• 대한소아치과학회지
• /
• 제33권3호
• /
• pp.429-437
• /
• 2006

치과치료에서의 심미성 회복에 대한 환자들의 요구는 점차 커지는 추세이며 이러한 치아의 심미적 치과치료에 대한 요구는 영구치에 국한된 것이 아니라 최근에는 유치에서의 심미치료도 중요하게 여겨지고 있다. 치아의 심미성을 결정하는 많은 요소들 중에서 색상과 관련해서는 치과재료의 발달과 함께 많은 변화가 있는 분야이다. 본 연구는 상악 유절치의 색조특성을 분석하고자 digital shade analysis system의 일종인 $ShadeScan^{TM}$ system(Cynovad, Canada)을 이용하여 건강한 상악 유절치의 색조를 분석하였다. 1. 치경부에서는 D2와 D3가 많이 분포되어 있었으며 모든 치아에서 D2가 가장 높은 빈도수를 보였다. 2. 중앙부에서는 C1, D2, B1이 대부분을 차지하였으며 상악 좌측 유측절치를 제외한 나머지 치아에서 C1이 가장 높은 빈도를 보였고 상악 좌측 유측절치는 D2가 가장 높은 빈도를 보였다. 3. 절단부에서는 A2가 대부분을 차지하였으며 다음으로 D2가 많았다. 모든 치아에서 A2가 가장 높은 빈도를 보였으며 다른 부위에 비하여 색조가 A2에 편중되는 경향을 보였다.

• 아시안잔디학회지
• /
• 제5권1호
• /
• pp.23-32
• /
• 1991

The purpose of this study was to determine the vegetative growth of two cool season turfgrasses during summer season in Korea. Ten respective cultivars of Kentucky bluegrass [Poapratensis L.] and perennial ryegrass [Lolium perenne L.] were exposed to unshaded, 30% and 60% shade for 4odays. First mowing height was 7cm, and then clippings were harvested every ten days at the same height. Shading increased the total length of clippings of all cultivars of two turfgrasses, but fresh and dry weight were significantly decreased. The highest shoot length obtained at 30% shade in Kentucky bluegrass and at 60% shade in perennial ryegrass. 'Rugky', 'Sydsport', 'Wabash' and 'Baron' of Kentucky bluegrass and 'Repel', 'Omega II', 'Ovation', 'Linn', 'Bell' and 'Manhattan' of perennial ryegrass showed relatively high tolerance to shade. Especially, in 'Citation II' perennial ryegrass, fresh and dry weight were increased by 30% shade. The number of tillers generally decreased with increasing shade. In 30% shade, 'Midnight' Kentucky bluegrass and 'Omega II' perennial ryegrass were least reduced and 'Baron' Kentucky bluegrass and 'Pennant' perennial ryegrass were most reduced. The cultivars of lower growth habit in full sunlight showed shade tolerance compared to those of higher growth habit.

• Journal of Ginseng Research
• /
• 제14권1호
• /
• pp.36-43
• /
• 1990

The quality of raw, red and white ginseng and the contents of some minerals were examined using 6-year-old ginseng roots produced in different shades, thatch and polyethylene net (P..E.). The yield of first and second grade ginseng roots was higher in the thatch shade than in the P.E. shade. The smaller sizes of ginseng routs were probably due to loss of ginseng yield called by alternaria blight in the third and fourth years, and lower quality was dale to more rusty roots in the P.E. shading. For red ginseng. rates of heaven and earth grades were higher in the P.E. than thatch shade. producing red ginseng with less inside cavity Production of white ginseng was higher in the thatch shade than in the P.E. shade. showing a higher yield, better piece grade, lower inside crack and better quality index in the thatch. The contents of some minerals such as K, Ca, Mg and Mn of fine ginseng roots differed between the two shades, some of which had a significant correlation with the quality indices of white ginseng. Keywords Thatch shade, polyethylene shade, alternaria blight, rulsty root, quality of ginseng.

