• 전기학회논문지
• /
• 제63권3호
• /
• pp.409-413
• /
• 2014

GIS partial discharge that occurred in the UHF band signal is effectively detected by the method to IEC60270 5pc the apparent minimum discharge can be detected over the GIS arrangement of the sensor interior and exterior of the UHF in accordance with the optimized position signal by considering the damping ratio is selected so that the signals can be obtained to be mounted. 362kV, 800kV GIS is installed on the internal and external sensors are UHF band signal attenuation is set by measuring the reference value, but the operation, 170kV case 362kV, 800kV on the basis of the measurement data and to be installed and operated. When 170kV per 1Bay by installing the built-in sensor 1 for detecting a partial discharge signal, But, GIS signal attenuation is large in the case of an internal partial discharge signal is not detected in some cases. Where the attenuation is great UHF signal of the sensor by increasing the quantity of partial discharge signals were acquired to allow relocation. The greater the spacing between the sensor and the sensor is applied simplifies the installation and reduces the cost in terms of maintenance of appropriate optimal position is calculated to detect the partial discharge signal is needed. Thus 170kV GIS signal power attenuation of a partial discharge by measuring the UHF sensor, and by relocating the proper position is calculated in accordance with the sensor signal decay rate and minimize the error of omission in detecting a partial discharge signal was optimized.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 하계종합학술대회논문집
• /
• pp.34-37
• /
• 1998

Signal Attenuation in the design of satellite channel is due mostly to rain. In this paper, the rain rate characteristics based on the recent year(1994-1996) data for Changwon-Masan were approximated to Moupfouma distribution, and the parameters of distribution were calculated from a simple conversion method of 1-h rate to 1-min rain rate data. From rain rate characteristics, the rain attenuation was estimated and compared with CCR model, Global model and SAM model.

• Journal of electromagnetic engineering and science
• /
• 제5권4호
• /
• pp.189-192
• /
• 2005

The measurement of unique rainfall phenomenon and rain attenuation on 38 GHz terrestrial links at South Korea in 1998 is presented. It was one of the most severe rainfall years at the measured region due to increased EI Nino signal. The rainfall rate exceeded at $0.01\%$ was 97.4 mm/h during a worst month and annual rate was 63.5 mm/h. Experimentally measured results have been compared with some models and found that the rain attenuation by system level was underestimated by the existing prediction models. As it was measured only three months, further study and measurement of rainfall and rain attenuation in this region are needed for stable millimeter-wave system operation at all times.

• Journal of electromagnetic engineering and science
• /
• 제19권1호
• /
• pp.56-63
• /
• 2019

Typical negative group delay circuits (NGDC) are analyzed in terms of signal attenuation, group delay, and bandwidth using S-parameters. By inverting these formulations, we derive and present the design equations (for NGD circuit elements) for a desired specification of the two among the three parameters. The proposed design method is validated through simulation examples for narrow- and wide-band pulse inputs in the time and frequency domains. Moreover, an NGDC composed of lumped elements is fabricated at 1 GHz for measurement. As a function of frequency, the circuit-/EM-simulated and measured group delays are in good agreement. The provided simple NGDC design equations may be useful for many applications that require compensations of some signal delays.

• 한국정보통신학회논문지
• /
• 제3권4호
• /
• pp.779-785
• /
• 1999

위성전송신호는 위성 전송로 상에 강우가 있을 경우 신호감쇠를 겪게된다. 강우에 의한 신호 열화량은 10 GHz 이상의 주파수를 사용한 경우 강수에 의한 감쇠 영향을 받게 되며, 높은 주파수 신호일수록 감쇠 정도가 심각하다. 강우에 의한 신호 열화량은 강우의 세기인 강우강도에 좌우되며, 강우 강도 분포 특성을 추정하기 위해서는 적어도 10년 이상의 장기간 데이터로부터 유도된 분포에 의해 가능하다. 본 논문에서는 창원-마산지역의 강우데이터(88년-97년)로부터, Moupfouma New Model을 이용하여 강우강도의 년 시간율 특성을 도출한 후, ITU-R모델, Global모델, SAM모델을 이용하여 강우감쇠를 예측하고 강우의 영향을 분석하였다.

