• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.70-70
• /
• 2003

금속용액을 이용하여 측면고상결정화 시킨 다결정 실리콘 박막내의 고각입계를 줄이기 위해 서 고온열처리를 실시하였다. SEM과 TEM을 이용하여 다결정 실리콘내의 바늘모양의 결정립의 폭의 증가를 관찰하였고, 결정 립내의 결함이 감소를 관찰하였다. 그리고 결정화된 다결정 실리콘의 표면 거칠기를 AFM이용하여 퍼니스에서 53$0^{\circ}C$에서 25시간 동안 결정화 시킨 시편과 이후 80$0^{\circ}C$에서 40분간 추가 고온 열처리시킨 시편을 비교한 결과 6.09$\AA$에서 4.22$\AA$으로 개선되었음을 확인할 수 있었다. 박막내의 금속에 의한 오염을 줄이기 위해 금속의 농도를 줄인 금속용액을 결정화에 사용하였다. 이때 저농도 금속용액을 사용하여 측면결정화시킨 다결정 실리콘 박막내의 소각입계를 이루는 결정립군의 크기가 고농도 금속용액을 이용하여 측면결정화시킨 경우보다 증가함을 확인 할 수 있었다. 박막트랜지스터를 제작하여 트랜지스터의 전기적특성을 살펴보았다. 전계이동도가 80$0^{\circ}C$ 고온 열처리에 의해서 53$\textrm{cm}^2$/Vsec 에서 95$\textrm{cm}^2$/Vsec 로 상승하였는데 이는 고온열처리에 의해서 측면결정화된 다결정 실리콘내의 트랩 밀도가 2.2$\times$$10^{12}$/$\textrm{cm}^2$ 에서 1.3$\times$$10^{12}$$\textrm{cm}^2$로 감소하였기 때문이다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.257-258
• /
• 2006

ZnO thin films were prepared by RF magnetron sputter deposition on p-Si(100) wafer with various cooling rates of substrate temperature such as the substrates were pre-heated to $400^{\circ}C$ before the deposition and then cooled down naturally or slowly to $300^{\circ}C$, $200^{\circ}C$, $100^{\circ}C$, and R.T., by the temperature controller during the deposition. The crystall me and micro-structural characteristics of the films were investigated by XRD and SEM ZnO films which cooled down naturally or slowly by temperature controller during deposition, especially the film were deposited with cooling down from $400^{\circ}C$ to $200^{\circ}C$ slowly, showed the most outstanding c-axis preferred orientation.

• Journal of Welding and Joining
• /
• v.31 no.3
• /
• pp.84-88
• /
• 2013

These days embedded technology may be the most significant development in the electronics industry. The study focused on the development of active device embedding using flexible printed circuit in view of process and materials. The authors fabricated 30um thickness Si chip without any crack, chipping defects with a dicing before grinding process. In order to embed chips into flexible PCB, the chip pads on a chip are connected to bonding pad on flexible PCB using an ACF film. After packaging, all sample were tested by the O/S test and carried out the reliability test. All samples passed environmental reliability test. In the future, this technology will be applied to the wearable electronics and flexible display in the variety of electronics product.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.5
• /
• pp.52-59
• /
• 1989

The reliability of the thin thermal oxide was investigated by using constant current stress method. Polysilicon gate MOS capacitors with oxide thickness range of 20-25nm were used in this experiment. Automatic measurement and statistical data analysis which were essential in reliability evaluation of VLSI process preformed by HP 9000 computer. Based on TDDB results, defect density, breakdown charge (Qbd) and lifetime of oxide film were evaluated. According to the polarity of the stress, some different characteristics were shown. Defect density was 62/$cm^2$ at negative gate injection. The value of Qbd was about 30C/$cm^2$ at positive gate injection, and about 21C/$cm^2$ at negative. The current density acceleration factor was 1.43$cm^2$/A for negative gate injection, and 1.25$cm^2$/A for positive gate injection.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.6
• /
• pp.817-820
• /
• 2012

