• Tuberculosis and Respiratory Diseases
• /
• v.46 no.6
• /
• pp.836-845
• /
• 1999

Background : Obesity is present in the majority of adult patients with obstructive sleep apnea(OSA) and is considered to be a major risk factor for its development. A reduction in body weight has been associated with substantial improvement in the severity of apnea. However, a variety of treatment strategies for obesity have yielded limited sucess. This study was done to determine resting energy expenditure(REE) in patients with obstructive sleep apnea and the correlation between the severity of sleep apnea and REE, and to investigate whether leptin influences REE and correlated with the severity of sleep apnea in 39 patients with OSA and 45 controls matched for obesity. Method : Overnight polysomnography was performed on all subjects using standard techniques. Measurements of REE were made using a Sensormedic Vmax 229 and a canopy system. Serum leptin concentration was measured by human leptin RIA kit of LINCO Research INC. Results : REE was greater in patients with OSA compared with controls, but there was no difference between the two groups on REE%. And also there was no significant correlation between anthropometric data, polysomnographic data and REE%. Serum leptin was linearly related to body mass index(BMI), apnea index, apnea hypopnea index and lowest arterial oxygen saturation($SaO_2$) but not related to REE%. Conclusion : This study suggests the followings. Firstly patients patients with sleep apnea have a pattern of obesity characterized by energy homeostasis at an elevated body weight set-point. In order to achieve a lower body weight in these patients, it may be necessary to increase energy expenditure by increasing physical activity. Secondly leptin level was not correlated with REE, suggesting that leptin may predominantly regulate body fat by altering eating behavior rather than calorigenesis. Lastly leptin level was significantly correlated with the severity of sleep apnea. These elevated level of leptin in patients of sleep apnea may be related to the obesity, however it needs further studies to determine the relationship between the severity of sleep apnea and serum leptin.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.16 no.2
• /
• pp.59-67
• /
• 1983

An experiment on the rearing of tilapia stocked in closed recirculating tanks eliminating biological filter beds was carried out at the Fish Culture Experiment Station of the National Fisheries University of Pusan, from May 18 through October 21, 1982, and the growth rates, feed conversion, water quality, spawning prevention and space utilization efficiency were discussed. Finally discussed is the feasibility on the establishment of commercial production units. On the water quality, the water temperature ranged from $22.8^{\circ}C\;to\;29.1^{\circ}C$, and total ammonia arround 10 ppm or slightly up. Maintaining phytoplankton bloom was not successful probably because of the active consumption by the heavily stocked tilapia. Several attempts were made by changing the culture water with green water from a nearby earthen pond with results of fading-away in a couple of days. Feed conversions were relatively high ranging from 0.9 to 1.2 except for experiment 1 when the fish were not fully recovered from weakened wintering state. The feed used was partly laboratory prepared $25\%$ protein diet and mostly commercially available $39\%$ protein carp feed. Spawning was completely controlled during the experiment, resulting from density effect, which ranged from 10kg to 40.7kg per square meter with water depth of 0.5 to 0.6m. Space utilization efficiency was very high. Daily net production from the experiment division 3, which showed the highest result, was 6.206 kg per tank, which is calculated 3,235 metric tons per hectare per year, This time, water temperature ranged from 27.8 to $29.1^{circ}C$, average being $28.4^{circ}C$, and total ammonia arround 10 ppm. An estimation for the commercial set-up of the production system based on the results of experiment divisions which had initial stocking rate $15\;kg/m^2$ or up, is made. If the total facility, 8 tanks comprising $56\;m^2$ in surface area, is used for the present study, the yield would become 5,639 kg from 200 day rearing, which would be possible under double sheets vinyl house without additional heating, and it is thought feasible in the economic view point, when 10 or more units are operated.

• Journal of Korean Public Health Nursing
• /
• v.13 no.1
• /
• pp.97-113
• /
• 1999

