• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.2
• /
• pp.173-176
• /
• 2019

In this study, a Ka-band waveguide rotary joint that can be applied to a millimeter-wave seeker is designed and fabricated. The proposed rotary joint maintains a low standing-wave ratio and low-loss characteristics, and has two rotary axes designed to enable azimuth and elevation rotation. The rotary joint is designed as a ridge-waveguide-type mode converter and a ${\lambda}/4$ choke structure to match the electromagnetic wave propagation mode between the spherical and circular waveguides. A performance test using a network analyzer and a high-power transmitter to assess vibration and shock were conducted. Results showed that the rotary joint had a very low standing-wave ratio of less than the maximum of 1.19:1 and an insertion loss of less than 0.80 dB at $F_C{\pm}500MHz$.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.675-678
• /
• 2017

In the present, various methods have been employed to obtain the lesser thrust loss. Numerical simulations have been carried out for optimizing the thrust vector control system. Thrust vector control based on coflowing shear layer is an effective method to control the primary jet direction in the absence of moving parts. Thrust vector in symmetric nozzles is acquired by secondary flow injections that result to boundary layer separation. The pressure in secondary flow inlet was varied to check the deflection angle of jet flow.

• Journal of The Korean Astronomical Society
• /
• v.50 no.6
• /
• pp.157-165
• /
• 2017

$H_2O$ maser emission at 22 GHz in the circumstellar envelope is one of the good tracers of detailed physics and kinematics in the mass loss process of asymptotic giant branch stars. Long-term monitoring of an $H_2O$ maser spectrum with high time resolution enables us to clarify acceleration processes of the expanding shell in the stellar atmosphere. We monitored the $H_2O$ maser emission of the semi-regular variable R Crt with the Kagoshima 6-m telescope, and obtained a large data set of over 180 maser spectra over a period of 1.3 years with an observational span of a few days. Using an automatic peak detection method based on least-squares fitting, we exhaustively detected peaks as significant velocity components with the radial velocity on a $0.1kms^{-1}$ scale. This analysis result shows that the radial velocity of red-shifted and blue-shifted components exhibits a change between acceleration and deceleration on the time scale of a few hundred days. These velocity variations are likely to correlate with intensity variations, in particular during flaring state of $H_2O$ masers. It seems reasonable to consider that the velocity variation of the maser source is caused by shock propagation in the envelope due to stellar pulsation. However, it is difficult to explain the relationship between the velocity variation and the intensity variation only from shock propagation effects. We found that a time delay of the integrated maser intensity with respect to the optical light curve is about 150 days.

• The Korean Journal of Physiology and Pharmacology
• /
• v.14 no.3
• /
• pp.157-161
• /
• 2010

Heat shock proteins (HSPs) are specifically induced by various forms of stress. Hsp70.1, a member of the hsp70 family is known to play an important role in cytoprotection from stressful insults. However, the functional role of Hsp70 in motor function after spinal cord injury (SCI) is still unclear. To study the role of hsp70.1 in motor recovery following SCI, we assessed locomotor function in hsp70.1 knockout (KO) mice and their wild-type (WT) mice via the Basso, Beattie and Bresnahan (BBB) locomotor rating scale, before and after spinal hemisection at T13 level. We also examined lesion size in the spinal cord using Luxol fast blue/cresyl violet staining. One day after injury, KO and WT mice showed no significant difference in the motor function due to complete paralysis following spinal hemisection. However, when it compared to WT mice, KO mice had significantly delayed and decreased functional outcomes from 4 days up to 21 days after SCI. KO mice also showed significantly greater lesion size in the spinal cord than WT mice showed at 21 days after spinal hemisection. These results suggest that Hsp70 has a protective effect against traumatic SCI and the manipulation of the hsp70.1 gene may help improve the recovery of motor function, thereby enhancing neuroprotection after SCI.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.1
• /
• pp.107-112
• /
• 2005

A high environmental temperature affects the economic performance of pigs. Heat shock protein 70 (HSP70) has been reported to participate importantly in thermotolerance. This study aims to produce transgenic pigs overexpressing porcine HSP70.2, the highly inducible one of HSP70 members, and to prove the cellular thermotolerance in the primary fibroblasts from the transgenics. A recombinant plasmid in which the sequence that encodes the porcine HSP70.2 gene is fused to green fluorescence protein (GFP) was constructed under the control of cytomegalovirus (CMV) enhancer and promoter. Two transgenic pigs were produced by microinjecting pCMV-HSP70-GFP DNA into the pronucleus of fertilized eggs. Immunoblot assay revealed the varied overexpression level (6.4% and 1.4%) of HSP70-GFP in transgenic pigs. After heating at $45^{\circ}C$ for 3 h, the survival rate (78.1%) of the primary fibroblast cells from the highly expressing transgenic pig exceeded that from the non-transgenic pig (62.9%). This result showed that primary fibroblasts overexpressing HSP70-GFP confer cell thermotolerance. We suggest that transgenic pigs overexpressing HSP70 might improve their thermotolerance in summer and therefore reduce the economic loss in animal production.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.6
• /
• pp.89-96
• /
• 2013

