• 한국재료학회지
• /
• 제21권2호
• /
• pp.115-119
• /
• 2011

Si Nanowire (NW) field effect transistors (FETs) were fabricated on hard Si and flexible polyimide (PI) substrates, and their electrical characteristics were compared. Si NWs used as channels were synthesized by electroless etching method at low temperature, and these NWs were refined using a centrifugation method to get the NWs to have an optimal diameter and length for FETs. The gate insulator was poly(4-vinylphenol) (PVP), prepared using a spin-coating method on the PI substrate. Gold was used as electrodes whose gap was 8 ${\mu}m$. These gold electrodes were deposited using a thermal evaporator. Current-voltage (I-V) characteristics of the device were measured using a semiconductor analyzer, HP-4145B. The electrical properties of the device were characterized through hole mobility, $I_{on}/I_{off}$ ratio and threshold voltage. The results showed that the electrical properties of the TFTs on PVP were similar to those of TFTs on $SiO_2$. The bending durability of SiNWs TFTs on PI substrate was also studied with increasing bending times. The results showed that the electrical properties were maintained until the sample was folded about 500 times. But, after more than 1000 bending tests, drain current showed a rapid decrease due to the defects caused by the roughness of the surface of the Si NWs and mismatches of the Si NWs with electrodes.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2003년도 기술심포지움 논문집
• /
• pp.221-225
• /
• 2003

The MFIS-FET(Field Effect Transistor) devices using $BLT/Y_2O_3$ buffer layer on p-Si(100) substrates were fabricated by the Sol-Gel method and conventional memory processes. The crystal structure, morphologies and electrical properties of prepared devices were investigated by using various measuring techniques. From the C-V(capacitance-voltage) data at 5V, the memory window voltage of the $Pt/BLT/Y_2O_3/si$ structure decreased from 1.4V to 0.6V with increasing the annealing temperature from $700^{\circ}C\;to\;750^{\circ}C$. The drain current (Ic) as a function of gate voltages $(V_G)$ for the $MFIS(Pt/BLT/Y_2O_3/Si(100))-FET$ devices at gate voltages $(V_G)$ of 3V, 4V and 5V, the memory window voltages increased from 0.3V to 0.8V as $V_G$ increased from 3V to 5V.

• 센서학회지
• /
• 제2권1호
• /
• pp.35-40
• /
• 1993

$Si_{3}N_{4}$ 박막의 코팅된 pH-ISFET의 게이트 부위 위에 lipase 효소를 고정화하여 FET(field effect transistor) 형지질(lipid) 센서를 제조하였다. 효소 고정화막 형성 물질로는 수용성 고분자인 polyvinyl alcohol(PVA)에 감광성기인 1-methyl-4-(formylstyryl) pyridinium methosulfate(SbQ)를 결합시킨 PVA-SbQ를 사용하였다. PVA-SbQ 수용액 (SbQ 1mole %, 10 wt%) $200{\mu}L$, bovine serum albumin (BSA) 7.5 mg, lipase 10 mg으로 구성 된 현탁액을 사용한 사진식각(photolithographic) 공정의 최적 조건은 피막의 상온 진공 건조 시간 45분, spin coater의 회전수 $5,000{\sim}6,000$ rpm, UV 노광시간 $20{\sim}30$초, 증류수 현상 시간 $30{\sim}40$초로 나타났다. 이렇게 구성된 지질 센서는 triacetin을 지질 시료로 하였을 때 $10{\sim}100$ mM의 농도 범위에서 직선성의 검정선을 나타내었다.

• 마이크로전자및패키징학회지
• /
• 제12권1호
• /
• pp.21-26
• /
• 2005

The field effect transistors (FETs) were fabricated ell $Y_2O_3/Si(100)$ substrates by the conventional memory processes and sol-gel process using $(Bi,La)Ti_3O_{12}(BLT)$ ferroelectric gate materials. The remnant polarization ($2Pr = Pr^+-Pr^-$) int Pt/BLT/Pt/Si capacitors increased from $22 {\mu}C/cm^2$ to $30{\mu}C/ cm^2$ at 5V as the annealing temperature increased from $700^{\circ}C$ to $750^{\circ}C$. There was no drastic degradation in the polarization values after applying the retention read pulse for $10^{5.5}$ seconds. The capacitance-voltage data of $Pt/BLT/Y_2O_3/Si$ capacitors at 5V input voltage showed that the memory window voltage decreased from 1.4V to 0.6V as the annealing temperature increased from $700^{\circ}C$ to $750^{\circ}C$. The leakage current of the $Pt/BLT/Y_2O_3/Si$ capacitors annealed at $750^{\circ}C$ was about $510^{-8}A/cm^2$ at 5V. From the drain currents versus gate voltages ($V_G$) for $Pt/BLT/Y_2O_3/Si(100)$ FET devices, the memory window voltages increased from 0.3V to 0.8V with increasing tile $V_G$ from 3V to 5V.

• Bulletin of the Korean Chemical Society
• /
• 제29권5호
• /
• pp.1048-1050
• /
• 2008

Electric current flow was observed through imogolite film when imogolite ($(HO)_3Al_2O_3SiOH$) was exposed to water molecules and connected to external electrodes. Current flow was due to the bound water on the surface of imogolite. Current flow increased as the pH of the water decreased. The current-voltage (I-V) measurements from a field effective transistor (FET) using $H_2O$/imogolite film revealed that the current carrier in $H_2O$/ imogolite had p-type characteristics, i.e. the carrier was probably $H^+$. The possible mechanism for current transportation in imogolite/water was also suggested in this paper.

