• 마이크로전자및패키징학회지
• /
• 제30권4호
• /
• pp.8-16
• /
• 2023

디바이스 소형화의 한계에 다다르면서, 이를 극복할 수 있는 방안으로 차세대 패키징 기술의 중요성이 부각되고 있다. 병목 현상을 해결하기 위해 2.5D 및 3D 인터커넥트 피치의 필요성이 커지고 있는데, 이는 신호 지연을 최소화 할 수 있도록 크기가 작고, 전력 소모가 적으며, 많은 I/O를 가져야 하는 등의 요구 사항을 충족해야 한다. 기존 솔더 범프의 경우 미세화 한계와 고온 공정에서 녹는 등의 신뢰성 문제가 있어, 하이브리드 본딩 기술이 대안책으로 주목받고 있으며 최근 Cu/SiO₂ 구조의 문제점을 개선하고자 SiCN에 대한 연구 또한 활발히 진행되고 있다. 해당 논문에서는 Cu/SiO₂ 구조 대비 Cu/SiCN이 가지는 이점을 전구체, 증착 온도 및 기판 온도, 증착 방식, 그리고 사용 가스 등 다양한 증착 조건에 따른 SiCN 필름의 특성 변화 관점에서 소개한다. 또한, SiCN-SiCN 본딩의 핵심 메커니즘인 Dangling bond와 OH 그룹의 작용, 그리고 플라즈마 표면 처리 효과에 대해 설명함으로써 SiO₂와의 차이점에 대해 기술한다. 이를 통해, 궁극적으로 Cu/SiCN 하이브리드 본딩 구조 적용 시 얻을 수 있는 이점에 대해 제시하고자 한다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 영호남 합동 학술대회 및 춘계학술대회 논문집 센서 박막 기술교육
• /
• pp.152-155
• /
• 2006

Carbon nitride ($CN_X$) films were prepared by reactive RF magnetron sputtering system at various deposition conditions and the C-V characteristics of MIS(metal - insulator - semiconductor) capacitors that have the structures of Al/$CN_x$/p-Si/Al and Al/$CN_x$/$Si_3N_4$/p-Si/Al were investigated. The resistivity of carbon nitride was above $2.40{\times}10^8{\Omega}{\cdot}cm$ at room temperature. The C-V plot showed a typical capacitance-voltage characteristics of semiconductor insulating layers, while it showed hysterisis due to interface charges. Amorphous carbon nitride (a-$CN_x$) films, that have relatively high resistivity and low dielectric constant could be useful as interlayer insulator materials of VLSI(very large-scale integration) and ULSI(ultra large-scale integration).

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2006년도 추계학술대회 발표 논문집
• /
• pp.110-114
• /
• 2006

Dielectric properties of glass-ceramics with fresnoite(Ba2TiSi208) crystals have been investigated in xK20-(33.3-x)BaO-16.7TiO2-50SiO2 ($0{\leq}x{\leq}20mol%$) glasses. The glassy nature was analyzed by differential thermal analyses and glass-ceramics was variable and control table by the processing parameters like time and temperature. Dielectric constant was measured over a temperature from 125K to 425k at frequencies form 100Hz to 1MHz, and laid in the range 16-10. Piezoelectric constant d33 was measured using a YE2703A d33meter and changed from 5.9 to 4.8pCN-1 with x contents. The spontaneous polarization Ps estimated from the hysteresis at ${\pm}1.2kV$ was ${\sim}0.3\;{\mu}C/cm2$ at room temperature.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.84-87
• /
• 2003

Carbon nitride ($CN_x$) films were prepared by reactive RF magnetron sputtering system with DC bias at various deposition conditions and the electrical properties were investigated. The films were characterized by fourier transform infrared (FTIR) spectroscopy, and X-ray photoelectron spectroscopy (XPS). The metal-insulator-semiconductor (MIS) capacitor which has $Al/CN_x/Si$ structure was designed and fabricated to investigate the capacitance-voltage (C-V) characteristics. Dielectric constant of carbon nitride films is very small.

• 센서학회지
• /
• 제16권2호
• /
• pp.97-103
• /
• 2007

Crystallized carbon nitride film that has many stable physical and/or chemical properties has been expected potentially by a new electrical material. However, one of the most significant problems degrading the quality of carbon nitride films is an existence of N-H and C-H bonds from the deposition environment. The possibility of these reactions with hydroxyl group in carbon nitride films, caused by a hydrogen attack, was suggested and proved in our previous reports that this undesired effect could be applied for fabricating micro-humidity sensors. In this study, MIS capacitor and MIM capacitor with $5{\mu}m{\times}5{\mu}m$ meshes were fabricated. As an insulator, carbon nitride film was deposited on a $Si_{3}N_{4}/SiO_{2}/Si$ substrate using reactive magnetron sputtering system, and its dielectric constant, C-V characteristics and humidity sensing properties were investigated. The fabricated humidity sensors showed a linearity in the humidity range of 0 %RH to 80 %RH. These results reveal that MIS and MIM $CN_{X}$ capacitive humidity sensors can be used for Si based micro-humidity sensors.

• Transactions on Electrical and Electronic Materials
• /
• 제7권5호
• /
• pp.257-261
• /
• 2006

Nano-structured carbon nitride $(CN_x)$ films were prepared by reactive RF magnetron sputtering with a DC bias at various deposition conditions, and the physical and electrical properties were investigated. FTIR spectrum indicated an ${alpha}C_3N_4$ peak in the films. The carbon nitride film deposited on Si substrate had a nano-structured surface morphology. The grain size was about 20 nm and the deposition rate was $1.7{\mu}m/hr$. When the $N_2/Ar$ ratio was 3/7, the level of nitrogen incorporation was 34.3 at%. The film had a low dielectric constant. The metal-insulator-semiconductor (MIS) capacitors that the carbon nitride was deposited as insulators, exhibited a typical C-V characteristics.