modeling.

• Journal of Advanced Marine Engineering and Technology
• /
• 제3권1호
• /
• pp.19-31
• /
• 1979

Recently the adaptive control system, which keeps the control system always optimal by adjusting the control parameters automatically according to the variations of the plant parameters, have become very important in the field of control engineering. The adaptive control systems are usally composed of the plant identification, the decision of the optimal control parameters, and the adjustment of the control parameters. This paper deals with a method of the adaptive control system when PI or PID controller is used in the feed back control system. Its controlled object (the plant) is assumed to be described by the transfer function of $\frac{ke^{-LS}}{1+TS}$ where k, T and L are steady state gain, time constant and pure dead time respectively, and their values are variable in accordance with the change of environmental circumstance. It has been known that a pseudo-random binary signal is quite effective for the measurement of an impulse response of a plant. In adaptive control systems, however, the impulse response itself is not appropriate to determine the control parameters. In this paper, the authors propose a method to estimate directly the parameters of the plant k, T and L by means of the correlation technique using 3 level M-sequence signal as a test signal. The authors also propose a method to determine the optimal parameters of the PI or PID controller in the sense of minimizing the square integral of the control error in the feed back control system, and the values of the optimal parameters are computed numerically for various values of T and L, and the results are examined and compared with those of the conventional methods. Finally the above-mentioned two methods are combined and an algorithm to struct an adaptive control system is suggested. The experiments for the indicial responses by means of both the model of the temperature control system using SCR actuater and the analog simulations have shown good results as expected, and the effectiveness of the proposed method is verified. The M-sequence generator and the time delay circuit, which are manufactured for the experiments, are operated in quite a good condition.

• 융합신호처리학회논문지
• /
• 제5권2호
• /
• pp.138-142
• /
• 2004

본 논문은 모델추종 제어을 위한 PID제어기법을 제안한다. 이산시간영역에서 제어성능을 개선하기 위해 제안하였고, PID 제어계에 새로운 전치 보상기를 삽입하여 모델추종제어계가 되도록 하였다. 외란이나 부하변동에 의해서 계의 응답이 변할 때 PID 제어기의 이득을 재조정할 필요가 있다. PID 제어계에서 각 PID 이득이 제어계의 성능을 크게 좌우하게 되므로 신경망을 PID제어기에 결합하여 제어계의 성능을 향상시켰고 제안한 제어계에서 PID제어기의 이득은 역전파 알고리즘에 의해 자동적으로 조정되어지도록 하였다. 모델추종 제어계의 제어성능을 확인하기 위하여 제어대상을 직류 서보 전동기의 각 위치로 하였다. 이것을 위치 제어계에 적용하여 실험을 통해 그 성능을 증명하였다.

• 전기전자학회논문지
• /
• 제22권1호
• /
• pp.143-148
• /
• 2018

본 논문에서는 자동으로 차량의 방향지시등 점멸 기능을 제어할 수 있는 새로운 방식의 방향지시등 제어 시스템을 제안한다. 차량의 진행 방향에 대한 운동 모멘텀을 인식하기 위한 모션 인식 센서를 채용하여, 제안된 방식의 ADAS 시스템은 차선 변경시 운전자가 방향지시등 레버를 조작하지 않을 경우에 차량의 진행 방향을 감지하여 자동으로 방향지시등의 점멸을 제어하도록 개입할 수 있다. 제안된 제어 시스템은 오토바이 실차에 장착되어 운전자의 안전을 위한 운전자 지원 시스템(ADAS) 으로서의 기능을 확인하였다.

• 한국시뮬레이션학회논문지
• /
• 제14권3호
• /
• pp.79-90
• /
• 2005

There are plenty of optimization models for the signal-system of a single intersection and area traffic. Some of those models are adopted for the real traffic signal control system. The simulators for a single crossroad have been developed, so that we could evaluate optimization models and traffic control systems. However, the simulators for the area traffic are still being developed. Therefore, there are many limitations in the analysis and evaluation for area traffic control system. The area traffic is consisted of several intersections which are very complicated and many traffic strategies are adopted for the control system. This paper features an effective area traffic control system based on the High Lever Architecture(HLA). In this paper, we discuss the design of HLA-based area traffic control simulation. We describe technical motivations for the HLA, the key elements of the architecture and how they are minimum and essential to the goal of reuse and interoperability. A distributed simulation with HLA/RTI provides stable and satisfactory experimental results. Moreover, the prototype traffic control system provides reliable accomplishment compared to the NETSIM and TRANSYT-7F models.