• 지구물리와물리탐사
• /
• 제9권1호
• /
• pp.108-113
• /
• 2006

일반적인 물리탐사기법은 도심지 내에서 구조물, 전도성 지하매설물, 차량 등 인공 잡음으로 인하여 그 적용성에 많은 제약을 받는다. 특히 이 과업은 철도가 운행 중인 철로 하부의 지반 정보의 획득을 목적으로 하는데, 이를 위한 일반적인 물리탐사 적용이 어려웠으며 그 대안으로 선형배열 상시진동 탄성파탐사를 적용하였다. 상시진동 탐사(mircotremor survey)기법에는 철로를 운행하는 기차와 주변 도로의 차량에 의한 진동이 오히려 양호한 송신원으로 활용 될 수 있다. 선형배열 상시진동 탐사기법에서는 일반적인 굴절법 장비를 이용하여 일상적인 진동을 기록하고, 파동장의 변환을 수행하여 표면파의 분산곡선을 얻는다. 이후 발췌한 분산곡선에 대한 반복적인 수치모델링을 통하여 전단파 속도를 구한다. 이 과업에서는 기존 철로를 따라 하부의 터널심도까지의 전단파 속도를 전체 터널구간에 대하여 얻기 위하여 40 m 간격으로 선형배열을 이동하면서 자료를 획득하였다. 측선상의 시추를 통하여 회수한 코어를 이용한 실내시험을 통한 RMR 의 구성요소 중 하나인 일축압축강도와 전단파 속도와의 높은 상관관계를 확인하여 RMR이 전단파 속도와 연관성이 있음을 유추할 수 있었다. 시추공에서 수행한 SPS 검층에서 획득한 전단파 속도와 RMR의 비교한 결과 전단파 속도와 RMR이 높은 상관관계에 있음을 확인할 수 있었다. 상시진동 탐사기법을 통하여 획득한 전단파 속도 역시 RMR과의 양호한 상관관계를 나타냄을 알 수 있었다. 이러한 상관관계를 이용하여 도심지 철도터널 전체 구간에서 터널 설계시 필수적인 암반분류를 위한 RMR 추정이 가능하였다.

• 한국지진공학회논문집
• /
• 제18권2호
• /
• pp.89-94
• /
• 2014

Spatial variations of a seismic wave are mainly wave passage and wave scattering. Wave passage effect is produced by changed characteristics of exciting seismic input motions applied to the bedrock. Modified input motions travel horizontally with time differences determined by apparent shear wave velocity of the bedrock. In this study, wave passage effect on the seismic response of a structure-soil system is investigated by modifying the finite element software of P3DASS (Pseudo 3-Dimensional Dynamic Analysis of a Structure-soil System) to apply inconsistent (time-delayed) seismic input motions along the soft soil-bedrock interface. Study results show that foundation size affected on the seismic response of a structure excited with inconsistent input motions in the lower period range below 0.5 seconds, and seismic responses of a structure were decreased considerably in the lower period range around 0.05 seconds due to the wave passage. Also, shear wave velocity of the bedrock affected on the seismic response of a structure in the lower period range below 0.3 seconds, with significant reduction of the seismic response for smaller shear wave velocity of the bedrock reaching approximately 20% for an apparent shear wave velocity of 1000m/s at a period of 0.05 seconds. Finally, it is concluded that wave passage effect reduces the seismic response of a structure in the lower period range when the bedrock under a soft soil is soft or the bedrock is located very deeply, and wave passage is beneficial for the seismic design of a short period structure like a nuclear container building or a stiff low-rise building.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2007년도 공동학술대회 논문집
• /
• pp.237-240
• /
• 2007

The evaluation of shear modulus (or shear wave velocity) profile of site is very important in the various fields of geotechnical engineering. To obtain shear wave velocity profile, various in-situ seismic methods using surface waves have been developed. These surface wave based in-situ seismic methods have their own strength and weakness. In this study, new seismic site characterization method using the harmonic wavelet analysis of wave (HWAW) was proposed to overcome some of weaknesses in the existing surface wave based seismic site characterization methods. HWAW method which is based on time-frequency analysis using harmonic wavelet transform have been developed to determine phase and group velocities of waves. In order to estimate the applicability of HWAW method, field tests were performed. Through field applications and comparison with other test results, the applicability of the proposed method were verified.

• Geomechanics and Engineering
• /
• 제3권3호
• /
• pp.189-206
• /
• 2011

Amplification based on empirical relations is widely used for seismic microzonation of urban centers. Amplifications are used to represent the site effects of a particular soil column. Many empirical correlations are available to estimate the amplification of seismic waves. These correlations are based on the ratio of shear wave velocity of foundation/rock to soil velocity or 30 m equivalent shear wave velocity ($Vs^{30}$) and are developed considering deep soil data. The aim of this work is to examine the applicability of available amplification relations in the literature for shallow engineering bedrock sites by carrying out site response studies. Shear wave velocity of thirteen sites having shallow engineering bedrock have been selected for the study. In these locations, the depth of engineering bedrock (> 760 ${\pm}$ 60 m/s) is matched with the drilled bore hole. Shear wave velocity (SWV) has been measured using Multichannel Analysis of Surface Wave survey. These sites are classified according to the National Earthquake Hazards Reduction Program (NEHRP) classification system. Amplifications for an earthquake are arrived for these sites using empirical relations and measured SWV data. Site response analysis has been carried out in SHAKE using SWV and using synthetic and real earthquake data. Amplification from site response analysis and empirical relations are compared. Study shows that the amplification arrived using empirical relations does not match with the site response amplification. Site response amplification is much more than empirical values for same shear wave velocity.