• 전기학회논문지
• /
• 제65권11호
• /
• pp.1887-1893
• /
• 2016

The VSA(Video Signal Analysis) method is the time-domain approach for estimating ultrasonic attenuation which utilizes the envelop signals from backscattered rf signals. The echogenicity of backscattered ultrasonic signals, however, from deeper depths are distorted when the broadband transmit pulse is used and it degrades the estimation accuracy of attenuation coefficients. We propose the modified VSA method using adaptive bandpass filters according to the centroid shift of echo signals as a pulse propagates. The technique of dual-reference diffraction compensation is also proposed to minimize the estimation errors because the difference of attenuation properties between the reference and sample aggravates the estimation accuracy when the differences are accumulated in deeper depth. The proposed techniques minimize the distortion of relative echogenicity and maximize the signal-to-noise ratio at the given depth. Simulation results for numerical tissue-mimicking phantoms show that the Rectangular-shaped filter with the appropriate center frequency exhibits the best estimation performance and the technique of the dual-reference diffraction compensation dramatically improves accuracy for the region after the beam focus.

• International Journal of Aeronautical and Space Sciences
• /
• 제17권1호
• /
• pp.80-88
• /
• 2016

For next generation global navigation satellite systems, new carrier frequencies in Ku/V band are expected to emerge as a promising alternative to the current frequency windows in L band as they get severely congestive. In the case of higher frequency bands, signal attenuation phenomenon through the atmosphere is significantly different from the L band signal propagation. In this paper, a fundamental investigation is carried out to explore the Ku/V band as a candidate frequency band for a new global satellite navigation carrier signal, wherein specific attention is given to the effects of the dominant attenuation factors through the tropospheric propagation path. For a specific application, a candidate orbit preliminarily designed for the Korean regional satellite navigation system is adapted. Simulation results summarize that the Ku band can provide a promising satellite navigation implementation considering the present satellite's power budget, while the V band still requires technical advances in satellite transceiver system implementations.

• Journal of information and communication convergence engineering
• /
• 제15권3호
• /
• pp.143-150
• /
• 2017

Absorption of microwave radio frequency signal by atmospheric rain is prevalent at frequencies above 10 GHz. This paper presents the studies on rain attenuation at 18 GHz for 3.2 km experimental link between Khumdang (Korea Telecom, KT station) and Icheon (National Radio Research Agency, RRA station). The received signal data for rain attenuation and rain rate were collected at 10 second intervals over a three year periods from 2013 to 2015. Out of several models, the paper present discussion and comparison of ITU-R P.530-16 model, Moupfouma model, Da Silva Mello model along with suitable rain attenuation prediction method. The limitation of research lies on the experimental system that is set up in only one location, however, the preliminary results indicate the application of suitable 1-minute rain attenuation model for specific site. The method provides useful information for microwave engineers and researchers in making decision over the choice of most suitable rain attenuation prediction in terrestrial links.

• 전기학회논문지
• /
• 제60권2호
• /
• pp.446-450
• /
• 2011

Tunable SC(Switched Capacitor) bandpass ${\Sigma}-{\Delta}$(Sigma-Delta) modulator used in wireless system receiver occurs a signal attenuation according to tuning of center frequency in signal bandwidth. In this paper, tunable bandpass 4th order SC bandpass ${\Sigma}-{\Delta}$ modulator with novel structure is proposed for rejection of signal attenuation in signal bandwidth. The existing structure uses a ten variable coefficient values for rejection of signal reduction in the modulator. But the proposed structure only use a two variable coefficient values for rejection of signal attenuation in the modulator. Also, an adder and comparator is replaced with a comparator having 4 inputs in the modulator. Therefore, the existing structure has one more OP-AMP. The purposed modulator was designed in $0.18\;{\mu}m$ CMOS technology. The resolution of the modulator within 310 kHz bandwidth and 40 MHz sampling frequency under 6.67 MHz, 10 MHz and 13.33 MHz intermediate frequency are over 10 bit.

• Journal of electromagnetic engineering and science
• /
• 제15권2호
• /
• pp.76-81
• /
• 2015

This paper presents a design of a transmission line negative group delay (NGD) circuit with multiple pole characteristics. By inserting an additional transmission line into a conventional NGD circuit, the proposed circuit provides further design parameters to obtain wideband group delay (GD) and to help reduce signal attenuation. As a result, the number of gain compensating amplifiers can be reduced, which can contribute to stable operation when integrated into RF systems. The multiple pole characteristics can provide wider NGD bandwidth and can be obtained by connecting resonators with slightly different center frequencies separated by quarter-wavelength transmission lines. For experimental validation, an NGD circuit with two poles GD characteristic is designed, simulated, and measured.