• Journal of the Korean Society of Clothing and Textiles
• /
• v.18 no.2
• /
• pp.263-272
• /
• 1994

The purpose of this study was to identify factors that might distinguish those who have a high level of Intention to purchase each of domestic, foreign designer and national brand jeans from those who have a low intention in terms of evaluative criteria belief, ideal jeans image and clothing altitude. The sample consisted of 198 male and 197 female students from five universities in Seoul. The questionnnaire consisted of 50 seven-point semantic differential scales dealing with evaluative criteria and ideal jeans image, beliefs about and intention to purchase domestic, foreign designer and foreign national brand jeans and 25 Likert type clothing attitude scales. Based on a series of t-tests the results showed that color and design were the most influencing factor among the evaluative criteria belief, regardless of brand type, while durability, accessory, sewing were the least. Sexy image, brand consciousnees and fashion interest were the important factor that distinguish high intention to purchase group fro)m low intention to purchase group.

• Analytical Science and Technology
• /
• v.19 no.3
• /
• pp.263-271
• /
• 2006

The levels of total PCBs, Co-PCBs and PCDD/Fs in the transformer insulation oil samples obtained using GC/ECD and HRGC/HRMS were ranged from N.D. to 77.3 ppm, from 0.0863 to 2.49 ppm and from N.D. to 0.00241 ppm, respectively. In terms of WHO-TEQ values, Co-PCBs and PCDD/Fs were ranged from 23.3 to 600 pgTEQ/g and from N.D. to 128 pgTEQ/g, respectively (${\Sigma}Co$-PCBs+PCDD/Fs concentration was calculated 24.4~728 pgTEQ/g). Although, the contribution of PCDD/Fs was below 12% in total TEQ concentration, it is suggested contamination of PCDD/Fs in transformer insulation oils. Among 10 samples, 4 samples showed higher concentration than 2 ppm (specific waste criterion of Korea) and Aroclor 1242, 1248, 1254 and 1260 was detected in samples as a single or mixture of Aroclor. It was shown reliable relationship between concentration of Co-PCBs and those of PCDD/Fs (p<0.003), however, was not shown between production year of transformer and concentration of PCBs. The distribution pattern of Co-PCB congeners showed that the ratios of mono-ortho substituted congeners were higher than non-ortho substituted congeners. Among that, PCB-118 congener was predominant. In addition, the OCDD congener was predominated in PCDD/Fs congeners as above 53%. Moreover, the congener pattern of Co-PCBs was similar to that of Aroclor as well as ambient air, which suggested that PCBs volatilization from transformer insulation oil affected the pattern of Co-PCBs in ambient air.

• Journal of fish pathology
• /
• v.36 no.2
• /
• pp.263-275
• /
• 2023

Chum salmon (Oncorhynchus keta) is a species which returns to Korea for spawning and was produced as seed production at the Fisheries Resources Agency located in Uljin-gun, Gyeongsangbuk-do to preserve the species. However, farmed chum salmon showed symptoms of bacterial infection. Therefore, in this study, bacteria were isolated to identify the causative agent from chum salmon in October 2021. The isolated bacteria were identified based on the sequences of 16S rDNA, rpoD (RNA polymerase sigma factor σ⁷⁰), and vapA (A-layer) genes. Also, salinity-growth curve, biochemical characterization, antibiotic susceptibility test, and pathogenicity analysis were performed in four strains. As a result, four isolated strains were identified as Aeromonas salmonicida subsp. salmonicida. Additionally, the bacterial strains showed a decrease in growth as the salt concentration increased in the medium. All of the isolated strains exhibited γ-hemolysis, and the same biochemical properties. In the antimicrobial susceptibility test, all strains showed an inhibition zone of 40 to 44 mm for oxolinic acid, flumequine, and florfenicol. Pathogenic factors were assessed by RT-PCR at the mRNA level, and found that the four strains expresses the outer membrane ring of T3SS (ascV), inner membrane ring of T3SS (ascC), vapA, enterotoxin (act), and lipase (lip) genes which are well known to significantly contribute to the pathogenicity of A. salmonicida. The results of this study can be used as basic data to prevent A. salmonicida subsp. salmonicida occurring in sea-chum salmon in the future.