To investigate the actual condition of the adult-smoking in Chinan County. I used self-reporting questionnaires among 923 residents living in nine districts selected at random among the sites of eleven eup-myons from December 28. 1998 to January 6. 1999. collected data and analyized using SPSS. The smoking rate of adults in Chinan County was $36.9\%$. There was a significant difference in smoking rate according to the age. gender, education and job among general characteristics. The smoking rate in group of above 40s was about $40\%$ and that of the male took $55.5\%$ which was higher than that of female and the smoking rate of the people having high-school education was the highest$(46.2\%)$. With regard to the career. the smoking rate of the farmers ranked first$(46.1\%)$. Therefore anti-smoking business for smokers should be focused on above 40 years old, males. people having high school education and farmers. As the result of the survey of smoking habits of 340 people who smoke currently, the average smoking begining age was 21.8 and $81.5\%$ among them was between 16-25 years old. $4.4\%$ was under 15. during around the elementary school. Most motives to smoke were as followed; curiosity or taste$(33.6\%)$, relief of stress $(31.2\%)$, peer presure$(26.5\%)$ And considering the amount of the cigarette which is smoked per day, the case which is less than a pack of cigarettes was highest as $75.5\%$ and the people who smoke over one pack of cigarettes took $24.5\%$. As for the kind of tobacco which is smoked, how to smoke and the desire for the smoking, most case was toxin was moderate$(47.8\%)$ or mild$(46.9\%)$. shallowly$(49.0\%)$ or deeply$(46.3\%)$ and under stress$(33.4\%)$. after meals$(27.8\%)$, during drink$(15.7\%)$ and so on. The highest point marked among the factors of smoking motives was 'the reduce of negative emotion' $(3.27\pm1.00)$. followed by 'uncomfortable habits' $(2.87\pm1.02)$, 'addiction' $(2.84\pm1.06)$. 'habit' $(2.74\pm1.12)$. 'pleasure' $(2.70\pm1.04)$. 'stimulus' $(2.59\pm.90)$, 'sensation-exercise satisfaction' $(2.42\pm.97)$. Smokers smoke to reduce the negative emotions when angry in most common case. depressed. anxious. uncomfortable. lone. ashamed or embarrased. and intend to solve the certain problem. etc. Other motives are uncomfortable habit. addiction. habit. pleasure and the pursuit of stimulus. The level of nicotine dependence of adults m Chinan County was 10.57 which amount to 'high' wholly. As the resulf of the level of nicotine dependence score. the people who are low in the level of nicotine was $33.5\%$. the people who are high was $48.2\%$. very high was $18.4\%$. The approach for anti-smoking for smokers should be conducted differently according to the level of the nicotine. For the people who are in low level of nicotin dependence the prohibition of the smoking should be guided through the approach to foster strong will. for those who are in 'high' by acquiring proper method for the prohibition of smoking. and for those who are 'very high' the anti-smoking should be induced by providing proper program because of the possibility of the suffer from abstinence syndrome. The difference of the level of nicotine with the general characteristics of the objects had not statistically significant difference. The difference of the level of nicotine dependence accompanied by smoking habit had statistically significant difference according to the amount of smoke, the kind of tobacos. smoke inhale habit. In other words, the group of heavy smokers had higher level of the nicotine dependence than that of the light smokers relatively and the group which smoke strong taboaco has higher level of nicotine than that of which smoke mild or moderate. And the group of smokers who smoke deeply has higher level of nicotine than that who smoke shallowly or nonswallow. Aa a result of the analysis of the correlation between smoking motive factors and the level of nicotine, there was the indication that people who smoke for the decrease of the negative emotion. habit, pleasure. stimulus. sensation-exercise satisfaction had high level of the nicotine dependence. As the result of the anti-smoking will of smokers. $65.0\%$ of them had prohibition of smoking will. $29.3\%$ had no will to quit smoke. The most important reason for anti-smoking was health. $67.9\%$ had experience to try to quit smoke and the biggest reason to fail to quit smoking was the lack of the will power to keep anti-smoking. $52.8\%$ of them were advised to stop smoking from their spouses or children. only $2.8\%$ were by medical. The people who have the opinion to need anti-smoking education were $69.6\%$. Therefore when the business for the hygine of the mouth for adult is set. it should be centered on the people who have intention of prohibition of the smoking and help to quit smoking by way of other affirmative counter-program not smoking under stress.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.16 no.2
• /
• pp.65-74
• /
• 2013