• 한국지반공학회논문집
• /
• 제20권6호
• /
• pp.51-59
• /
• 2004

공학적 물성치로서의 저변형율에서의 전단탄성계수의 결정은 다양한 토목분야에서 매우 중요하다. 본 논문에서는 저변형율에서의 전단탄성계수를 결정하기 위하여 개발된 HWAW(Harmonic Wavelet Analysis of Wave)방법을 이용한 지반조사기법의 실제 현장에서의 타당성을 검증하기 위하여 두 곳의 현장에 HWAW방법을 적용하였다. HWAW방법을 검증하기 위하여 동일한 현장에서 수행된 SASW시험과 PS-Suspension Logging 실험의 결과와 비교하였다. 이를 통하여 HWAW방법이 배경잡음과 지반의 횡방향 불균일성에 의한 오류를 기존 방법에 비하여 최소화 할 수 있으며, 국부적이며 정밀한 대상지반의 실제 전단파 속도 주상도를 매우 효과적으로 결정할 수 있음을 확인할 수 있었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.1110-1116
• /
• 2010

Void ratios are one of the key parameters for exact calculation of settlement of soft groundse. In the study, shear wave velocities of a soft ground were used to measure the field void ratio using bender elements sensors. The bender-element probes were installed in situ at the depths of 3, 5 and 8m on a pre-loading site near Incheon, Korea. During 90 days after installation, the changes of shear wave velocity and ground surface settlement were measured. The field void ratio was estimated from measured shear wave velocities. The void ratio estimated by the shear wave velocity measured by bender elements agrees well with the measured values in the field.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.134-141
• /
• 2008

To evaluate the engineering properties of soil, the laboratory test always is carried out using samples obtained from the field. There are many studies to estimate the effect of sampling disturbance. The objective of this study appraises the disturbance using the shear wave velocity. The new shelby tube which three transducers are installed every 20cm interval is used. To laboratory tests, the large-scale consolidometer (calibration chamber) is used. During 1cm penetration, the shear wave velocity is measured by every transducer. The initial sampling disturbance is assessed through the velocity difference from bottom to right upside transducer. After finishing the sampling, the velocity is still measured every time to assess the soil disturbance in shelby tube itself. Through the measured velocity, the effect of disturbance is appraised. This study suggests that the sampling disturbance of shelby tube is effectively evaluated using shear wave velocity.

• 지구물리
• /
• 제9권3호
• /
• pp.231-240
• /
• 2006

The crustal structure of the Korean Peninsula was investigated by analyzing phase velocity dispersion data of Rayleigh waves. Earthquakes recorded by three component broad-band velocity seismographs during 1999-2004 in South Korea were used in this study. The fundamental mode Rayleigh waves were extracted from vertical components of seismograms by multiple filter technique and phase match filter method. Phase velocity dispersion curves of the fundamental mode signal pairs for 14 surface wave propagation paths on the great circle in the range 10 to 80 sec were computed by two-station method. Treating the shear velocity of each layer as an independent parameter, phase velocity data of Rayleigh wave were inverted. All the result models can be explained by a rather homogeneous crust of shear-wave velocity increasing from 2.8 to 3.25 km/sec from top to about 33 km depth without any distinctive crustal discontinuities and an uppermost mantle of shear-wave velocity between 4.55 and 4.67 km/sec. Our results turn out to agree well with recent study of Cho et al. (2006 b) based on the analysis of seismic background noises to recover short-period (0.5-20 sec) Rayleigh- and Love-wave group velocity dispersion characteristics.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.338-345
• /
• 2005

Recently, surface-wave methods have been widely used for site investigation due to economic advantage and improved reliability. Specially, the Spectral-Analysis-of-Surface-Wave (SASW) method has been used to evaluate soil properties in geotechnical engineering. In determination of subgrade stiffness by SASW measurements, only the vertical Rayleigh waves have been used. This study proposed a framework to determine shear-wave velocity profiles by using vertical and horizontal Rayleigh waves and Love wave all together. In addition, the Common-Array-Profiling(CAP) SASW method was employed, which subgrade stiffness of profile the local material under two fixed receivers. The procedure proposed in this study was verified by comparing the shear-wave velocity profiles with the shear-wave velocity profiles of downhole testing at two geotechnical sites.

• 자원환경지질
• /
• 제52권6호
• /
• pp.555-560
• /
• 2019

중국 지역 4개 지진에서 발생한 2~30초 범위의 레일리파를 이용하여 북한 지역의 1차원 전단파 속도구조를 구하였다. 레일리파는 남북한의 국경선 인근에 위치한 5개의 광대역 관측소(BRD, SNU, CHNB, YKB, KSA)에 양호하게 기록되었다. 다중필터분석를 이용하여 레일리파 기본모드 군속도가 계산되었고 이는 다시 위상부합필터를 적용하여 개선되었다. 2.9~3.2 km/s의 범위에 이르는 평균 분산곡선을 역산하여 전단파 속도를 구하였다. 지진원으로부터 BRD 관측소의 경로에서 추출된 4~6초 주기의 상대적으로 느린 군속도는 서해 서한만분지의 퇴적층군과 연관되었을 가능성이 있다. 14~20km의 상대적으로 깊은 지역 전단파 저속도층은 평남분지와 관련된 것으로 생각되며 낭림육괴와 평남분지에 분포하는 변성암 및 화강암체는 표면부터 14km 깊이의 빠른 전단파 속도와 일치한다.