• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.350-350
• /
• 2010

Silicon carbide (SiC), one of the well known wide band gap semiconductors, shows high thermal conductivities, chemical inertness and breakdown energies. The design of normally-off 4H-SiC VJFETs [1] has been reported and 4H-SiC VJFETs with different lateral JFET channel opening dimensions have been studied [2]. In this work, 4H-SiC based VJFETs has been designed using the device simulator (ATLAS, Silvaco Data System, Inc). We varied the n-epi layer thickness (from $6\;{\mu}m$ to $10\;{\mu}m$) and the channel width (from $0.9\;{\mu}m$ to $1.2\;{\mu}m$), and investigated the static characteristics as blocking voltages, threshold voltages, on-resistances. We have shown that silicon carbide JFET structures of highly intensified blocking voltages with optimized figures of merit can thus be achieved by adjusting the epi layer thickness and channel width.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.61.1-61.1
• /
• 2011

We report on a detailed study on gap-state distribution in thin amorphous silicon layers(a-Si:H) with film thickness between 5 nm and 20 nm c-Si wafers performed by UV excited photoelectron spectroscopy(UV-PES). We measured how the work function, the gap state density, the position of the Fermi-level and the Urbch-energy depend on the layer thickness and the doping level of the ultra thin a-Si:H(n) layer. It was found, that for phosphorous doping the position of the Fermi level saturates at $E_F-E_V$=1.47 eV. This is achieved at a gas phase concentration of 10000 ppm $PH_3$ in the $SiH_4/H_2$ mixture which was used for the PECVD deposition process. The variation of the doping level from 0 to 20000 ppm $PH_3$ addition results in an increase of the Urbach energy from 65 meV to 101 meV and in an increase of the gap state density at midgap($E_i-E_V$=0.86eV) from $3{\times}10^{18}$ to $2{\times}1019cm^{-3}eV^{-1}$.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.212-212
• /
• 2012

수소화된 실리콘 질화막은 결정질 태양전지 산업에서 반사방지막 과 패시베이션 층으로 널리 사용되고 있다. 또한, 수소화된 질화막은 금속 소성공정과 같은 높은 공정온도를 거친 후에도 결정질 실리콘 태양전지의 표면층으로서 충족되는 특성들이 변하지 않고 유지되어야 한다. 본 연구에서는 PECVD 장치를 이용한 수소화된 실리콘 질화막의 특성 변화에 대한 경향성을 알아보기 위하여 증착조건의 변수(온도, 증착거리, 무선주파수 전력, 가스비율 등.)들을 다양하게 가변하여 증착조건의 최적화를 찾았다. 이후 수소화된 실리콘 질화막의 전구체가 되는 사일렌(SiH4)과 암모니아(NH3) 가스비를 변화시켜가며 결정질 실리콘 태양전지에 사용되기 위한 박막의 광학 전기 화학적 그리고 표면 패시베이션 특성들을 분석하였다. 가스 비율에 따른 수소화된 실리콘 질화막의 굴절률 범위는 1.90-2.20까지 나타내었다. 결정질 실리콘 태양전지에 사용하기 위한 가장 적합한 특성은 3.6(NH3/SiH4)의 가스비율을 나타내었다. 이를 통하여 PECVD 내에서 구현 할 수 있는 가스의 혼합(SiH4+NH3+N2, SiH4+NH3, SiH4+N2)을 달리하여 박막의 광학적 및 패시베이션 특성을 분석하였다. 이후 $156{\times}156mm$ 대면적 결정질 실리콘 태양전지를 제작하여 SiH4+NH3+N2 의 가스 혼합에서 17.2%의 변환 효율을 나타내었다.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.240.1-240.1
• /
• 2012

We performed simultaneous observations of SiO v=1, 2, $^{29}SiO$ v=0, J=1-0 and $H_2O$ $6_{16}-5_{23}$ maser lines toward 252 OH/IR stars using the Korean VLBI Network 21m telescopes. The observations were carried out from 2011 November to 2012 July for studying SiO and $H_2O$ maser properties associated with the evolutionary stages of OH/IR stars. Both $H_2O$ and SiO masers were detected from 49 sources, one-side maser of SiO and $H_2O$ was detected from 109 and 11 sources, respectively. Mutual relations between SiO and $H_2O$ maser properties are investigated based on statistical analyses. We also investigate these maser properties in the IRAS two-color diagram related with stellar evolutionary sequence.

• Journal of the Semiconductor & Display Technology
• /
• v.19 no.2
• /
• pp.45-50
• /
• 2020

We investigated the Si_1-xGe_x surface properties when dry cleaning the films using NF₃ / H₂O remote plasma. After the dry cleaning process, it was found that about 80-250 nm wide bumps were formed on the SiGe surface regardless of Ge concentration in the rage of x = 0.1 ~ 0.3. In addition, effects of the dry cleaning processing parameters such as pressure, substrate temperature, and H₂O flow rates were examined. It was found that the surface bump is significantly dependent on the flow rate of H₂O. Based on these observations, we would like to provide additional guidelines for implementing the dry cleaning process to SiGe materials.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.162-163
• /
• 2007