• 대한치과보철학회지
• /
• 제46권4호
• /
• pp.343-350
• /
• 2008

연구목적: 본 연구에서는 한국인의 상하악 전치부간의 색조차이를 상하악 치아 순면의 정중부의 색조를 분광측색장치 (Spectrophotometer)를 이용하여 CIE $L^{*}a^{*}b^{*}$ 색체계로 비교분석을 하여, 실제 한국인의 상하악 전치부간의 색조차이에 관하여 알아보고 자 하였다. 연구대상 및 방법: 수복물이 없으며 치주적으로 건강한 정상적인 치관부의 형태의 상하악 12전치를 가진 20대, 30대, 40대, 50대 이상 10명씩 남녀 각 40명씩 총80명을 대상으로 색조 측정을 시행하였다. 연구재료: $SpectroShade^{TM}$ MICRO (MHT S.p.A., Italy) 디지털 색조 분석 기구로서 대상 치아의 디지털 영상을 채득하여 이를 기계 내에 포함된 색조 분석시스템을 통해 shade map의 형태로 입력 분석하여 주는 장치이다. 결론: 1. 전치부 상, 하악 치아간 색조차이는 중절치, 측절치, 견치 모두에서 ${\Delta}E^{*}$가 보다 큰 것으로 나타났다. 2. 상, 하악 견치 간 색조차이는 중절치, 측절치 간의 색조차이보다 더 두드러지고 중절치간 측절치간 색조차이 정도는 유사한 것으로 나타났다. 3. 남녀 성별에 따른 상, 하악 치아 간의 색조차이는 그 정도가 유사한 것으로 나타났다. 4. 각 연령대에 따른 상, 하악 치아간 색조차이의 정도는 연령대와 상관없이 유사한 것으로 나타났다.

• 원예과학기술지
• /
• 제32권4호
• /
• pp.473-483
• /
• 2014

In this work, the effects of shade combination, shade height and wind regime on greenhouse climate were quantified. A two-dimensional (2-D) computational fluid dynamics (CFD) model was developed based on an 11-span plastic greenhouse in eastern China for wind almost normal to the greenhouse orientation. The model was first validated with air temperature profiles measured in a compartmentalized greenhouse cultivated with mature lettuce (Lactuca sativa L., 'Yang Shan'). Next, the model was employed to investigate the effect of shade combinations on greenhouse microclimate patterns. Simulations showed similar airflow patterns in the greenhouse under different shade combinations. The temperature pattern was a consequence of convection and radiation transfer and was not significantly influenced by shade combination. The use of shade screens reduced air velocity by $0.02-0.20m{\cdot}s^{-1}$, lowered air temperature by $0.2-0.8^{\circ}C$ and raised the humidity level by 0.9-2.0% in the greenhouse. Moreover, it improved the interior climate homogeneity. The assessment of shade performance revealed that the external shade had good cooling and homogeneity performance and thus can be recommended. Furthermore, the effects of external shade height and wind regime on greenhouse climate parameters showed that external shade screens are suitable for installation within 1 m above roof level. They also demonstrated that, under external shade conditions, greenhouse temperature was reduced relative to unshaded conditions by $1.3^{\circ}C$ under a wind speed of $0.5m{\cdot}s^{-1}$, whereas it was reduced by merely $0.5^{\circ}C$ under a wind speed of $2.0m{\cdot}s^{-1}$. Therefore, external shading is more useful during periods of low wind speed.