• Communications for Statistical Applications and Methods
• /
• v.18 no.3
• /
• pp.377-389
• /
• 2011

A higher quality level is generally perceived by customers as improved performance by assigning a correspondingly higher satisfaction score. The third generation index $C_{pmk}$ is more powerful than two useful indices $C_p$ and $C_{pk}$ that have been widely used in six sigma industries to assess process performance. In actual manufacturing industries, process capability analysis often entails characterizing or assessing processes or products based on more than one engineering specification or quality characteristic. Since these characteristics are related, it is a risky undertaking to represent the variation of even a univariate characteristic by a single index. Therefore, the desirability of using vector-valued process capability index(PCI) arises quite naturally. In this paper, we consider more powerful vector-valued process capability index $C_{pmk}$ = ($C_{pmkx}$, $C_{pmky}$)$^t$ that consider the univariate process capability index $C_{pmk}$. First, we examine the process capability index $C_{pmk}$ and plug-in estimator $\hat{C}_{pmk}$. In addition, we derive its asymptotic distribution and variance-covariance matrix $V_{pmk}$ for the vector valued process capability index $C_{pmk}$. Under the assumption of bivariate normal distribution, we study asymptotic confidence regions of our vector-valued process capability index $C_{pmk}$ = ($C_{pmkx}$, $C_{pmky}$)$^t$.

• Journal of Aquaculture
• /
• v.19 no.4
• /
• pp.225-230
• /
• 2006

A long-term (26 weeks) feeding experiment was conducted to examine the essentiality and requirement of inositol in diets for olive flounder because no information is available in the species. Five casein-gelatin based semi-purified diets were formulated to contain four different levels of myo-inositol (0, 0+antibiotic, 400, 800, and 1600 mg/kg, designated as M0, M0+, M400, M800, and M1600, respectively). One (M0+) of the control diets contained tetracycline hydrochloride (0.4%, wt/wt) as an antibiotic to inhibit biosynthesis of inositol by micro-organism in intestine of fish. Olive flounder at the early juvenile stage (initial body weight 1.22 g) were randomly distributed into fifteen 35 L tanks (48 fish/tank) and fed with one of the experimental diets (3 replicates per diet). At the end of the feeding trial, the weight gain, feed intake, specific growth rate, and protein efficiency ratio of fish fed diets containing higher levels of myo-inositol (M800 & M1600) were significantly higher than those of fish fed the other diets (P<0.05). Feed conversion ratio, survival, hematocrits, and hemoglobin of fish fed experimental diets were not significantly different among all the fish groups. Whole body compositions of fish were not different except for lipid content. The lipid content was significantly different between M0 and M400 diet groups. These results indicate that juvenile olive flounder requires dietary supplementation of myo-inositol in diets for normal growth and its optimum level seems to be approximately 800 mg myo-inositol/kg diet.

• Journal of Korean Society for Quality Management
• /
• v.33 no.3
• /
• pp.156-160
• /
• 2005

We consider practical experimental design strategies and analysis to find out whether a modified method give better results than the standard method. The most practical design strategy is for experimenter to make r successive runs under the current standard method and then, change the standard method to a modified method to make another r successive runs under a modified method. To test a statistically significant difference between the population mean of the standard method and a modified method, additional recent data for sufficient number of consecutive responses under the standard method is needed to construct external reference distribution(Box, et al., 1968). Upon those informations unavailable, the practical design strategy is to run the experiment by split plot designs. In this paper, two types of split plot designs are proposed and how to determine efficiently the number of repetition within a given method and replication of those two methods are discussed based on results of the level of significance ${\alpha}$= 0.05 and the power being at least 0.9 at the detectable difference of ${\mu}_2-{\mu}_1=1.5{\times}{\sigma}$.

• Journal of Animal Science and Technology
• /
• v.48 no.4
• /
• pp.603-610
• /
• 2006

