• Korean Chemical Engineering Research
• /
• 제55권1호
• /
• pp.135-140
• /
• 2017

본 논문은 법과학 문서분야에서 가장 활발하게 논의되고 있는 주제 중 하나인 상대적 작성시기 판단에 관한 연구이다. 최근 문서 제작에 가장 많이 이용되는 토너 타입의 출력문자와 필기구류 기재문자의 교차 지점을 분광비교분석기 및 무한초점현미경을 이용하여 관찰하였다. 그 결과, 필기구류 종류에 따라 교차지점 형태를 분류할 수 있었고, 문자간 상대적 작성시기 판단에 관한 결과를 도출하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 A
• /
• pp.619-621
• /
• 2004

This paper presents the rapid and accurate algorithm for fault discrimination in transmission lines. When faults occur in transmission lines, fault discrimination is very important. If high impedance faults occur in transmission lines, it cannot be detected by overcurrent relays. The method using current and voltage cannot discriminate high impedance fault. Because of this reason this paper uses voltage and zero sequence current, and the proposed algorithm uses fuzzy logic method. This algorithm uses voltage and zero sequence current per period in case of faults. Single line ground fault and three-phase fault can be detective using voltage. Two-line ground fault and line to line fault and high impedance can be detected using zero sequence current. To prove the performance of the algorithm, it test algorithm with signal obtained from ATPDraw simulation.

• 대한전기학회논문지:전력기술부문A
• /
• 제52권2호
• /
• pp.114-120
• /
• 2003

According to the use of distribution automation systems, the function to find or to search a fault phase is necessary for automatic switches in a distribution substation. In this paper, two algorithms are developed to fine the fault circuit and the fault phase for the automatic switches in substation with ungrounded power system. One is the fault circuit searching method using the zero sequence voltage at the bus and zero sequence current of circuit current and the other is to find the fault phase using the line voltage and zero sequence current. The developed algorithms are tested in the case study simulations. An ungrounded power system is modeled by EMTP as a case study system. The developed algorithms are tested in the case study simulations and each shows correct results.

• 대한본초학회지
• /
• 제26권3호
• /
• pp.15-21
• /
• 2011

Objectives : The application of polymerase chain reaction (PCR) for the discrimination of the herbal medicine Leonuri Herba (Leonurus japonicus) was evaluated by the comparison of the DNA sequence with Lamiaceae herbal medicine. Method : Genetic analysis showed that phylogenetic tree and comparing sequences through the DNA analysis of rbcL (ribulose-1, 5-bisphosphatecarboxylase) region and trnL-F (tRNA-Leu, trnL-trnF intergeni cspacer, and tRNA-Phe) region of chloroplast DNA from six Lamiaceae sold in market. And we developed IMCF and IMCR primers in order to distinction Leonuri Herba in six Lamiaceae using rbcL and trnL-F sequences. Results : Genetic analysis showed that six Lamiaceae showed individual group on phylogenetic tree. PCR amplification product of Leonuri Herba and another five Lamiaceae were developed for amplification of a 281 bp sequence and the specific PCR amplification of a 460 bp sequence that was exclusive to Leonuri Herba was designed using IMCF and IMCR primers. Conclusion : PCR analysis based on the chloroplast DNA sequences allows the discrimination of Leonuri Herba-based medicine.

• BMB Reports
• /
• 제31권6호
• /
• pp.525-535
• /
• 1998

A critical step in the faithful translation of genetic information is specific tRNA recognition by aminoacyl-tRNA synthetases. These enzymes catalyze the covalent attachment of particular amino acids to the terminal adenosine of cognate tRNA substrates. In general, there is one synthetase for each of the twenty amino acids and each enzyme must discriminate against all of the cellular tRNAs that are specific for the nineteen noncognate amino acids. Primary sequence information combined with structural data have resulted in the division of the twenty synthetases into two classes. In recent years, several high-resolution co-crystal structures along with biochemical data have led to an increased understanding of tRNA recognition by synthetases of both classes. The anticodon sequence and the amino acid acceptor stem are the most common locations for critical recognition elements. This review will focus on acceptor stem discrimination by class II synthetases. In particular, the results of in vitro aminoacylation assays and site-directed and atomic group mutagenesis studies will be discussed. These studies have revealed that even subtle atomic determinants can provide signals for specific tRNA aminoacylation.