The dry etching of Si was investigated using direct dc biasing to the Si substrate. The TCP type etching system with a feed-through for applying a dc bias was used in the etching. The applied dc bias and ICP power was varied to examine the effect on the etching at the fixed chamber pressure and $SF_6$ flow rate of 10 mTorr and 10 sccm during. When the plasma was generated at ICP power of 100 W, the etch rate of Si was increased with the bias for the biased samples. However, the etching of Si for the non-biased sample was enhanced for the increased ICP power.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.2
• /
• pp.128-131
• /
• 2009

Silicon carbide (SiC) has attracted significant attention for high frequency, high temperature and high power devices due to its superior properties such as the large band gap, high breakdown electric field, high saturation velocity and high thermal conductivity. We performed Al ion implantation processes on n-type 4H-SiC substrate using a SILVACO ATHENA numerical simulator. The ion implantation model used Monte-Carlo method. We simulated the effect of channeling by Al implantation in both 0 off-axis and 8 off-axis n-type 4H-SiC substrate. We have investigated the effect of varying the implantation energies and the corresponding doses on the distribution of Al in 4H-SiC. The controlled implantation energies were 40, 60, 80, 100 and 120 keV and the implantation doses varied from $2{\times}10^{14}$ to $1{\times}10^{15}\;cm^{-2}$. The Al ion distribution was deeper with increasing implantation energy, whereas the doping level increased with increasing dose. The effect of post-implantation annealing on the electrical properties of Al-implanted p-n junction diode were also investigated.

• Journal of the Korean Vacuum Society
• /
• v.4 no.S2
• /
• pp.84-89
• /
• 1995

The growth and the film characteristics of heteroepitaxial $Si_{1-x}Ge_x$ films growth by the Rapid Thermal Chemical Vapor Deposition(RTCVD)method are described. For the growth of $Si_{1-x}Ge_x$ heteroepitaxial layers, $SiH_4/GeH_4/H_2$gas mixtures are used. The growth conditions are varied to investigate their effects on the Si/Ge composition ratios, the interface abruptness and crystalline properties. The Si/Ge composition ratios are analyzed with the RBS and the SIMS techniques, and the interface abruptness are deduced from these data. The crystalline properties are analyzed from TEM pictures. The experimental data shows that the crystalline perfection is excellent at the growth temperature of as low as $650^{\circ}C$, and the composition ratios change linearly with $SiH_4/GeT_$$ gas mixing ratios in our experimental ranges. Boron doping experiments are also performed using 200 ppm $B_2H_6$ source gas. The doping profiles are measured with SIMS technique. The SIMS data shows that the doping abruptness can be controlled within about 200$\AA$/decade.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.88-88
• /
• 2009

실리콘 이종접합 태양전지 제작을 위한 주요 요소기술 중 TCO/a-Si:H 간의 계면 특성은 태양전지 효율을 결정하는 주요 인자이다. 일반적으로 투명전도 산화막으로는 ZnO:Al 또는 ITO 가 사용되고 있으며 Zn, In, Sn, O 등의 확산과 Si원소의 확산으로 TCO/a-Si:H 계면에서 $SiO_x$가 생성되어 태양전지 충진률을 감소시키는 영향을 미친다. 따라서 본 연구에서는 TCO/a-Si 계면에서 확산을 방지 하면서 패시베이션 역할을 하는 완충층을 삽입하여 실리콘 이종접합 태양전지의 효율을 높이는 연구를 수행하였다. 완충층으로 사용된 ZnO:Al의 수소화와 Zn 박막, $TiO_2$ 박막의 전기 광학적 특성을 분석하였고 AES 분석을 통해 $SiO_x$의 생성과 각 원소의 확산정도를 분석하고, CTLM을 이용하여 TCO/완충층/a-Si 간의 접촉저항을 측정하였다. 결과적으로 완충층으로 사용된 $TiO_2$(5nm)는 광특성에 큰 감소요인 없이 전기적 특성과 접촉저항 특성이 우수하였으며, 원소들간의 확산방지층으로도 우수한 특성을 보였다. ZnO:Al의 수소화는 SIMS 분석 결과 수소원소들이 계면쪽에 위치하지 않고 표면쪽에 다수 존재함으로써 패시베이션 특성을 크게 보이지 않았으나 AZO 박막의 전기적 특성은 크게 향상 시켰다. 그밖에 완충층으로 사용된 Zn 박막은 두께가 두꺼원 질수록 접촉저항의 감소를 가져왔으나 광학적 특성이 크게 감소하면서 효율적인 광포획 특성을 가지지 못하였다. 본 연구를 통하여 TCO/a-Si:H 간의 완충층 삽입을 통해 접촉저항을 낮추고 원소간의 확산을 억제하여 계면 패시베이션 특성을 향상 시킬수 있었다.

• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1818-1820
• /
• 1999

This paper presents direct ${\mu}c$-Si:H thin film growth on the glass substrates using RPCVD system (remote plasma chemical vapor deposition) in low temperature. Hydrogenated micro-crystalline silicon deposited by RPCVD system in low temperature is very useful material for photovoltaic devices, sensor applications, and TFTs (thin film transistors). Varying the deposition conditions such as substrate temperature, gas flow rate, reactive gas ratio $(SiH_4/H_2)$, total chamber pressure, and rf power, we deposited ${\mu}c$-Si:H thin films on the glass substrates (Corning glass 1737). And then we measured the structural and electrical properties of the films.