• Journal of the Korean Data and Information Science Society
• /
• 제13권2호
• /
• pp.271-284
• /
• 2002

In this paper we consider the robust inference for the parameter of linear regression model based on weighted least squares. First we consider the sequential test of multiple outliers. Next we suggest the way to assign a weight to each observation $(x_i,\;y_i)$ and recommend the robust inference for linear model. Finally, to check the performance of confidence interval for the slope using proposed method, we conducted a Monte Carlo simulation and presented some numerical results and examples.

• Korean Journal of Mathematics
• /
• 제30권3호
• /
• pp.433-442
• /
• 2022

Let N^(q) be an arithmetic table of a negative exponent polynomial with q-commuting variables. We study sequential properties of diagonal sums of N^(q). We first device a q-coefficient table $\hat{N}$ of N^(q), find sequences of diagonal sums over $\hat{N}$, and then retrieve the findings of $\hat{N}$ to N^(q). We also explore recurrence rules of s-slope diagonal sums of N^(q) with various s and q.

• Tribology and Lubricants
• /
• 제30권5호
• /
• pp.284-290
• /
• 2014

The influence of round embossed surface on slider bearing characteristics and its load carrying capacity is discussed for thin film effect of embossed slider bearing. For the numerical computation of lubrication parameters such as pressure, load capacity and shear stress that are normalized and a Reynolds equation is used for the analysis of embossed slider bearing characteristics. For this purpose, the finite difference method of central difference scheme is used in this study. In a slider bearing with embossed form, several simulation parameters such as pressure, load capacity and shear stress of the bearing can be obtained according to independent parameters such as the slope of the slider bearing and number of embossing in the upper slider. Also this results can be summarized and be stored in sequential data file for latter analysis. After all, their distribution of the pressure and shear stress parameters can be displayed and be analyzed easily by using the developed program with matlab GUI technique. The independent parameters such as a number of embossing and a slope of the embossed surface slider are used for discussing simulation parameters of pressure distribution, shear stress and load carrying capacity of the round embossing. These study results reported in this paper should be applied to the other shaped slider bearing with a rectangular embossed surface or rectangular waved surface.

• Bulletin of the Korean Chemical Society
• /
• 제24권8호
• /
• pp.1207-1210
• /
• 2003

The effect of solvent structure on the slope in the plot of ln K vs. solute carbon number was examined. It was found that the free energy of methylene group transfer from the gas phase into a solvent was always negative and that the absolute magnitude of interaction free energy between the methylene group and the solvent was always larger than the absolute magnitude of cavity formation free energy of the methylene group in the solvent. Thus, the slope in the plot of ln K vs. solute carbon number was always positive and its value decreases with increase of solvent polarity since the cavity formation energy of the CH₂ unit increases with increase of solvent polarity while the dispersive interaction energy of the CH₂ unit is virtually invariant. We also examined the effect of sequential addition of CH₂ unit to a solvent molecule upon ln K for three homologous series of solvents: n-alkanes, n-alcohols, and n-nitriles. Characteristic trends in the plots of ln K vs. solvent carbon number were observed for individual solvent groups. A decrease of ln K with solvent carbon number was observed for n-alkanes. An abrupt increase in ln K followed by levelling off was observed for n-alcohols while a final slight decrease in ln K after an abrupt increase followed by rapid levelling off was noted for n-nitriles. All of theses phenomena were found related to variation in cavity formation energy. It was clearly shown that a structural change of a polar solvent by sequential addition of CH₂ units causes an abrupt polarity decrease initially, then gradual levelling off, and finally, conversion to a virtually nonpolar solvent if enough CH₂ units are added.

• 터널과지하공간
• /
• 제14권3호
• /
• pp.188-202
• /
• 2004

고준위폐기물의 처분개념 실증을 위해 원자력연구소부지 내에 지하연구시설을 건설하는 경우, 지표면지형의 변화, 두터운 풍화대의 존재가 예상된다. 본 연구에서는 부지 특성과 터널의 경사 및 터별의 크기에 따른 영향 분석과 함께 수백 m의 터널을 단계적으로 굴착하는데 따른 영향을 FLAC3D를 이용한 3차원 구조해석을 통해 분석하였다. 해석결과 굴착을 단계적으로 실시하는데 따르는 응력이나 변위분포에는 차이가 없는 것으로 나타났으며 이는 지하연구시설의 부근에서는 응력재분포에 의한 소성영역의 발생은 없기 때문이다. 최대 응력으은 5 ㎫로 압축응력이 작용할 것으로 예상된다. 최대응력은 터별의 끝 부분에서 20 m 전방으로 터별의 벽면에서 발생할 것으로 예상되며 터널 경사각이나 풍화대의 크기, 터널의 크기변화에 따른 터널에서의 응력과 변위분포 변화는 거의 없는 것으로 나타났다. 진입터널과 연구모듈의 교차지점에 대한 모델링 결과 응력비 K가 3인 경우 구조적으로 가장 취약한 지점에서의 안전계수가 3이상으로 나타난다. 본 연구를 통해 원자력연구소 내 예상 부지에 소규모 지하연구시설을 구조적으로 안전하게 건설하는 것이 가능함을 보일 수 있었다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제52권6호
• /
• pp.235-240
• /
• 2003