We studied p-type capacitance characteristics of ZnO thin-film transistors (TFT's), grown by metal organic chemical vapor deposition (MOCVD). We compared two ZnO TFT's: one grown at $450^{\circ}C$ and the other grown at $350^{\circ}C$. ZnO grown at $450^{\circ}C$ showed smooth capacitance profile with electron density of $1.5{\times}10^{20}cm^{-3}$. In contrast, ZnO grown at $350^{\circ}C$ showed a capacitance jump when gate voltage was changed to negative voltages. Current-voltage characteristics measured in the two samples did not show much difference. We explain that the capacitance jump is related to p-type ZnO layer formed at the $SiO_2$ interface. Current-voltage and capacitance-voltage data support that p-type characteristics are observed only when background electron density is very low.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.795-797
• /
• 2010

습식 식각은 식각용액으로서 화학용액을 사용하는 공정으로 반응물이 기판표면에서 화학반응을 일으켜 표면을 식각하는 과정이며, 표면결합의 제거를 위한 식각연마와 폴리싱을 위한 식각, 그리고 구조적 형상 패턴등이 있다. 여기서 화학용액은 산화제 또는 환원제 역할을 하는 혼합용액으로 구성된다. 습식 식각 시 수${\mu}m$의 해상도를 얻기 위해서는 그 부식액의 조성이나, 에칭시간, 부식액의 온도 등을 고려하여야 한다. 또한 습식 식각 후 포토 레지스트를 제거하는 과정에서 포토 레지스트를 깨끗이 제거해야 하며, 제거공정 자체가 a-Si:H 박막을 부식 하지 않을 조건으로 행하여야 한다. 포토레지스트 제거 후 잔류 포토 레지스트를 제거하기 위해서 본 실험에서는 RCA-I 세척 기법을 사용한 후 D.I 로 린스 하였다. 본 실험에서 사용한 금속은 Cr, Al, ITO 로 모두 DC sputter 방법을 사용해서 증착하여 사용하였다. Cr박막은 $1300\AA$ 정도의 두께를 사용하였고, ITO (Indium Tin Oxide) 박막은 가시광 영역에서 투명하고 (80% 이상의 transmittance), 저저항 (Sheet Resistance : $50{\Omega}/sq$ 이하) 인 박막을 사용하였으며, 신호선으로 주로 사용되는 Al등의 증착조건에 따른 wet etching 특성을 조사하였다.

• Journal of the Korean Vacuum Society
• /
• v.21 no.1
• /
• pp.22-28
• /
• 2012

Transparent dye-sensitized solar cells have been widely investigated for the application to building integrated photovoltaic system. Thin film Si-based solar cells are emerging as a substitute for the dye-sensitized solar cells because their merits of well-established manufacturing processes. Since the selective transmitting layer transmits visible light and reflects infrared light, the solar cell efficiency increases with the introduction of the selective transmitting layer. In this work, AlTiO thin films were grown as the selective transmitting layer by cost-effective sputter deposition and their transmittances were improved by controlling deposition parameters.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.05a
• /
• pp.264-265
• /
• 2009

본 연구에서 유도결합 플라즈마 식각 장치외 $BCl_3/Ar/Cl_2$ 가스 혼합비를 이용하여 ZnO 박막을 식각 하였을 때, 식각 된 ZnO 박막의 표면 반응에 관하여 관찰하였다. ZnO 박막의 식각 실험 조건은 RF 전력 700 W, 직류바이어스 전압 - 150 V, 공정 압력 15 mTorr로 고정하였고, $Cl_2/(Cl_2+BCl_3+Ar)$ 가스 혼합비를 변경하면서 식각 실험을 수행하였다. $Cl_2$ 가스가 3 sccm 일 때, ZnO 박막의 식각속도는 53 nm/min으로 가장 높았으며, 이때 ZnO 박막에 대한 $SiO_2$의 선택비는 0.89 이었다. 식각된 ZnO 박막의 표면은 XRD (X-ray diffraction)와 AFM(atomic force microscopy)를 이용하여 결정상의 변화와 표면의 거칠기를 분석하였다. AFM 분석 결과에서 Ar, $BCl_3$와 $Cl_2$ 플라즈마를 이용하여 식각된 시료의 표면 거칠기 근 값이 식각전의 시료나 $BCl_3/Ar/Cl_2$ 플라즈마로 식각된 시료보다 큰 것을 확인하였다. 이는 식각된 시료에서의 Zn 양의 감소나 비휘발성 식각 잔류물에 의한 영향으로 판단된다. SIMS(secondary ion mass spectrometery) 분석을 통해 검증 하였다.

• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.5
• /
• pp.684-693
• /
• 2005

Statement of problem: Ti-6Al-7Nb alloy is used instead of Ti-6Al-4V alloy that was known to have toxicity. Purpose: This study was performed to investigate the effect of electrolyte concentration on the surface characteristics of anodized and hydrothermally-treated Ti-6Al-7Nb alloy Materials and methods: Discs of Ti-6Al-7Nb alloy of 20 mm in diameter and 2 mm in thickness were polished sequentially from #300 to 1,000 SiC paper ultrasonically washed with acetone and distilled water for 5 min, and dried in an oven at $50^{\circ}C$ for 24 hours. Anodizing was performed at current density $30mA/cm^2$ up to 300 V in electrolyte solutions containing $\beta-glycerophosphate$ disodium salt hydrate $(\beta-GP)$ and calcium acetate (CA). Hydrothermal treatment was conducted by high pressure steam at $300^{\circ}C$ for 2 hours using a autoclave. All samples were soaked in the Hanks' solution with pH 7.4 at $36.5^{\circ}C$ for 30 days. Results and conclusion: The results obtained were summarized as follows: 1. After hydrothermal treatment, the precipitated HA crystals showed the dense fine needle shape. However, with increasing the concentration of electrolyte they showed the shape of thick and short rod. 2. When the dense fine needle shape crystals was appeared after hydrothermal treatment, the precipitation of HA crystals in Hanks' solution was highly accelerated. 3. The crystal structures of $TiO_2$ in anodic oxide film were composed of strong anatase peak and weak rutile peak as analyzed with thin-film X-ray diffractometery. 4. The Ca/P ratio of the precipitated HA layer was equivalent to that of HA crystal in Hanks' solution.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.21 no.1
• /
• pp.33-42
• /
• 2005

This study was performed to investigate the surface properties and in vitro biocompatibility of electrochemically oxidized Ti-6Al-7Nb alloy by anodic spark discharge technique. Discs of Ti-6Al-7Nb alloy of 20 mm in diameter and 2 mm in thickness were polished sequentially from #300 to 1000 SiC paper, ultrasonically washed with acetone and distilled water for 5 min, and dried in an oven at $50^{\circ}C$ for 24 hours. Anodizing was performed using a regulated DC power supply. The applied voltages were given at 240, 280, 320, and 360 V and current density of $30mA/cm^2$. Hydrothermal treatment was conducted by high pressure steam at $300^{\circ}C$ for 2 hours using a autoclave. Samples were soaked in the Hanks' solution with pH 7.4 at $36.5^{\circ}C$ during 30 days. The results obtained were summarized as follows; 1. The oxide films were porous with pore size of $1{\sim}5{\mu}m$. The size of micropores increased with increasing the spark forming voltage. 2. The main crystal structure of the anodic oxide film was anatase type as analyzed with thin-film X-ray diffractometery. 3. Needle-like hydroxyapatite (HA) crystals were observed on anodic oxide films after hydrothermal treatment at $300^{\circ}C$ for 2 hours. The precipitation of HA crystals was accelerated with increasing the spark forming voltage. 4. The precipitation of the fine asperity-like HA crystals were observed after being immersed in Hanks' solution at $37^{\circ}C$. The precipitation of HA crystals was accelerated with increasing the spark forming voltage and the time of immersion in Hanks' solution. 5. The Ca/P ratio of the precipitated HA layer was equivalent to that of HA crystal as increasing the spark forming voltage and the time of immersion in Hanks' solution.