• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.2
• /
• pp.164-170
• /
• 2013

The latest vehicle yields a superior safety and reduction of driving burden by monitoring the driving state of vehicle and its environment with various sensors. To detect other vehicles and objects of the rear left and right-side blind spot area of driver, provide the information about a existence of objects inside the blind spot, and give a signal to avoid collision, this study proposes the intelligent outside rear-view mirror system. This study proposes SILS system with PreScan and Matlab/Simulink to verify practical applicability of developed BSDS. PreScan yields realistic driving environments and road conditions and vehicle model dynamics and collision warning is controlled by Matlab/Simulink.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.31 no.11
• /
• pp.904-911
• /
• 2007

A measurement technique fur void fraction has been proposed using a time-resolved two-phase PIV system and the bubble dynamics has been investigated in gas-liquid two-phase flows. For the three-dimensional evaluation of the bubble information, both the images from the front and side views are simultaneously recorded into a high speed CCD camera by reflecting the side view image on a $45^{\circ}$ oriented mirror to be juxtaposed with the front view image. Then, a stereo-matching technique is applied to calculate the void fraction, bubble size and shape. To obtain the rising bubble velocities, the 2-frame PTV method was adopted. The present technique is applied to freely rising bubby flows in stagnant liquid. The results show that the increase of bubble flow rate gives rise to the increase of bubble size and rising velocity at first. If it goes over a certain level, the rising velocity becomes constant and the horizontal velocity grows bigger instead due to the obstruction of other bubbles.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.960-963
• /
• 2007

In this paper, development of the noise barrier analysis program is described. The upper part of barriers may have complicated shapes like "Y", "T", inverted L, and other shapes. The insertion loss of the barrier is predicted by summation of multiple diffractions occurring at top edge points. In addition, the program considers diffractions occurring at both vertical sides, while reflections from ground due to mirror images are also included. In case of two barriers at both sides of the road, reflections from the other side of barriers are considered, in which magnitudes are decreased by the ratio of absorption coefficient.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.4
• /
• pp.93-100
• /
• 1999

확성회의 시스템에서 응용되는 반향신호 제거기는 긴 잔향시간을 갖는 실내 공간의 환경변화에 따라 필터 계수의 갱신에 많은 시간이 요구되어 실시간 처리에 문제점으로 지적되고 있다. 본 논문에서는 연산량 저감을 통한 실시간 처리를 위하여 중첩가산방식의 SSB(Single Side Band) 필터뱅크를 사용한 서브밴드 적응 신호처리법을 제안한다. 이 방법은 입력과 출력의 스펙트럼을 몇 개의 주파수 밴드로 분할하여, 각 밴드를 ES-NLMS(Exponential Step-Normalized Least Mean Square) 알고리즘을 이용하여 적응 처리하는 것이다. 시뮬레이션 결과 중첩가산방식의 SSB 필터뱅크가 풀밴드 보다 ERLE(Echo Return Loss Enhancement)가 1∼2㏈ 정도 작을 때 연산량이 풀밴드 보다 약95%, QMF(Quadrature Mirror Filter)필터뱅크보다 약50% 정도 감소하여 우수한 것으로 나타났다.

• Journal of Korean Neurosurgical Society
• /
• v.48 no.5
• /
• pp.434-437
• /
• 2010

We report a unique case of bilateral mirror image M1 aneurysms, one of which was an unruptured aneurysm arising from the proximal end of right middle cerebral artery fenestration with long loop and the other ruptured aneurysm from the contralateral side. We clipped ruptured aneurysm first and unruptured one in three months after the first operation. The difficulties of identifying this unusual vascular anomaly and possible problems during the surgery of an aneurysm at the site of fenestration are discussed with a review of the literature.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.10 no.1
• /
• pp.13-16
• /
• 2000

Progress in Si crystal and wafer technologies is discussed on single crystal growth, wafer fabrication, epitaxial growth, gettering, 300 mm and SOI. As for bulk crystal growth, the mechanism of grown-in defects (voids) formation, the succes of grown-in defect free crystal growth technology and nitrogen doped crystal are shown. New wafer fabrication technologies such as both-side mirror polishing and etchingless process have been developed. The epitaxial growth of SiGe/Si heterostructure for high speed bipolar device is treated. Gettering technology under low temperature process such as RTP is important, and also it is shown that IG effect for Ni could be predicted using computer simulation of precipitate density and size. The development of 300 mm wafer and SOI has made progress steadily.

• Clinical Pain
• /
• v.18 no.2
• /
• pp.133-137
• /
• 2019

The long-term prognosis of complex regional pain syndrome is difficult to predict because of its unclear pathophysiology. The syndrome can spontaneously spread to other regions in the body. We report a case in which a complex regional pain syndrome that occurred in a 75-year-old male patient after a stroke spread to the opposite side.

• Journal of radiological science and technology
• /
• v.37 no.3
• /
• pp.203-209
• /
• 2014

Usefulness and clinical availability for surgery efficiency were evaluated by conducting pre-operative planning with a model manufactured by desktop 3D printer by using clavicle CT image. The patient-customized clavicle fracture model was manufactured by desktop 3D printer of FDM wire laminated processing method by converting the CT image into STL file in Open Source DICOM Viewer Osirix. Also, the model of the original shape before damaged was restored and manufactured by Mirror technique based on STL file of not fractured clavicle of the other side by using the symmetry feature of the human body. For the model, the position and size, degree of the fracture was equally printed out. Using the clavicle model directly manufactured with low cost and less time in Department of Radiology is considered to be useful because it can reduce secondary damage during surgery and increase surgery efficiency with Minimal invasive percutaneous plate osteosynthesis(MIPO).

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.8
• /
• pp.17-23
• /
• 2008

We have investigated the properties of the novel rectangular ring lasers containing active and passive regions in a InP material system. The rectangular ring laser consists of four low loss total internal reflection mirrors and a directional coupler made out of passive three waveguide. Two different lasers haying active lengths of 250 and $350{\mu}m$ and total cavity lengths of 580 and $780{\mu}m$ are fabricated, respectively. For both devices lasing thresholds of 38 mA is obtained at room temperature and under continuous wave operation. Lasing is predominantly single mode with the side mode suppression ratio better than 20 dB.

• Proceedings of the KIEE Conference
• /
• 2007.11a
• /
• pp.148-149
• /
• 2007

We present the design and fabrication prcoess of a two-axis tilting micromirror device driven by the electrostatic vertical comb actuator. A high aspect-ratio comb actuator is fabricated by multiple DRIE process in order to achieve large scan angle. The proposed fabrication process enables a mirror to be fabricated on the wafer-scale. By bonding a double-side polished (DSP) wafer and a silicon-on-insulator (SOI) wafer together, all actuators on the wafer are completely hidden under the reflectors. Nickel lines are embedded on a Pyrex wafer for the electrical access to numerous electrodes of mirrors. An anodic bonding step is implemented to contact electrical lines with ail electrodes on the wafer at a time. The mechanical angle of a fabricated mirror has been measured to be 1.9 degree and 1.6 degree, respectively, in the two orthogonal axes under driving voltages of 100 V. Also, a $8{\times}8$ array of micromirrors with high fill-factor of 70 % is fabricated by the same fabrication process.