• Journal of the Korean Vacuum Society
• /
• v.8 no.1
• /
• pp.1-8
• /
• 1999

A boundary condition reflecting automatically, regardless of the direction of the gas flow, the pressure drop due to the entrance and exit effect occurred at a connection of two elements with different cross-sections in calculating the pressure profile of a vacuum network composed of many chambers and pipes which have different shape and vacuum properties was developed. The method of correcting the pressure drop in an element of varying cross-section like a cone was also introduced to keep the system free from directionality. The developed boundary conditions are applied as an example to a linear composed vacuum system to show how to make a set of simultaneous equations based on the particle balance equation and how to obtain its solution.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.05a
• /
• pp.93-94
• /
• 2016

The resistance of crowd pressure is an important performance to be influential on safety of facility users among performances required for light weight walls of public facilities. This study has empirically evaluated the estimation of size of crowd pressure to be applied to a wall of structure. For the load analysis test, the force plate with stiffness of 28 kN/cm was designed and manufactured. For inspectors, 15 males in the age of 20s were selected. The action of putting load was set as instantaneous push of plate and continuous push. As the load was increased linearly from the weight of inspector, the size of load was indicated as the load ratio. In case of instantaneous force, about 1.18 times the weight of pushing personnel was acted as a load. In case of continuous push, about 0.80 times the weight of pushing personnel was acted as a load.

• Journal of ILASS-Korea
• /
• v.4 no.3
• /
• pp.42-52
• /
• 1999

An effectiveness of thermal utilization of a dousing system in the 600 MW PHWR Nuclear Power Plant has been evaluated. The behavior and conditions of water droplet sprayed in a postulated accident conditions in containment configuration has been calculated. In this calculation, two pressure conditions with the consideration of obstruction area and containment wall effect has been established : one being the minimum containment pressure of 7 kPa(g) encountered for dousing shut off and the other being the containment design pressure 124 kPa(g). The results revealed that the effectiveness of the thermal utilization ranges from 93% to 97%. In the analysis on two cases without/with side wall effect in the containment building, the thermal utilization decreases with obstruction area from 89% to 85%, which satisfies the design criteria set for the containment pressure against the accident condition.

• Transactions of Materials Processing
• /
• v.9 no.6
• /
• pp.590-597
• /
• 2000

A finite element formulation lot the simulation of axisymmetric sheet hydroforming is proposed, and an implicit program is coded. In order to describe normal anisotropy of steel sheet, Hill's non-quadratic yield function (Hill, 1979) is employed. Frictional contacts among sheet surface, rigid tool surface, and flexible hydrostatic pressure are considered using mesh normal vectors based on finite element of the sheet. Applied hydraulic pressure is also considered as a function of forming rate and time and treated as an external loading. The complete set of the governing relations comprising equilibrium and interfacial equations is approximately linearized for Newton-Raphson algorithm. In order to verify the validity of the developed finite element formulation, the axisymmetric bulge test is simulated. Simulation results are compared with other FEM results and experimental measurements and showed good agreements. In axisymmetric hydroforming processes of a disk cover, formability changes are observed according to the hydraulic pressure curve changes.

• Journal of the Society of Naval Architects of Korea
• /
• v.41 no.1
• /
• pp.23-30
• /
• 2004

In the Lagrangian vortex particle method based on the vorticity-velocity formulation for solving the incompressible Navier-Stokes equations, a numerical scheme for calculating pressure fields is presented. Implementation of the numerical method is directly connected with the well-established surface panel methods, just by dealing with the dynamic coupling among vorticity field. Assuming the vorticity and the velocity fields are to be calculated in time domain analysis, the pressure calculation for a complete set of solution at present time step is performed in a similar way to the one used in the Eulerian description. For a validation of the present method, we illustrate the early development of the viscous flow about an impulsive started circular cylinder for Reynolds number 550. The comparative study with the Eulerian finite Volume method provides an extensive understanding and application of the mesh-free Lagrangian vortex methods for numerical simulation of viscous flows around arbitrary bodies of general shape.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11b
• /
• pp.1078-1082
• /
• 2001

An alternative formulation of the Helmholtz integral equation is derived to express the pressure field explicitly in terms of the velocity vector of a radiating surface. This formulation, derived for arbitrary sources, is similar in form to the Rayleigh's formula for planar sources. Because the pressure field is expressed explicitly as a surface integral of the particle velocity, which can be implemented numerically using standard Gaussian quadratures, there is no need to use Boundary element method to solve a set of simultaneous equations for the surface pressure at the discretized nodes. Furthermore the non-uniqueness problem inherent in methods based on Helmholtz integral equation is avoided. Validation of this formulation is demonstrated for some simple geometries.

