• Journal of Industrial Technology
• /
• v.21 no.B
• /
• pp.37-44
• /
• 2001

Distribution System is considered as the most important part of SCM when the satisfaction of customer demand is considered. This paper focus on the backorder policies for stockout which is occurred in each regional distribution center of two-echelon distribution system facing stochastic demand process. Four concepts for the efficient system operation are suggested. First, at least 30% reduction of stockout is achieved by introduction of 50/25 allocation policy to distribution system. Second, transportation cost and lead-time of backorder are decreased by allowance of internal supply between regional distribution centers. Third, the frequency of emergency supply is minimized by application of Ship-up-to- expected-demand backorder policies. Finally we suggest several effective rules to select multi-internal suppliers. Simulation tests show the efficiency of our backorder policies and enhancement of customer service level.

• Journal of Ocean Engineering and Technology
• /
• v.20 no.3 s.70
• /
• pp.77-81
• /
• 2006

In this study, design parameters of ice-transiting vessels in the world, currently in service or under construction, were collected and a database of principal particulars for each ship was established. To understand the recent design trend, ice-transiting vessels were categorized into four groups, i.e., conventional icebreakers, icebreaking tug/supply/research vessels, ice-strengthened passenger/car ferry and ice-strengthened cargo vessels. Changes in principal particulars for each group were reviewed and summarized. It was found that the most significant change in the design of ice-transiting vessels was the increment of large size commercial cargo vessels. It is believed that the recent hike of oil prices and booming of Russian economy has resulted in the need for year-round operation with bigger ships in the Baltic Sea and in the Sea of Okhotsk and also along the Northern Sea Route in Russian Arctic Sea.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.06a
• /
• pp.560-562
• /
• 2013

OIl & Gas의 시추 및 생산 해역이 연안 천수역에서 점차 심해로 이동하는 추세로서, 오프쇼어 지원선(OSV, Offshore Support Vessel)도 원근해 이동과 작업구역의 거친 해상조건에 대응하기 위해, 선박크기의 대형화, 고성능화, 대용량화, 저환경부하화, 그리고 안정성 및 신뢰성을 강력하게 요구하는 선박으로 수요가 증가하고 있다. 대 수심용 OSV의 종류와 기능, 시장현황과 발주추이, 그리고 관련 기술개발의 동향 등에 대한 조사 분석을 해봄으로서 국내 중소 조선소 및 기자재업체의 시장기회에 대한 고찰을 해 보았다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.1
• /
• pp.117-124
• /
• 2022

The International Maritime Organization (IMO) is tightening environmental regulations in the shipping sector to reduce air pollutants such as greenhouse gases emitted from ships. Meanwhile, the paradigm of the shipbuilding and shipping industries is shifting toward eco-friendly and high-efficiency ships worldwide. The Republic of Korea is also promoting a policy to expand the supply of eco-friendly ships from 2020 to disseminate them. In this article, a survey was conducted with 12 experts on the government's eco-friendly ship supply policy, and the priority of the policy was evaluated using the analytic hierarchy process (AHP). As a result of the comprehensive evaluation of the priorities for six priority tasks, "Securing the world's leading technology for future eco-friendly ships" for the development of carbon-free and low carbon ships was the highest. This study, which analyzed the importance of eco-friendly ship policies through AHP analysis, can be used as data to preemptively respond to international marine environmental regulations and to improve policy execution efficiency such as budget allocation and policy development regarding protecting national shipping and shipbuilding industries.

• International Journal of Quality Innovation
• /
• v.9 no.1
• /
• pp.68-93
• /
• 2008

The steel bars account for a high percentage of material costs for the current construction projects. At the present time, most of the construction projects for the factories of thin-film transistor liquid crystal display (TFT-LCD) complete the transactions of steel bars when the suppliers ship the steel bars to the temporary storage/processing sites. This paper applies the buy-in concept in the Theory of Constraint (TOC) on the supply chain of steel bars. In this study, suppliers are required to establish warehouses at the construction sites and complete the transactions when the formed and processed steel bars are shipped into the factory sites. The aim is to find a win-win solution to meet with the expectations from constructors as they hope that there is no need to build up inventories but supply is ready at any time. Also, this paper compares and analyzes the traditional supply/inventory model of steel bars and the Demand-Pull (D-P) model under the TOC framework. It is proved that Vendor Management Inventory (VMI) in the D-P model is able to more effectively manage steel bars as a material.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.10a
• /
• pp.297-302
• /
• 2003