• 한국진공학회지
• /
• 제17권3호
• /
• pp.199-203
• /
• 2008

$O_2$ 플라즈마를 이용한 표면처리 공정이 Bio-FET (biologically sensitive field-effect transistor)에 미치는 영향을 조사하기 위하여, SOI (Silicon-on-Insulator) wafer와 sSOI (strained- Si-on-Insulator) wafer를 이용하여 pseudo-MOSFET을 제작하고 $O_2$ 플라즈마를 이용하여 표면처리를 진행하였다. 제작된 시료들은 back gated metal contact junction 방식으로 측정되었다. $I_D-V_G$ 특성과 field effect mobility 특성의 관찰을 통하여 $O_2$ 플라즈마 표면처리에 따른 각 시료들의 전기적 특성 변화에 대하여 관찰하였다. 그리고 $O_2$ 플라즈마 표면처리 과정에서 플라즈마에 의한 손상을 받은 시료들은 2% 수소희석가스 ($H_2/N_2$)를 이용한 후속 열처리 공정을 진행한 후 전기적 특성이 향상되는 것을 관찰할 수 있었다. 이는 수소희석가스를 이용한 후속 열처리 공정을 통하여 산화막과 Si 사이의 계면 준위와 산화막 내부의 전하 포획 준위를 감소시켰기 때문이다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제13권6호
• /
• pp.576-580
• /
• 2013

We investigate the enhanced effects of asymmetry ratio variations of the source and drain area in silicon (Si) field-effect transistor (FET). Photoresponse according to the variation of asymmetry difference between the width of source and drain are obtained by using the plasmonic terahertz (THz) wave detector simulation based on technology computer-aided design (TCAD) with the quasi-plasma 2DEG model. The simulation results demonstrate the potential of Si FETs with asymmetric source and drain structures as the promising plasmonic THz detectors.

• 대한전자공학회논문지SD
• /
• 제41권6호
• /
• pp.1-7
• /
• 2004

본 논문에서는 2차원 양자 역학적 모델링 및 시뮬레이션(quantum mechanical modeling and simulation)으로써, 자기정렬 이중게이츠 구조(self-aligned double-gate structure)인 FinFET에 관하여 결합된 푸아송-슈뢰딩거 방정식(coupled Poisson and Schrodinger equations)를 셀프-컨시스턴트(self-consistent)한 방법으로 해석하는 수치적 모델을 제안한다. 시뮬레이션은 게이트 길이(Lg)를 10에서 80nm까지, 실리콘 핀 두께($T_{fin}$)를 10에서 40nm까지 변화시켜가며 시행되었다. 시뮬레이션의 검증을 위한 전류-전압 특성을 실험 결과값과 비교하였으며, 문턱 전압 이하 기울기(subthreshold swing), 문턱 전압 롤-오프(thresholdvoltage roll-off), 그리고 드레인 유기 장벽 감소(drain induced barrier lowering, DIBL)과 같은 파라미터를 추출함으로써 단채널 효과를 줄이기 위한 소자 최적화를 시행하였다. 또한, 고전적 방법과 양자 역학적 방법의 시뮬레이션 결과를 비교함으로써,양자 역학적 해석의 필요성을 확인하였다. 본 연구를 통해서, FinFET과 같은 구조가 단채널 효과를 줄이는데 이상적이며, 나노-스케일 소자 구조를 해석함에 있어 양자 역학적 시뮬레이션이 필수적임을 알 수 있었다.

• 한국전기전자재료학회논문지
• /
• 제28권11호
• /
• pp.683-689
• /
• 2015

For the formation of $N^+$ doping, the antimony ions are mainly used for the fabrication of a BJT (bipolar junction transistor), CMOS (complementary metal oxide semiconductor), FET (field effect transistor) and BiCMOS (bipolar and complementary metal oxide semiconductor) process integration. Antimony is a heavy element and has relatively a low diffusion coefficient in silicon. Therefore, antimony is preferred as a candidate of ultra shallow junction for n type doping instead of arsenic implantation. Three-dimensional (3D) profiles of antimony are also compared one another from different tilt angles and incident energies under same dimensional conditions. The diffusion effect of antimony showed ORD (oxygen retarded diffusion) after thermal oxidation process. The interfacial effect of a $SiO_2/Si$ is influenced antimony diffusion and showed segregation effects during the oxidation process. The surface sputtering effect of antimony must be considered due to its heavy mass in the case of low energy and high dose conditions. The range of antimony implanted in amorphous and crystalline silicon are compared each other and its data and profiles also showed and explained after thermal annealing under inert $N_2$ gas and dry oxidation.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제12권4호
• /
• pp.482-491
• /
• 2012

In the present work, comprehensive investigation of the ambipolar characteristics of two silicon (Si) tunnel field-effect transistor (TFET) architectures (i.e. p-i-n and p-n-p-n) has been carried out. The impact of architectural modifications such as heterogeneous gate (HG) dielectric, gate drain underlap (GDU) and asymmetric source/drain doping on the ambipolar behavior is quantified in terms of physical parameters proposed for ambipolarity characterization. Moreover, the impact on the miller capacitance is also taken into consideration since ambipolarity is directly related to reliable logic circuit operation and miller capacitance is related to circuit performance.