A research program for the roe deer (Capreolus pygargus) has been set up at the Jeju Experimental Forest of Warm-temperate and Subtropical Forest Research Center in Jeju Island. To explore the home range size and habitat environment, 3 males and 3 females have been captured and released with GPS-CDMA based telemetry since 24th April 2012. Among them 2 females were captured at Hannam Forest of Seoguipo, were pregnant and monitored by the tracking system. There are significantly different patterns in behavior around the parturition. After parturition they show recurrence behavior toward one point in the forest, while they have irregular patterns in moving before. To calculate the home range size, the MCP (minimum convex polygon) and Kernel Method are applied through the extension of ESRI ArcView GIS 3.2a. The pregnant female captured 9th May 2012 has the size of MCP=67ha and Kernel 95%=0.5ha and the pregnant female captured 12th July 2012 has the size of MCP=82ha and Kernel 95%=0.9ha. Although a fawn could move immediately just after the birth likely others to avoid any risks, they stay at very narrow space significantly, and the size become wider when more time goes by. Furthermore, they mainly have a home range away from human activity area such as forest tracking roads. The habitat environment for the parturition is summarized as 40years old cryptomeria forests with new sprouting shrubs for foods, which are the controlled forest through the thinning and removing shrubs 2 years ago. This means that forest works could cause positive results for the parturition and survival of young. The period of parturition is earlier than highland in Jeju Island, the size of home range is narrower than other countries, and the habitat environment of the shelter for a fawn is similar to previous research in other countries.

• The korean journal of orthodontics
• /
• v.34 no.2 s.103
• /
• pp.165-175
• /
• 2004

Information on the limits of treatment could allow for more rational treatment Planning and better results after treatment. From this point of view, this article has attempted to discuss the limits of orthodontic tooth movement. A relatively wider range of tooth movement is expected after Class III surgical-orthodontics than after conventional orthodontic treatment in general. The purposes of this Paper were: first, to evaluate the reliability of teeth position measuring gauge; and second, to elucidate the limits of orthodontic tooth movement. Dental casts of fifty-fine subjects were analyzed by using Set-up model checker (InVisitec Co., Korea) before and aster the Class III surgical-orthodontic treatment. The changes of maxillary and mandibular dental arch widths were also measured from the canines to the second molars. To test the inter-examiner reliability, randomly selected casts were measured by another examiner. Descriptive statistics and paired t tests were used to explain the tooth movement during treatment. The results showed a relatively good reliability of measuring instruments and a very diverse range of tooth movement. Collective changes by the orthodontic tooth movement evaluated in Class III surgical-orthodontics allowed for a suggestive interpretation of specific treatment patterns. Arch width changes during the inter-arch coordination were mainly the result of tipping in both buccal segments. Based on the results of this study, the possibility of a change in dentition as a result of orthodontic treatment should be understood in order to launch a well-organized plan of treatment.

• The Korean Journal of Air & Space Law and Policy
• /
• v.25 no.1
• /
• pp.3-26
• /
• 2010

The European Union(EU) has recently introduced its Directive 2008/101/EC to include aviation in the EU ETS(emissions trading system). As an amendment to Directive 2003/87/EC that regulates reduction of the green house gas(GHG) emissions in Europe in preparation for the Kyoto Protocol, 1997, it obliges both EU and non-EU airline operators to reduce the emission of the carbon dioxide(CO2) significantly in the year 2012 and thereafter from the level they made in 2004 to 2006. Emission allowances allowed free of charge for each airline operator is 97% in the first year 2012 and 95% from 2013 and thereafter from the average annual emissions during historical years 2004 to 2006. Taking into account the rapid growth of air traffic, i.e. 5% in recent years, airlines operating to EU have to reduce their emissions by about 30% in order to meet the requirements of the EU Directive, if not buy the emissions right in the emissions trading market. However, buying quantity is limited to 15% in the year 2012 subject to possible increase from the year 2013. Apart from the hard burden of the airline operators, in particular of those from non-European countries, which is not concern of this paper, the EU Directive has certain legal problems. First, while the Kyoto Protocol of universal application is binding on the Annex I countries of the Climate Change Convention, i.e. developed countries including all Member States of the European Union to reduce GHG at least by 5% in the implementation period from 2008 to 2012 over the 1990 level, non-Annex I countries which are not bound by the Kyoto Protocol see their airlines subjected to aircraft emissions reductions scheme of EU when operating to EU. This is against the provisions of the Kyoto Protocol dealing with the emissions of GHG including CO2, target of the EU Directive. While the Kyoto Protocol mandates ICAO to set up a worldwide scheme for aircraft emissions to contribute to stabilizing GHG concentrations in the atmosphere at a level that would prevent dangerous anthropogenic interference with the climate system, the EU ETS was drawn up outside the framework of the international Civil Aviation Organization(ICAO). Second, EU Directive 2008/101 defines 'aviation activities' as covering 'flights which depart from or arrive in the territory of a Member State to which the [EU] Treaty applies'. While the EU airlines are certainly subject to the EU regulations, obliging non-EU airlines to reduce their emissions even if the emissions are produced during the flight over the high seas and the airspace of the third countries is problematic. The point is whether the EU Directive can be legally applied to extra-territorial behavior of non-EU entities. Third, the EU Directive prescribes 2012 as the first year for implementation. However, the year 2012 is the last year of implementation of the Kyoto Protocol for Annex I countries including members of EU to reduce GHG including the emissions of CO2 coming out from domestic airlines operation. Consequently, EU airlines were already on the reduction scheme of CO2 emissions as long as their domestic operations are concerned from 2008 until the year 2012. But with the implementation of Directive 2008/101 from 2012 for all the airlines, regardless of the status of the country Annex I or not where they are registered, the EU airlines are no longer at the disadvantage compared with the airlines of non-Annex I countries. This unexpected premium for the EU airlines may result in a derogation of the Kyoto Protocol at least for the year 2012. Lastly, as a conclusion, the author shed light briefly on how the Korean aviation authorities are dealing with the EU restrictive measures.

