• Title/Summary/Keyword: Shattering

Search Result 102, Processing Time 0.03 seconds

Genetic Variance and Combining Ability of Shattering and Growth Characters by Diallel Crosses of Sesame (이면교잡에 의한 참깨의 탈립성 및 생육형질의 유전변이와 조합능력)

  • Kim, Dong-Hwi;Kang, Chul-Whan;Shim, Kang-Bo;Park, Chang-Hwan;Lee, Sung-Woo;Seong, Nak-Sul
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.51 no.7
    • /
    • pp.652-657
    • /
    • 2006
  • Combining ability and heterosis for $F_{1}$ population obtained $5{\times}5$ half diallel cross in sesame were estimated for six quantitative characters. The parental varieties used for diallel cross were Yangbaek and Ansan of normal type, Suwon 177 and 195 of placenta adhesion type (PA) and SIG960320-5-1-1 of indehiscent type (ID). PA and ID type are shattering-resistant sesames and Yangbaek and Ansan are shattering sesames. The high heterosis of $F_{1}$ hybrids was expressed in the number of capsules per plant (NC), grain yield per plant (GY) and number of branches per plant (NB). Shattering.ate (SR) showed high positive heterosis toward increase of seeds shattering in all the combination of $F_{1}$ generation which was presumed because the characters connected with shattering resistance of seeds were governed by recessive gene. At the analysis of combining ability, highly significant general combining ability (GCA) effects were observed on all the characters in $F_{1}$ generation, significant specific combining ability (SCA) effects were observed on the NC, GY and SR. GCA variances were greater than SCA variance, which suggested that additive gene effects were greater than other nonadditive gene effects. Considering the estimated GCA effects, Suwon 195 (PA type) was found to be good parent for SR and GY, SIG960320-5-1-1 (ID type) was poor for GY and plant height. SCA effect for NC was great in Yangbaek/Suwon 195, SCA for GY was great in Ansan/SIG960320-5-1-1, and SCA for decrease of SR was great in Ansan/Suwon177.

Shattering Ratio of Manganese Nodule and Physical Properties of Powdered Manganese Nodule and Sea eottom Sediment (망간단괴의 분화율과 망간단괴 분말 및 해저퇴적물의 물리적 특성)

  • Choi, Hun-Soo;Kang, Jung-Seock;Chang, Se-Won;Koh, Sang-Mo;Um, In-Kwon
    • Journal of the Mineralogical Society of Korea
    • /
    • v.20 no.4
    • /
    • pp.277-287
    • /
    • 2007
  • To understand the effects of the powdered manganese nodule and sea bottom sediment pumped up with nodules on the mining process, the shattering ratio of manganese nodule and their physical properties are analyzed. The self shattering ratio and crushing shattering ratio are about 27% and about 3%, respectively. Then total shattering ratio is about 30%. The initial turbidity of the powdered manganese nodule and the bottom sediment show high, i.e., about 3,100 and 1,850 respectively. But their turbidities decrease rapidly with time. After 1 hour, turbidity of the powdered manganese nodule drops to about 1,570 and that of the bottom sediment to 1,310. The turbidity of Na-bentonite changes from 820 to 730 after 1 h and to 700 after 2 h. The viscosity of powdered manganese nodule is $1.4{\sim}1.5cP$, and the viscosity of bottom sediment is less than 1 cP. The viscosity fo Na-bentonite is initially 37.2 and increase with time to 86.4 cP after 30 min. The high initial turbidity of powdered manganese nodule is due to dark color of the powder. The high specific gravity makes rapid precipitation and then decreases the turbidity rapidly. The bottom sediment shows high initial turbidity because of easy suspension with very fine particle size. But it cannot be hydrated and formed gel in suspension, then it is easily precipitated. However Na-bentonite is hydrated to the expended state and makes gel state, then it shows high turbidity and high viscosity. These physical properties of the powdered manganese nodule suggest that the powder of manganese nodule should not make scaling inside of lifting pipe or pump. And the bottom sediment lifted up with manganese nodule should not play the role of drilling mud shch as Na-bentonite.

Seed Production Studies in Italian ( Lolium Multiflorum Lam. Italicum ) II. Moisture content , seed weight , shattering and germination in ripening process of Italian ryegrass (이탈리안 라이그라스의 종자생산에 관한 연구. 제2보. 사배체 품종의 종실발달에 따른 천립중 , 탈립 , 발아율 및 수분함량의 변화)

  • 류종원;강정훈;박병훈
    • Journal of The Korean Society of Grassland and Forage Science
    • /
    • v.5 no.1
    • /
    • pp.79-83
    • /
    • 1985
  • This experiment was carried out in order to determine the optimum harvesting time of tetraploid Italian ryegrass. Moisture content, 1000-seed weight, germination and seed shattering were investigated at six harvesting times after anthesis in 1984 at Suweon. The results are summarized as follows; 1. Seed moisture content was slowly decreased until 24 days and fastly decreased from 24 days after anthesis. The daily mean moisture loss during the ripening period was about 1.5 percentage. 2. The maximum 1000-seed weight was reached at 24 days after anthesis and 1000-seed weight of Waseking was heavier than that of Giant. 3. Shattering began at 17-20 days after anthesis and thereafter rapidly increased. 4. Germination was 50% at 10 days after anthesis and maximum germination was reached at 24 days. 5. Considering germination, 1000-seed weight and shattering, the optimum harvest time was 24 to 27 days after anthesis. At this time, moisture content was 55.0 to 43.5 percent and two to five seeds per ten spikes were shed by shaking at the vertical point.