• Steel and Composite Structures
• /
• v.33 no.2
• /
• pp.245-259
• /
• 2019

The present study aims to investigate the ultimate strength and geometric nonlinear behavior of composite plates containing initial imperfection subjected to combined end-shortening strain and lateral pressure loading by using a semi-analytical method. In this study, the first order shear deformation plate theory is considered with the assumption of large deflections. Regarding in-plane boundary conditions, two adjacent edges of the laminates are completely held while the two others can move straightly. The formulations are based on the concept of the principle of minimum potential energy and Newton-Raphson technique is employed to solve the nonlinear set of algebraic equations. In addition, Hashin failure criteria are selected to predict the failures. Further, two distinct models are assumed to reduce the mechanical properties of the failure location, complete ply degradation model, and ply region degradation model. Degrading the material properties is assumed to be instantaneous. Finally, laminates having a wide range of thicknesses and initial geometric imperfections with different intensities of pressure load are analyzed and discuss how the ultimate strength of the plates changes.

• PNF and Movement
• /
• v.21 no.2
• /
• pp.185-192
• /
• 2023

Purpose: This study aimed to confirm the effectiveness of the diaphragm stretching technique as a treatment method for low back pain by evaluating maximum inspiratory pressure, maximum expiratory pressure, and changes in back mobility in patients with low back pain. Methods: Thirty-four patients with low back pain were randomly divided into two groups: an experimental group and a control group. The diaphragm stretching technique was conducted in the experimental group, and the placebo intervention was conducted in the control group. The diaphragm stretching technique was conducted once, maintaining tension for 7 min. The placebo intervention was conducted in the same position as the diaphragm stretching technique, but with only light contact maintained without pressure. Maximum inspiratory pressure, maximum expiratory pressure, and back mobility were measured before and after the intervention, and the changes were compared and analyzed. A paired sample t-test was used to compare measurements within the group before and after the intervention. An independent t-test was used to compare the experimental and control groups. Statistical significance (α) was set at 0.05. Results: In the experimental group, maximum inspiratory pressure, maximum expiratory pressure, and back mobility increased significantly after the intervention (p < 0.05). However, there was no significant difference in the changes in all areas of the control (p > 0.05). As a result of comparative analysis of changes before and after the intervention, there were significant differences in maximum inspiratory pressure, maximum expiratory pressure, and back mobility only in the experimental group (p < 0.05). Conclusion: The diaphragm stretching technique improved maximum inspiratory pressure, maximum expiratory pressure, and back mobility compared to the placebo intervention. Therefore, the diaphragm stretching technique can be recommended as a physical therapy intervention to improve pain in patients with LBP.

• Journal of Korea Water Resources Association
• /
• v.52 no.10
• /
• pp.719-728
• /
• 2019

Valve in water distribution network (WDN), that controls the flow in pipes, is used to isolate a segment (a part of WDN) under abnormal water supply conditions (e.g., pipe breakage, water quality failure event). The segment isolation degrades pressure and water serviceability in neighboring area during the water service outage of the segment. Recent hydraulic and water quality failure events reported encouraging WDN valve installation based on various abnormal water supply scenarios. This study introduces a scenario-based optimal valve installation approach to optimize the number of valves, the amount of undelivered water, and a shortest water supply path indicator (i.e., Hydraulic Geodesic Index). The proposed approach is demonstrated in the valve installation of Pescara network, and the optimal valve sets are obtained under multiple scenarios and compared to the existing valve set. Pressure-driven analysis (PDA) scheme is used for a network hydraulic simulation. The optimal valve set derived from the proposed method has 19 fewer valves than the existing valve set in the network and the amount of undelivered water was also lower for the optimal valve set. Reducing the reservoir head requires a greater number of valves to achieve the similar functionality of the WDN with the optimal valve set of the original reservoir head. This study also compared the results of demand-driven analysis (DDA) and the PDA and confirmed that the latter is required for optimal valve installation.

• Journal of Korean Academy of Nursing
• /
• v.16 no.1
• /
• pp.55-66
• /
• 1986

The effect on strength and endurance training (SET) (2 patients) were compared with those of strength training(ST) (2 patients) in patients with-chronic obstructive pulmonary disease. The result of training was assessed by 4 tests: maximal inspiratory pressure(PImax), sustainable inspiratory pressure (SIP), maximal voluntary ventiiation(MVV) and bronchitis-emphysema symptom checklist(BESC). Measurements were repeated before and after training per week for 6 weeks. The SET group performed inspiratory muscle training, using a inspiratory muscle trainer 30 minutes per day, 6 days per week and performing endurance training-12-minute walking-2 days per week for 6 weeks, whereas the ST-only group trained for 30 minutes daily, 6 days per week using inspiratory muscle trainer. SET was no significant increase in exercise performance, whereas ST produced an increase in SIP and a decrease in BESC. There was significant change in BESC betweet the two groups. A simple at home training program using inspiartory muscle trainer was more effective than that of SET program in improving exercise performance of some patients with COPD.h COPD.