• International Commerce and Information Review
• /
• v.13 no.4
• /
• pp.177-201
• /
• 2011

Myanmar had fallen behind other southeast asian nations since Burmese way to Socialism settled down. However, historically second election in Myanmar hold in 2011 and dramatic changes in areas such as Special Economic Zone announcement, the very huge inflows of foreign direct investment in a year of 2009, the infrastructure building projects, a permit of the right to strike for Labour Organization in Myanmar etc. Particularly, Foreign investments and trade with neighbouring countries are actively growing and also with Korea. But investments of Korea in Myanmar relatively are not diversity, with limited sectors such as mining and sewing manufacturing. In this point of view, this paper is trying to make implications for strategies of entry and investments of Korea in Myanmar by using previous papers related to Myanmar economies, trade and foreign investments with updated statistical data. The implications for Korea is that recently Myanmar economy is in its early stages of development. Although it can occur huge demand of railway, road, communications and constructions related to social infrastructures essentially needed for development of a country, these sectors relatively need huge investments. On the other hands, textile and sewing industry relatively need smaller investments in which investors can utilize low labour cost and a position for export to third countries. But those firms which set up for those purpose in Myanmar might have trouble creating domestic markets in future. Moreover, due to demand which occur in the early stage of growth in Myanmar, trade volume tend to increase and trading is also possible to invest but Myanmar still have lots of problems with infrastructure such as road and logistics and we need to make pre-survey for the costs and benefits of our products Finally, Myanmar government is trying to promote and encourage some of industries such as export-oriented industry, import substitution industry and labour-intensive industry. It can also means they will accumulate capital which can be sources for Myanmar economic growth.

• Korean Journal of Environment and Ecology
• /
• v.32 no.3
• /
• pp.303-312
• /
• 2018

This study was conducted to investigate the relationship between the decrease of forest biomass by forest thinning and the change of temperature in the natural forest by measuring forest biomass and temperature before and after forest thinning in the Pusan National University forest where afforestation had been carried out. We intended to investigate the relationship between the forest biomass, estimated by calculating the Basal area, Crown area and Crown volume using the same formula to the same quadrat before and after forest thinning, and the forest temperature. Temperature measurement was carried out on April 20, 2016 through 28 before forest thinning, July 26, 2016 through November 4 around the time of forest thinning, and April 15, 2017 through May 8 after forest thinning. A temperature data logger was installed to point north at the height of 2.0 m above the ground in the center of the quadrat to record data every 10 minutes during the measurement periods. We used the AWS (Automatic Weather Station) data of the Dongnae-gu area located in the nearby city because it was difficult to set the control group since the whole forest was the subject to the forest thinning. The analysis of the relationship between forest biomass change and temperature showed that the change in temperature inside the forest was the greatest in the midday (12:00 - 15: 00) and was highly correlated with the Crown volume in the forest biomass. The temperature increase was much larger (average $1.91^{\circ}C$) 1 year after forest thinning than immediately after forest thinning (average $0.74^{\circ}C$). The comparison of the decrease rate of Crown volume and the increase in temperature showed that the Pitch pine community, which showed the highest decrease of Crown volume by 15.4%, recorded the highest temperature rise of $1.06^{\circ}C$ immediately after forest thinning and $2.49^{\circ}C$ 1 year after forest thinning. The Pitch pine-Korean red pine community, which showed the lowest Crown volume reduction rates with 5.0%, recorded no significant difference immediately after forest thinning but a temperature rise of $0.92^{\circ}C$ 1 year after forest thinning. The results confirmed that the decrease of forest biomass caused by forest thinning led to a rapid increase of the internal temperature. The fact that the temperature increase was more severe after 1 year than immediately after forest thinning confirmed that the microclimate changes due to the removed biomass cannot be recovered in a short time.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.4
• /
• pp.316-323
• /
• 2011