This study was conducted to investigate the feeding effect of selenium provided by different sources on the physico-chemical properties of M. longissimus thoracis. Twenty Hanwoo steers(20～24 months, approximately 613kg) were assigned to 4 different feeding groups of each five, depending on the sources of selenium such as inorganic selenium(sodium selenite), organic selenium(Yeast, USA Sel-Plex), Se-SMC(Se-spent mushroom compost) and the control(no selenium). The selenium level in feed was 0.9 ppm for all groups except the control. Animals were fed with different feeding treatments for 12 weeks and slaughtered at National Livestock Research Institute. The inorganic selenium group had the highest cooking loss(CL. %) and followed by the Se-SMC group and organic selenium group. No significant differences in chemical composition, WB-shear forces, water-holding capacity(WHC) and sensory properties were found among the groups(P>0.05). There were 40% frequencies of grade A in the inorganic selenium group and followed by the organic selenium group(20%). Se-SMC group had 80% of frequencies for grade 1+ and followed by the inorganic selenium group(40%), whereas the organic selenium group and the control group had the 20% frequencies for grade 1+. From the results of this study showed that the selenium sources did not affect chemical composition, WHC and tenderness of Hanwoo steers. However, the inorganic selenium group had the highest cooking loss(%) and lowest pH when compared to the other groups.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.07b
• /
• pp.265-267
• /
• 2005

DNA 컴퓨팅은 분자 수준(molecular level)에서 연산을 수행한다. 따라서 일반적인 실리콘 기반의 컴퓨터에서와는 달리, 순차적인 연산 제어를 보장하기 어렵다는 특징이 있다. 그러나 DNA 컴퓨팅은 화학반응에 기초한 연산이기 때문에, 실험자가 의도한 연산을 많은 수의 분자에 동시에 적용할 수 있으므로 실리콘 기반의 컴퓨터와는 비교할 수 없는 병렬 연산을 구현할 수 있다. 병렬 연산을 구현하고자 할 때, 일반적으로 연산에 사용하는 모든 DNA 분자들을 대상으로 연산을 구현할 수도 있다. 그러나 전체가 아닌 일부의 분자들을 상대로 연산을 수행하는 것 역시 가능하며 이 때 자연스러운 방법으로 사용할 수 있는 방법이 배깅(Bagging)이나 부스팅(Boosting)과 같은 앙상블(ensemble) 계열의 학습 방법이다. 일반적인 부스팅과 달리 가중치를 부여하는 것이 아니라 특정 학습자(learner)를 나타내는 분자들을 증폭한다면 가중치를 분자의 양으로 표현하는 것이 가능하므로 분자 수준에서 앙상블 계열의 학습을 구현하는 것이 가능하다. 본 논문에서는 앙상블 계열의 학습 방법 중 특히 부스팅의 효과를 DNA 컴퓨팅에 응용하고자 할 때, 어떤 방법이 가능하며, 표현 과정에서 고려해야 할 사항은 어떠한 것들이 있는지 고려하고자 한다. 본 논문에서는 규모를 사전에 한정할 수 없는 진화 가능한 그래프 구조(evolutionary graph structure)를 학습할 수 있는 방법을 찾아보고자 한다. 진화 가능한 그래프 구조는 기존의 DNA 컴퓨팅 방법으로는 학습할 수 없는 문제이다. 그러나 조합 가능한 수를 사전에 정의할 수 없기 때문에 분자의 수에 상관없이 동일한 연산 시간에 문제를 해결할 수 있는 DNA 컴퓨팅의 장정을 가장 잘 발휘할 수 있는 문제이기도 하다.개별 태스크의 특성에 따른 성능 조절과 태스크의 변화에 따른 빠른 반응을 자랑으로 한다. 본 논문에선 TIB 알고리즘을 리눅스 커널에 구현하여 성능을 평가하였고 그 결과 리눅스에서 사용되는 기존 인터벌 기반의 알고리즘들에 비해 좋은 전력 절감 효과를 얻을 수 있었다.과는 한식 외식업체들이 고객들의 재구매 의도를 높이기 위해서는 한식 외식업체의 서비스요인, 식음료요인, 이벤트 요인 등을 강화함으로써 전반적인 종사원 서비스 품질과 식음료품질을 높이는 전략을 취해야 한다는 것을 시사해주고 있다. 본 연구는 대구 경북소재 한식 외식업체만을 대상으로 하여 연구를 실시하여 연구의 일반화와 한식 외식업체를 이용하는 이용 고객들이 한식 외식업체를 재방문하는 재구매 의도가 발생하는데 있어 발생하는 과정을 설명하는 종단적 연구를 실시하지 못한 한계점을 가지고 있다.아직 산업 디자인이 품질경쟁력에 크게 영향을 미치는 성숙단계에 이르지 못하였음을 의미한다. (2) 제품 디자인에게 영향을 끼치는 유의적인 변수는 연구개발력, 연구개발투자 수준, 혁신활동 수준(5S, TPM, 6Sigma 운동, QC 등)이며, 제품 디자인은 우선 품질경쟁력을 높여 간접적으로 고객만족과 고객 충성을 유발하는 것으로 추정되었다. 상기의 분석결과로부터, 본 연구는 다음과 같은 정책적 함의를 도출하였다. 첫째, 신상품 개발과 혁신을 위한 포괄적인 연구개발 프로젝트를 품질 경쟁력의 주요 결정요인(제품의 기본성능, 신뢰성, 수명(내구성) 및 제품 디자인)과 연계하여 추진해야 할 것이다. 둘째, 기업은 디자인 경영 마인드 제고와 디자인 전문인력 양성을, 대학은 디자인 현장 업무를 통하여 창의력 증진과 기획 및 마케팅 능력 교육을, 정부는 디자인 기술개발 및 디자인 교육지원의 강화를 통하여 각각 디자인 경쟁력$\righta