In this paper, we present the fabrication and the characteristic analysis of sequential lateral solidification(SLS) poly-Si thin film transistors(TFT's) with molybdenum gate for active matrix liquid displays (AMLCD's) pixel controlling devices. The molybdenum gate is applied for the purpose of low temperature processing. The maximum processing temperature is 55$0^{\circ}C$ at the dopant thermal annealing step. The SLS processed poly-Si film which is reduced grain and grain boundary effect, is applied for the purpose of electrical characteristics improvements of poly-Si TFT's. The fabricated low temperature SLS poly-Si TFT's had a varying the channel length and width from 10${\mu}{\textrm}{m}$ to 2${\mu}{\textrm}{m}$. And to analyze these devices, extract electrical characteristic parameters (field effect mobility, threshold voltage, subthreshold slope, on off current etc) from current-voltage transfer characteristics curve. The extract electrical characteristic of fabricated low temperature SLS poly-Si TFT's showed the mobility of 100~400cm$^2$/Vs, the off current of about 100pA, and the on/off current ratio of about $10^7$. Also, we observed that the change of grain boundary according to varying channel length is dominant for the change of electrical characteristics more than the change of grain boundary according to varying channel width. Hereby, we comprehend well the characteristics of SLS processed poly-Si TFT's witch is recrystallized to channel length direction.

• 식물병연구
• /
• 제21권4호
• /
• pp.268-272
• /
• 2015

마늘 세균점무늬병은 국내에서 제주지역 난지형 마늘에서 Pseudomonas syringae pv. morri에 의해 발생하는 세균병해로 주요 병해 중 하나이다. 본 연구는 자연로그를 취한 이항분산에 대한 관측분산의 회귀모델인 binary power law를 이용하여 포장 내 병 발생의 공간분포 특성을 분석하였다. 회귀식의 기울기(b) 값이 1.361로 기준치인 1보다 커 세균점무늬병은 공간적으로 집중분포하고 있었다. 축차표본조사법은 평균이병주율($p_m$)의 추정과 요방제수준($p_t$) 이상 또는 이하 여부를 판단할 수 있도록 개발하였다. 본 연구결과는 기존의 조사지점수 고정 조사 방법에 비해 조사비용 면에서 더 효율적인 동시에 조사결과의 정확도를 더 높일 수 있을 것으로 판단된다.

• 한국경영과학회지
• /
• 제22권4호
• /
• pp.71-80
• /
• 1997

In this paper, we consider with a market pioneering game among symmetric firms in highly competitive situation. To describe the puzzling situation of timing competition, we construct a dynamic game model and explore the equilibrium solution. As a result, we find a subgame perfect mixed strategy Nash equilibrium conceptually defined by 't$_{0}$ + .elsilon. equilibrium'. Our major finding s include : i) market entry will be occurred in sequential manner even though the condition of each firm is symmetric ii) the optimal timing of market pioneering will be advanced until almost all of the monopolist's profit is dissipated, iii) as the market position of the pioneer is stronger, the timings of the pioneer and the follower are separated, iv) and as the slope of the profit flow is steeper, the entry timing of the two players will be pooled together.

• 대한기계학회논문집
• /
• 제19권2호
• /
• pp.433-442
• /
• 1995

For the line search of a multi-variable optimization, an efficient algorithm is presented. The algorithm sequentially employs several polynomial approximations such as 2-point quadratic interpolation, 3-point cubic interpolation/extrapolation and 4-point cubic interpolation/extrapolation. The order of polynomial function is automatically increased for improving the accuracy of approximation. The method of approximation (interpolation or extrapolation) is automatically switched by checking the slope information of the sample points. Also, for selecting the initial step length along the descent vector, a new approach is presented. The performance of the proposed method is examined by solving typical test problems such as mathematical problems, mechanical design problems and dynamic response problems.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제51권6호
• /
• pp.229-235
• /
• 2002

This paper presents the fabrication of polycrystalline thin film transistor(TFT) using sequential lateral solidification(SLS) of amorphous silicon. The fabricated SLS TFT showed high Performance suitable for active matrix liquid crystal display(AMLCD). The SLS process involves (1) a complete melting of selected area via irradiation through a patterned mask, and (2) a precisely controlled pulse translation of the sample with respect to the mask over a distance shorter than the super lateral growth(SLG) distance so that lateral growth extended over a number of iterative steps. The SLS experiment was performed with 550$\AA$ a-Si using 308nm XeCl laser having $2\mu\textrm{m}$ width. Irradiated laser energy density is 310mJ/$\textrm{cm}^2$ and pulse duration time was 25ns. The translation distance was 0.6$\mu$m/pulse, 0.8$\mu$m/pulse respectively. As a result, a directly solidified grain was obtained. Thin film transistors (TFTs) were fabricated on the poly-Si film made by SLS process. The characteristics of fabricated SLS p -type poly-Si TFT device with 2$\mu\textrm{m}$ channel width and 2$\mu\textrm{m}$ channel length showed the mobility of 115.5$\textrm{cm}^2$/V.s, the threshold voltage of -1.78V, subthreshold slope of 0.29V/dec, $I_{off}$ current of 7$\times$10$^{-l4}$A at $V_{DS}$ =-0.1V and $I_{on}$ / $I_{off}$ ratio of 2.4$\times$10$^{7}$ at $V_{DS}$ =-0.1V. As a result, SLS TFT showed superior characteristics to conventional poly-Si TFTs with identical geometry.y.y.y.