This study was carried out to check the contingency planning methods under the analysis of oil spill potential and make a guide line to apply the results to the port of Busan. The expected spilled oil drift patterns are considered with the most probable scenarios under the base of the oil spill potential. The results obtained from this study are as follows: (1) Analysis method of oil spill potent was proposed and the applicability was proved by the application example to the port of Busan to make the contingency plan. (2) Responsible oil spill contingency planning methods / flow are suggested considered environmental factors and the oil spill potential. (3) The coastal waters of Busan was consist of rocky flat, man-made solid shore and beach shore. Marine traffic have high density of oil tanker and cargo ship. Also, oil tanker ship are examined in the small ships to be less than 3000t to supply oil to the ship moored / anchored as well as the large amount of oil tank / basin are located along the coast of Busan port. These systems are introduced to make in put data to the analysis of oil spill potential. (4) According to the analysis of historical records of oil spill accident in Busan, the frequency of accidents by cargo ship rank highest and 45% of accidents is caused by carelessness. about 65% of total accidents shows a small spill accident of less than $10k{\ell}$.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.4
• /
• pp.406-413
• /
• 2011

Recently the fuel cell has been spotlighted as a technology to reduce greenhouse gases emission from a ship. In this research, internal reforming 500kW solid oxide fuel cell stacks fueled by methane for a ship were developed. Characteristics of power and efficiency depending on the number of cells in the stack, hydrogen conversion ratio, and active area of the cell are evaluated. Also the effects of air and methane supplying conditions on performance are analyzed. As a result, as the number of cells, hydrogen conversion ratio, active area of the cell, or supplied air flow rate increase, the stack power and efficiency increase. When the methane flow rate increases, the power increases. However the efficiency decreases. In addition, the case at the current of 976.4 A, voltage of 529.1 V, with corresponding power of 516.6 kW shows that the efficiency of fuel cell stack is 42.91%.

• Journal of Navigation and Port Research
• /
• v.33 no.4
• /
• pp.289-294
• /
• 2009

The living performances of crews and passengers in cabins have been less received attention, while Korea is a top leading country in ship building industry. To develop a high value added ships like 5-star cruisers, researches on the comfort and productivity in cabins should be carried out with urgent. The purpose of this study is to measure and analyze of the ship's indoor thermal conditions in spring, summer and winter, and also to compare the seasonal differences, of which conditions are supplied from and controlled by marine HVAC The temperature, humidity and air supply volume of 5 different needs of cabins on a training ship were measured through a year, which was launched at Dec. 2005 and totally 246 crews can go on board for education. The following results were obtained: (1)In the spring, the temperature in cabins was measured as $20{\sim}25^{\circ}C$ and humidity was below 30%. (2)In the summer, the temperatures was controlled at $21{\sim}27^{\circ}C$ in almost cabins and humidity was between $40{\sim}60%$ which is known as comfort conditions. (3)In the winter, temperature and humidity was maintained between $19{\sim}26^{\circ}C$, and humidity was between $10{\sim}50%$. (4)It is clear that the humidity conditions in cabins are not properly controlled at all through a year to satisfy the Comfort Standards provided by ASHRAE and/or ISO, In conclusion, humidification and dehumidification of cabins must be treated with importance for more comfort living and working environments for crews and passengers.

• Korean Journal of Computational Design and Engineering
• /
• v.15 no.6
• /
• pp.425-439
• /
• 2010

The current challenge with which most shipyards are forced is to reduce the design time and the time-to-delivery because of explosive order of shipbuilding. Collaborative design and product data management have become important to reduce the lead time. Furthermore, enterprise information technologies such as ERP (Enterprise Resource Planning), SCM (Supply Chain management), and APS (Advanced Planning System) requires the collaborative environment. Also, manufacturing environment has been considered as a topic of strategic interest to get shorter product lifecycles in shipyards. Most shipyards have chosen an environment of ETO (Engineering To Order) strategy which designs and produces new products in response to various requirements of customer, rules and regulations. In the ATO (Assemble 10 Order) environment, most component parts have been designed to be procured or produced on the order requirement. The basic distinction between the ETO and ATO is the timing of the design. Thus in the ATO environment, it is more flexible in reducing the lead time to meet the specified requirements of customers. However, the ETO strategy requires new ship design process and ship product structures that are linked with the implementation of PLM. And, the function and architecture of current PLM solution has been designed based upon ATO environment properly. This paper presents the PLM architecture which effectively reflects the characteristics of shipbuilding. 4-layer architecture model is suggested to implement the PLM system. Also, implemented functions of ship PLM is explained in order to make a practical guidance for ship PLM implementation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.3
• /
• pp.537-545
• /
• 2009

Though there were many research and development about telemedicine on land recently, not yet applied to that on the shore. In this paper, when emergency clinic situation were generated in a ship on shore, the telemedicine system was designed and implemented for transfer and clinic service to doctors on the land by measuring basic body signals of patients. Presently, wireless communication and inmarsat telephone are usually used by simple questions and clinic consults to remote doctors when emergency situation were happened in the ship. In this paper, the telemedicine system on the shore were developed for improving this problems by measuring patient's fundamental conditions such as the blood pressure, pulse, the respiratory condition, electrocardiogram, body temperature, patient image and sending these information to remote doctors on land for more accurate prescription. The developed system can supply the high level clinic service to emergency patients on the shore and cope with the emergency situation in ship.