• 한국약용작물학회지
• /
• 제19권5호
• /
• pp.347-353
• /
• 2011

In this study, simple sequence repeat (SSR) analyses were utilized for evaluation of genetic diversity and discrimination of 17 accessions. Five cultivars, which were developed from Korea, and 12 foreign accessions, which were collected from China, Japan, Russia and USA, were evaluated by nine markers out of 22 SSR markers. A total of 39 alleles were detected, ranging from 2 to 8, with an average of 4.3 alleles per locus. The expected heterozygosity and PIC values were 0.627 and 0.553, with a range from 0.21 (GB-PG-078) to 0.76 (GB-PG-142) and from 0.19 (GB-PG-078) to 0.70 (GB-PG-142), respectively. Four makers out of nine SSR markers, GB-PG-026, GB-PG-043, GB-PG-142 and GB-PG-177, were selected as key factors for discrimination of Korean ginseng cultivars and foreign accessions. All of Korean ginseng cultivars and foreign accessions were individually by the combination of four SSR markers. Consequently, the SSR markers developed in this study may prove useful for the evaluation of genetic diversity and discrimination of Korean ginseng cultivars and foreign accessions.

• Journal of Plant Biotechnology
• /
• 제44권3호
• /
• pp.243-263
• /
• 2017

벼 품종의 DNA profiling을 위하여 SSR 마커를 활용하여 한국 벼의 품종판별 기술 확립을 위하여 국내에서 육성된 벼 243개 품종에 대하여 최종 선발된 7개의 SSR 마커(RM21, RM257, HsSSR01-52, RM333, RM580, RM1306, RM157)를 이용하여 판별하였다. 판별용으로 이용된 SSR 마커 7개의 총 대립인자 수는 130개였으며, 대립인자 수의 범위는 10 ~ 32개이었고, 평균 대립인자 수는 18.57이었다. PIC 값은 0.679 (HsSSR01-52) ~ 0.895 (RM333)의 범위이었으며, 평균 PIC 값은 0.774이었다. SSR 마커 7개의 조합으로 6단계의 판별을 통해 총 243개 품종 중 243개 모든 품종의 구별이 가능하였다. 이와 같은 결과, 본 연구에 이용된 SSR 7개 마커는 한국 벼 품종의 판별과 순도유지에 매우 효율적으로 이용할 수 있을 것으로 여겨진다.

• 원예과학기술지
• /
• 제30권3호
• /
• pp.278-285
• /
• 2012

춘란(Cymbidium goeringii)은 동북아시아에서 난류중에서 가장 잘 알려진 중요한 종이다. 본 연구에서는 8개의 simple sequence repeats(SSR) 마커(CG409, CG415, CG709, CG722,CG787, CG1023, CG1210, and CG1281)를 동시증폭할 수 있는 multiplex PCR 시스템을 개발하여, 춘란의 40품종에 대한 유전자형을 분석하하는데 활용하였다. 품종은 모든 품종은 서로 다른 복합 유전자형을 가졌으며, 개체간 평균 복합식별력은 $7.14{\times}10^{-10}$로 매우 높게 나타났다. 관찰 이형접합도(Ho = 0.466)는 한국 내 야생집단과 유사한 값(동해안: 0.438, 서해안: 0.583)을 보였는데, 이 사실은 각 품종이 원래 야생에서 채집되어 품종으로 등록된 후 영양번식을 통해 번식을 하면서 유전적 본질이 변형되지 않았음을 의미한다. 본 연구에서 아울러 확립한 8개의 SSR 마커의 복합 유전자형을 이용하여 SSR DNA ID를 2차원 바코드로 표현하는 프로그램을 개발하였다. 복합 유전자형을 사용하여 개발된 개체별 고유 DNA ID의 개체 식별력은 통계적으로 99.999999% 이상이 되므로 높은 정확도로 개체간 구분이 가능해진다. 본 연구에서 개발한 SSR DNA ID와 2차원 바코드는 춘란 품종간 식별, 유지 등에 유용하게 활용될 수 있을 것이다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 A
• /
• pp.178-180
• /
• 2005

Recently, electrical demands increase rapidly in metropolitan areas according to the extension of urban areas. Therefore underground transmission lines are getting expanded. This paper presents the rapid and accurate algorithm for fault discrimination and fault location in underground transmission lines. This paper uses fuzzy logic method using voltage and zero sequence for fault discrimination. And this paper uses travelling wave and wavelet transform for fault location. To prove the performance of the algorithm, it test algorithm with signal obtained from ATPDraw simulation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전력기술부문
• /
• pp.350-352
• /
• 2005

Recently, electrical demands increase rapidly in metropolitan areas according to the extension of urban areas. Therefore underground transmission lines are getting expanded. This paper presents the rapid and accurate algorithm for fault discrimination and fault location in underground transmission lines. This paper uses fuzzy logic method using voltage and zero sequence for fault discrimination. And this paper uses travelling wave and wavelet transform for fault location. To prove the performance of the algorithm, it test algorithm with signal obtained from ATPDraw simulation.