• 대한치과보철학회지
• /
• 제44권4호
• /
• pp.455-465
• /
• 2006

Statement of problem: Many factors influence shade determination in clinical practice and shade matching is highly affected by the viewing conditions. Purpose : This study investigated the differences in shade perception among distinct groups of dental personnel (10 prosthodontists, 10 general practitioners, 10 last-year dental students and 10 dental technicians) Material and method: Four groups of dental personnel were investigated. They were tested to eliminate color blindness. To compare shade selection ability, they were asked to match four test tabs of shades A3, B2, C2 and D4 (VITAPAN$^{(R)}$ Classical shade guide. The identification codes of the shade tabs were masked to prevent shade memory. ) against another full set of VITA$^{(R)}$ PAN$^{(R)}$ Classical shade guide under similar lighting conditions. Shade selections were randomly repeated five times every week and then the repeatability between dental personnel was evaluated. To compare value perception ability, they were asked to arrange randomly selected five test tabs (Bl, A2, D2, C3, A4) in descending order from the brightest to the darkest. To compare hue determination ability, they were asked to divide selected eight test tabs (n, A3, B2, B3, C2, C3, D2, D3) into four groups by manufacturer as follows : Group A-Reddish brown, Group B-Reddish yellow. Group C-Grey. Group D-Reddish grey. Results and conclusion : The obtained results were as follows : 1. For the value perception ability and hue determination ability. there was no significant difference among 4 groups: prosthodontists, general practitioners, dental students, dental technicians (P>.05). 2. For shade selection ability, the prosthodontists and dental technicians were significantly higher than dental students(P<.05). 3. The repeatability of selected shade in the dental technicians was significantly higher than that of general practitioners and dental students(P<.05). 4. The prosthodontists and dental technicians had significantly higher selection ability than dental students for shade B2 (P<.05).

• 대한치과보철학회지
• /
• 제43권3호
• /
• pp.314-321
• /
• 2005

Objectives. The purpose of this study was to compare the shade changes in wet and dry conditions of natural teeth using two different intra-oral colorimeters. Materials and methods. Twenty volunteer subjects have no restorations and fillings in the maxillary central incisors were involved in this clinical study. The color of tooth was measured by two different instruments that were a Shade $Scan^{TM}$ System and a VITA $Easyshade^{(R)}$, Five times consecutive measurements were done for each subject with both instruments. Groups of measurement are an initial wet condition as control, dry in 5 minutes, 15 seconds after re-wetting with saliva, re-wetting after 5minutes and re-wetting after 30 minutes. Using ShadeScan $System^{TM}$, tooth image was captured and converted to the mapping image of Vitapan 3D master. Three main shades were chosen from each subject and calculated the area in Global Lab Image software. Data were analyzed using paired T-Test and Wilcoxon Signed Ranked Test. Using VITA $Easyshade^{(R)}$, color differences($\Delta$E) between measurements were analyzed with one sample T-test. Results. Using ShadeScan $System^{TM}$, there were significant differences between control group and dry(P=.023), dry and re-wetting 15 seconds, 5 minutes, 30 minutes as well(P=.021, P=.017, P=.030) in comparison of primary shade. However, comparing three main shades, there was no significant difference between control and dry(P=.105). Using VITA $Easyshade^{(R)}$, color differences($\Delta$E) between control and dry, dry and re-wetting 30 minutes were statistically different(P=.002, P=.022). Conclusion. Primary shade could be changed in dry and wetting procedure in time, however there was no significant shade changes in overall.

• 대한소아치과학회지
• /
• 제51권2호
• /
• pp.176-184
• /
• 2024

This study aimed to compare color matching between single-shade composite resin-restored teeth with various pulp capping materials and the dentin surrounding the restoration through instrumental analysis and visual evaluation of the color difference. Fifty maxillary right central incisor acrylic resin teeth were prepared with standardized Class III cavities on the proximal surfaces. These teeth were divided into five groups: restored with single-shade composite resin only; Ultra-Blend^TM plus followed by single-shade composite resin; TheraCal PT^TM followed by single-shade composite resin; Endocem^® MTA premixed followed by single-shade composite resin; and Well-root PT^TM followed by single-shade composite resin. The color difference (ΔE_ab^*) between the restored area and the center of the resin teeth was measured using a spectrophotometer. No significant color difference was observed in groups restored with only single-shade composite resin, Ultra-Blend^TM plus, and TheraCal PT^TM. The visual evaluation revealed that Ultra-Blend^TM plus exhibited the best color matching score, whereas the Endocem^® MTA premixed and Well-root PT^TM groups showed significantly lower color matching scores than the single-shade composite resin-only group. When opting for single-shade composite resin usage for anterior tooth restorations with the aim of reducing chair time, pulp capping materials Ultra-Blend^TM plus and TheraCal PT^TM provide esthetically pleasing results.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2008년도 추계학술발표대회 논문집
• /
• pp.257-262
• /
• 2008