Purpose: The purpose of this study was to investigate the effect of different thread designs on the marginal bone stresses around dental implant. Materials and methods: Standard ITI implant(ITI Dental Implant System; Straumann AG, Waldenburg, Switzerland), 4.1 mm in diameter and 10 mm in length, was selected as control. Test implants of four different thread patterns were created based on control implant, i.e. maintaining all geometrical design of control implant except thread pattern. Four thread designs used in test implants include (1) small V-shape screw (model A), (2) large V-shape screw (model B), (3) buttress screw (model C), and (4) trapezoid screw (model D). Surface area for unit length of implant was 14.4 $mm^2$ (control), 21.7 (small V-shape screw), 20.6 (large V-shape screw), 17.0 (buttress screw) and 28.7 $mm^2$ (trapezoid screw). Finite element models of implant/bone complex were created using an axisymmetric scheme with the use of NISA II/DISPLAY III (Engineering Mechanics Research Corporation, Troy, MI, USA). A load of 100 N applied to the central node on the crown top either in parallel direction or at 30 degree to the implant axis (in order to apply non-axial load to the implant NKTP type 34 element was employed). Quantification and comparison of the peak stress in the marginal bone of each implant model was made using a series of regression analyses based on the stress data calculated at the 5 reference points which were set at 0.2, 0.4, 0.6, 0.8 and 1.0 mm from implant wall on the marginal bone surface. Results: Results showed that although severe stress concentration on the marginal bone cannot be avoided a substantial reduction in the peak stress is achievable using different thread design. The peak marginal bone stresses under vertical loading condition were 7.84, 6.45, 5.96, 6.85, 5.39 MPa for control and model A, B, C and D, respectively. And 29.18, 26.45, 25.12, 27.37, 23.58 MPa when subject to inclined loading. Conclusion: It was concluded that the thread design is an important influential factor to the marginal bone stresses.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.2
• /
• pp.168-176
• /
• 2011

Purpose: This study aims at investigating the influence of various insertion torques on thermal changes of bone. A proper insertion torque is derived based on the thermal analysis with two different implant designs. Materials and methods: For implant materials, bovine scapula bone of 15 - 20 mm thickness was cut into 35 mm by 40 - 50 mm pieces. Of these, the pieces having 2 - 3 mm thickness cortical bone were used as samples. Then, the half of the sample was immersed in a bath of $36.5^{\circ}C$ and the other half was exposed to ambient temperature of $25^{\circ}C$, so that the inner and surface temperatures reached $36.5^{\circ}C$ and $28^{\circ}C$, respectively. Two types of implants ($4.5{\times}10\;mm$ Br${\aa}$nemark type, $4.8{\times}10\;mm$ Microthread type) were inserted into bovine scapula bone and the temperature was measured by a thermocouple at 0.2 mm from the measuring point. Finite element method (FEM) was used to analyze the thermal changes at contacting surface assuming that the sample is a cube of $4\;cm{\times}4\;cm{\times}2\;cm$ and a layer up to 2 mm from the top is cortical bone and below is a cancellous bone. Boundary conditions were set on the basis of the shape of cavity after implants. SolidWorks was used as a CAD program with the help of Abaqus 6.9-1. Results: In the in-vitro experiment, the Microhead type implant gives a higher maximum temperature than that of the Br${\aa}$nemark type, which is attributed to high frictional heat that is associated with the implant shape. In both types, an Eriksson threshold was observed at torques of 50 Ncm (Br${\aa}$nemark) and 35 Ncm (Microthread type), respectively. Based on these findings, the Microthread type implant is more affected by insertion torques. Conclusion: This study demonstrate that a proper choice of insertion torque is important when using a specific type of implant. In particular, for the Microthread type implant, possible bone damage may be expected as a result of frictional heat, which compensates for initial high success rate of fixation. Therefore, the insertion torque should be adjusted for each implant design. Furthermore, the operation skills should be carefully chosen for each implant type and insertion torque.