  • PDF

Effect of Meteorological Condition during Ripening on the Grain Shattering of Rice Plant (등숙기 기상조건이 벼알의 탈립성에 미치는 영향)

  • J. C. Shin;Y. W. Kwon;C. J. Chung
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.27 no.3
    • /
    • pp.229-234
    • /
    • 1982
  • Environmental factors are known in general to influence much on the development of abscission layer and thereby on shedding of plant parts. The present study was carried out to determine the effect of meterological condition during ripening on the grain shatterability of rice plants at harvest. Different meteorological conditions were obtained by shifting transplanting timing of 40 days old rice seedlings 4 times with a 15 days-interval. Grain shatterability was measured as tensile strength of rice grains: it varied within a range of 214g. to 251g. in a practically non-shattering Japonica variety'Jinheung' and l27.5g. to 204g. in an easy shattering Indica \times Japonica progeny variety'Taeback'. In view of field loss of rice, the variation in tensile strength with time of transplanting and harvest did not matter in Jinheung, but was an important factor in Taeback. In Taeback the tensile strength was significantly correlated positively with mean, maximum and minimum air temperature and relative humidity during a certain period of grain ripening, especially during 30 days period before harvest, but diurnal range of air temperature showed a significant, negative correlation with it. The tensile strength seemed to be more closely related with min. air temperature than max. air temperature, and it was not significantly correlated with radiation amount during any period of pre-harvest. Meteorological effect on grain shatterability may vary with variety, but temperature regime during ripening appears to play major role among the meteorological factors in easy shattering and more thermophilic Indica \times Japonica varieties: lower the temperature, greater the shatterability.

  • PDF

A Numerical Study of the Spray Characteristics of Co-axial Swirl Injector in Liquid Propellant Rocket Engine (액체로켓엔진에서 동축 스월형 분사기의 분무특성에 대한 수치적 고찰)

  • Moon Yoon-Wan;Seol Woo-Seok;Yoon Young-Bin
    • Proceedings of the Korean Society of Propulsion Engineers Conference
    • /
    • 2006.05a
    • /
    • pp.156-160
    • /
    • 2006
  • This study investigated the characteristics of spray generated by a liquid-liquid co-axial swirl injector used in a combustor of the liquid rocket engine. The linear stability analysis[1] was introduced In liquid sheet breakup and Post[2]'s collision model which considers shattering was adopted on the collision model after breakup. Every model was implemented to KIVA[3], which was adopted as solve. To validate the implemented models the cases of high and low injection velocity were calculated respectively and each result agreed well with test results.

  • PDF

The Characteristics of Rock Weathering due to Freeze-Thawing - Focused on Rhyolite, Basalt, Tuff - (동결-융해작용에 따른 암석풍화의 특성 - 유문암, 현무암, 응회암을 중심으로 -)

  • Yang, Jae-Hyuk
    • Journal of The Geomorphological Association of Korea
    • /
    • v.25 no.1
    • /
    • pp.47-65
    • /
    • 2018
  • Frost shattering has traditionally been considered as one of the most effective process in rock weathering. Each slab specimens of five or six rhyolite, basalt and tuff was prepared and put in freeze-thaw cycles and repeated 300 times in the temperature of $-25^{\circ}C$ to $+30^{\circ}C$ and their weathering patterns and products were analyzed by surface observation, particle size, XRD and thin section. As the result, some changes were observed in weathering patterns and weathering products. Rock shattering was more active in waterlogging rather than atmospheric conditions, but there are many differences depending on the type of rock. Rhyolite is hardly weathered by 300 times freeze-thaw cycles and generates the least amount of weathering products. Weathering of Basalt is limited to the surface layer where water can be absorbed, and produces a few amount of platy-shape debris. Tuff are separated by blocky structure which the particles are aggregated along their edges rather than enlarged existing cracks/joins or generated new joints.

Agricultural and Sprouts Characteristics of Mung Bean (Vigna radiata L.) Cultivated in Southern Areas According to Sowing Dates (파종시기에 따른 남부지역 재배 녹두의 생육 및 나물특성 변화)

  • Ji Ho Chu;Byeong Won Lee;Yeong Kwang Ju;Ju Seong Im;Seok Bo Song;Myeong Eun Choi;Ji Young Kim;Sang Ik Han
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.68 no.4
    • /
    • pp.327-334
    • /
    • 2023
  • The cultivation period of mung beans (Vigna radiata L.) in Korea has undergone recent variations. However, limited research has been conducted on pod shattering and sprout characteristics of mung beans on different sowing dates. This study aims to compare pod shattering and sprouts productivity based on different sowing dates. The research was was conducted with six different sowing dates (early May, mid-May, early June, mid-June, early July, and mid-July) in 2021 and 2022. Delayed sowing dates resulted in shortened days to germination, flowering time, and maturity time, whereas plant height, branch number, and node number increased. In addition, stem thickness and the number of pods per plant decreased. In the mung bean cultivar 'Sanpo', the pod shattering rate ranged from 10.0% to 19.3%, consistently lower than that of 'Dahyun' across all six sowing dates. The sowing date associated with the lowest shattering rate was early June. 'Sanpo' sown in early July and 'Dahyun' sown in mid-May exhibited the highest sprout production, at 871% and 750%, respectively.