Available daylight in inside offers comfortable view environment, and psychological and physical advantages to people in the room. But, it has a problem of an excessive direct sunlight. This study calculated daylight responsive dimming control slope by Roller Shade system with Mock-up test. With three 1/2 scale Mock-up rooms, we performed a test for calculation of daylight responsive dimming control slope in different shade height of each room through the different height of roller shade systems. This research will be used as a fundamental study for automated roller shade systems.

• Restorative Dentistry and Endodontics
• /
• 제24권2호
• /
• pp.299-309
• /
• 1999

The composite resin, due to its esthetic qualities, is considered the material of choice for restoration of anterior teeth. With respect to shade control, the direct-placement resin composites offer some distinct advantages over indirect restorative procedures. Visible-light-cured (VLC) composites allow dentists to match existing tooth shades or to create new shades and to evaluate them immediately at the time of restoration placement. Optimal intraoral color control can be achieved if optical changes occurring during application are minimized. An ideal VLC composite, then, would be one which is optically stable throughout the polymerization process. The shade guides of the resin composites are generally made of plastic, rather than the actual composite material, and do not accurately depict the true shade, translucency, or opacity of the resin composite after polymerization. So the numerous problems associated with these shade guides lead to varied and sometimes unpredictable results. The aim of this study was to assess the color changes of current resin composite restorative materials which occur as a result of the polymerization process and to compare the color differences between the shade guides provided with the products and the actual resin composites before- and after-polymerization. The results obtained from this investigation should provide the clinician with information which may aid in improved color match of esthetic restoration. Five light activated, resin-based materials (${\AE}$litefil, Amelogen Universal, Spectrum TPH VeridonFil-Photo, and Z100) and shade guides were used in this study. Three specimens of each material and shade combination were made. Each material was condensed inside a 1.5mm thick metal mold with 10mm diameter and pressed between glass plates. Each material was measured immediately before polymerization, and polymerized with Curing Light XL 3000 (3M Dental products, USA) visible light-activation unit for 60 seconds at each side. The specimens were then polished sequentially on wet sandpaper. Shade guides were ground with polishing stones and rubber points (Shofu) to a thickness of approximately 1.5mm. Color characteristics were performed with a spectrophotometer (CM-3500d, Minolta Co., LTD). A computer-controlled spectrophotometer was used to determine CIELAB coordinates ($L^*$, $a^*$ and $b^*$) of each specimen and shade guide. The CIELAB measurements made it possible to evaluate the amount of the color difference values (${\Delta}E{^*}ab$) of resin composites before the polymerization process and shade guides using the post-polishing color of the composite as a control, CIE standard D65 was used as the light source. The results were as follows. 1. Each of the resin composites evaluated showed significant color changes during light-curing process. All the resin composites evaluated except all the tested shades of 2100 showed unacceptable level of color changes (${\Delta}E{^*}ab$ greater than 3.3) between pre-polymerization and post-polishing state. 2. Color differences between most of the resin composites tested and their corresponding shade guides were acceptable but those between C2 shade of ${\AE}$litefil and IE shade of Amelogen Universal and their respective shade guides exceeded what is acceptable. 3. Comparison of the mean ${\Delta}E{^*}ab$ values of materials revealed that Z100 showed the least overall color change between pre-polymerization and post-polishing state followed by ${\AE}$litefil, VeridonFil-Photo, Spectrum TPH, and Amelogen Universal in the order of increasing change and Amelogen Universal. Spectrum TPH, 2100, VeridonFil-Photo and ${\AE}$litefil for the color differences between actual resin and shade guide. 4. In the clinical environment, the shade guide is the better choice than the shade of the actual resin before polymerization when matching colors. But, it is recommended that custom shade guides be made from resin material itself for better color matching.