Considering the complexity and difficulty on the researching, how to enhance the performance of ejector-diffuser system effectively became a significant task. In the present study, the supersonic nozzle was redesigned using Chevrons installed at the inlet of the secondary stream of the ejector-diffuser system for the purpose of the performance improvement. A CFD method based on Fluent has been applied to simulate the supersonic flows and shock waves inside the ejector. Primary numerical analysis results show that the Chevrons get a positive effect on the ejector flows. The comparison of ejector performance with and without the Chevron was obtained and optimal number of chevron lobe is discussed to increase the performance. The ejector-diffuser system performance is discussed in terms of the entrainment ratio, pressure recovery as well as total pressure loss.

• Journal of Mushroom
• /
• v.4 no.1
• /
• pp.39-42
• /
• 2006

Cauliflower mushroom(Sparassis crispa) contains much amount of ${\beta}$-glucan, which make lots of farmer want to cultivate the mushroom. Since a practical cultivation method is not provided yet, the mushroom is considered as a difficult crop to deal with. In this study, we tried to develope a simple method to cultivate the mushroom by use of coniferous sawdust-based medium with wheat flour and molasses. There was no significant differences between the sawdust spawn and the liquid spawn for the mycelial growth of the mushroom. The cold shock in $4^{\circ}C$ for a day was thought to be the best way to seduce primordium formation. The sawdust medium of Pseudotsuga menziesii mixed with wheat flour, corn chip, cottonseed meal and 10% molasses was showed the best yield with 41% followed by that of Larix leptolepis mixed with the same additives with 37% of yield. There was good relations between the fruit-body production and the weight loss of the sawdust substrate.

• Journal of Energy Engineering
• /
• v.11 no.1
• /
• pp.26-33
• /
• 2002

In this paper, incompressible and compressible flow characteristics around the butterfly valve have been investigated. In order to simplify the problem, a flat disk valve with various valve disk angles and pressure ratios is considered in the present calculations. It was found that as the disk angle increases, the stagnation point on the front surface of the disk moves to the center of the surface and the inflow velocity decreases. The maximum flow velocity occurs at the downstream of throat because of the formation of vents contracta. As the pressure ratio decreases, compressibility effects increase and the jet formed between the throttle body wall and the disk edge becomes supersonic. This flow also builds up as a shock cell structure. The increase of disk angle and pressure ratio makes the mass flow at the inlet decrease, while the increase of disk angle and the decrease of pressure ratio make the pressure loss coefficient increase.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.8
• /
• pp.89-95
• /
• 2008

This paper describes the checking results and some problems of guard lamps installed in the field. The guard lamp providing night security for people is installed outdoors and exposed to the natural factors causing secular ageing and the people's vandalism, etc., thus it is prone to get troubles in function. In fact, the guard lamps has been left without considering the fundamental measures in the legislative system in spite of the loss of lives due to the electric shock accidents repetitively taking place every year. This study arouses people's attention to the risk due to the lack of management and maintenance of the guard lamp by investigating the recent technology and the actual operating conditions and some problems and countermeasures were ultimately deduced. In this process, we reflected on the various opinions through fieldwork and had a couple of consultations with field staffs, manufacturers concerned and active officers with local autonomous entities.

• Nuclear Engineering and Technology
• /
• v.24 no.1
• /
• pp.86-97
• /
• 1992

The purpose of this paper is to evaluate the direct vessel injection design from a pressurized thermal shock(PTS) viewpoint for the Combustion Engineering System 80+ A break of the main steam line from zero power and a 0.05 ft$^2$small break loss-of-coolant accident (LOCA) from full power were selected as the potential PTS events. In order to investigate the stratification effects in the reactor downcomer region, the fluid mixing analysis was performed using the COMMIX-IB code for steam line break and using the REMIX code for 0.05 ft$^2$small break LOCA. The stress distributions within the reactor vessel walls experiencing the pressure and the temperature transients were calculated using the OCA-P code for both events. The results of the analysis showed that a small break LOCA without decay heat presented the greatest challenge to the vessel, however, there is no crack initiation through end-of-life of the vessel with consideration of decay heat.