• Journal of Nutrition and Health
• /
• v.33 no.1
• /
• pp.13-22
• /
• 2000

Effects of high fat diet and/or endurance exercise training on hepatic total and phospholipid(PL) fatty acid compositions were evaluated in rats fed one of the following diets for 31 days. control diet(CD, 5 wt% corn oil) or high fat diet(HFD, 35 wt% corn oil). Half of the rats in each group were exercise-trained regularly on a treadmill for 90 minutes/day during the entire feeding period. Total and PL fatty acid compositions of hepatic lipid extracts were determined by a gas-liquid chromatograph),. Endurance exercise training did not change the daily food intake, but significantly reduced body weight gain and feed efficiency ratio of rats, which were most prominent in animals fed HFD. Exercise training did not significantly change the percentages of ∑saturated fatty acids (SFA) and ∑polyunsaturated fatty acids(PUEA), but decreased the percentage of ∑monounsaturated fatty acids(MUFA) in hepatic total fatty acids, which might be associated with the decrease in (equation omitted) 9-desaturation index of hepatic total fatty acid metabolism. Exercise training significantly lowered the percentages of 16 : 0 and 22 : 5$\omega$3, and increased the percentages of 20 : 1 and 20 : 3$\omega$3 in both total and PL fatty acid compositions in rat liver. Both total fatty acid and PL fatty acid compositions of rat liver responded more sensitively to changes in dietary fat content than to endurance exercise training in this study. Feeding HFD, whoch contains high level of linoleic acid(LA, 18 : 2$\omega$6), significantly decreased the percentages of ∑SFA and $\Sigma$MUFA, and increased the percentages of ∑PUFA and ∑$\omega$6 fatty acids of hepatic total fatty acids. Hepatic total fatty acid composition was affected by dietary fat content and dietary fatty acid composition more sensitively than those found in hepatic PL fatty acid composition. HFD significantly decreased most of desaturation indices, while exercise training significantly decreased elongation index(20 : 5$\omega$3⇒22 : 5$\omega$3) of hepatic total and PL fatty acid metabolism in rats. (Korean J Nutrition 33(1) : 13-22, 2000)

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.6C
• /
• pp.251-258
• /
• 2011

Steel pipe piles have been used as various deep foundation materials for a long time. Recent increase in steel material cost has made engineers reluctant in using it even with its good quality and ease of construction. Therefore when constructing with steel pipe pile, the decision to reuse the excessive pile length that is cut off from the designed pile head elevation after pile driving can be cost saving. This has caused many constructors to reuse the pile leftovers with new piles, but the absence of quantitative structural capacity behaviors of steel pipe pile after pile driving or appropriate countermeasures and standards in reusing steel pipe pile has resulted in wrong applications, pile structural integrity problems, inappropriate limitation of reusable pile length, etc. The structural performance analysis between a new pile and a pile that has undergone working state and ultimate state stress level during pile driving was performed in this research by means of comparing the results between the dynamic pile load test, tensile load test, charpy energy test and fatigue test for high strength steel of $440N/mm^2$ yield strength. Test results show that under working load conditions the yield strength variation is less than 2% and for ultimate load conditions the variation is less than 5% for maximum total blow count of 3000. The results have been statistically analyzed to check the sensitivity of each factors involved. From the test results, reusability of steel pipe pile lies not in the main pipe yield strength deviation but in the reduction of absorb energy, strength changes and quality control at the welded section, shape deformation and local buckling during pile driving.