• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.9
• /
• pp.3120-3137
• /
• 2021

Small-sized IoT wireless sensing devices can be deployed with small aircraft such as drones, and the deployment of mobile IoT devices can be relocated to suit data collection with efficient relocation algorithms. However, the terrain may not be able to predict its shape. Mobile IoT devices suitable for these terrains are hopping devices that can move with jumps. So far, most hopping sensor relocation studies have made the unrealistic assumption that all hopping devices know the overall state of the entire network and each device's current state. Recent work has proposed the most realistic distributed network environment-based relocation algorithms that do not require sharing all information simultaneously. However, since the shortest path-based algorithm performs communication and movement requests with terminals, it is not suitable for an area where the distribution of obstacles is uneven. The proposed scheme applies a simple Monte Carlo method based on relay nodes selection random variables that reflect the obstacle distribution's characteristics to choose the best relay node as reinforcement learning, not specific relay nodes. Using the relay node selection random variable could significantly reduce the generation of additional messages that occur to select the shortest path. This paper's additional contribution is that the world's first distributed environment-based relocation protocol is proposed reflecting real-world physical devices' characteristics through the OMNeT++ simulator. We also reconstruct the three days-long disaster environment, and performance evaluation has been performed by applying the proposed protocol to the simulated real-world environment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.4B
• /
• pp.338-348
• /
• 2009

The Wireless Sensor Network (WSN) has recently attracted considerable attention due to the low price and ease to deploy it. In particular, in a hostile or harsh regions where sensors cannot be deployed manually, WSNs can be established just by dropping sensors from the air. In this case, however, most likely sensors are not placed at optimal positions, although the location of sensors does have a drastic impact on the WSN performance. Moreover, randomized deployment algorithm can leave holes in terms of coverage in the sensing area. This paper proposes a sensor relocation scheme where mobile sensors move to patch up the holes by appropriate coverage. Simulation results show that the proposed algorithm outperforms prior existing schemes in terms of coverage and lifespan of WSNs.

• Journal of Internet Computing and Services
• /
• v.12 no.2
• /
• pp.47-53
• /
• 2011

When some sensors under Wireless Sensor Networks fail or become energy-exhausted, redundant mobile sensors might be moved to recover the sensing holes. Within rugged terrain where wheeled sensors are unsuitable, other type of mobile sensors, such as hopping sensors, are needed. In this paper, we address the problem of relocating hopping sensors to the detected sensing holes. Recent study for this work considered the relocation using the shortest path between clusters; however, the shortest path might be used repeatedly and create other sensing holes. In order to overcome the mentioned problem, we propose relocation schemes using the most disjointed paths or multi-paths. Simulation results show that the proposed schemes guarantee more balanced migration distributions of efficient sensors and higher movement success ratios of required sensors than those of the shortest path-based scheme.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.2
• /
• pp.205-210
• /
• 2017

Wireless sensor networks are useful to various unmanned monitoring application such as monitoring environments, surveillance system, unmanned space exploration, and so on. Due to the inappropriate placement of sensor nodes, there are some problems, for example, low connectivity and high overlapped sensing area. These problems can make it difficult for the data collection and lead to a waste of energy. In this paper, we propose a node relocating method to resolve the inappropriate placement of sensor nodes. Given monitoring area, we place sensor nodes randomly and find redundant nodes and move them to uncovered area. Through the simulation, We show that the proposed method is viable and efficient compared with the existing randomly locating method.

• Journal of information and communication convergence engineering
• /
• v.10 no.4
• /
• pp.365-371
• /
• 2012

In recent years, researchers have been attracted to clustering methods to improve communication and data transmission in a network. Compared with traditional wireless networks, wireless sensor networks are energy constrained and have lower data rates. The concept of implementing a clustering algorithm in an existing project on gateway relocation is being explored here. Low energy adaptive clustering hierarchy (LEACH) is applied to an existing study on relocating a gateway. The study is further improved by moving the gateway to a specific cluster based on the number or significance of the events detected. The protocol is improved so that each cluster head can communicate with a mobile gateway. The cluster heads are the only nodes that can communicate with the mobile gateway when it (the mobile gateway) is out of the cluster nodes' transmission range. Once the gateway is in range, the nodes will begin their transmission of real-time data. This alleviates the load of the nodes that would be located closest to the gateway if it were static.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2013.07a
• /
• pp.55-56
• /
• 2013

본 논문에서는 센서 클러스터에서 액터를 재배치하기 위하여 센서신호 공통 중첩영역을 추출하는 기법을 분석한다. 기존의 액터 재배치 알고리즘은 CH (Cluster Head)와 동일하게 센서들과 연결을 설정하고자 하는 액터를 CH가 있는 위치로 이동시킨다. 이러한 액터의 이동방법은 액터와 CH를 단순하게 결합하여 액터를 재배치하는 것이며, 액터와 CH가 서로 중첩되거나 충돌하는 문제점을 가지고 있다. 본 논문에서는 센서 클러스터에서 CH와 중첩 또는 충돌 없이 액터를 재배치하기 위해 센서신호 공통 중첩영역을 추출하는 기법을 제시한다.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.16 no.4
• /
• pp.9-17
• /
• 2020

When IoT sensor nodes are deployed in areas where data collection is challenging, sensors must be relocated if sensing holes occur due to improper placement of sensors or energy depletion, and data collection is impossible. The sensing hole's cluster header transmits a request message for sensor relocation to an adjacent cluster header through a specific relay node. However, since a specific relay node is frequently used, a member sensor located in a specific cluster area adjacent to the sensing hole can continuously receive the movement message. In this paper, we propose a method that avoids the situation in which the sensing hole cluster header monopolizes a specific relay node and allows the cluster header to use multiple relay nodes fairly. Unlike the existing method in which the relay node immediately responds to the request of the header, the method proposed in this paper solves a ping-pong problem and a problem that the request message is concentrated on a specific relay node by applying a method of responding to the request of the header using a timer. OMNeT++ simulator was used to analyze the performance of the proposed method.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2019.07a
• /
• pp.99-100
• /
• 2019

무선 센서 네트워크(Wireless Sensor Network, WSN)에서의 싱크 이동은 전력 문제와 관련하여 해결해야할 중요한 문제이다. 또한 고정된 싱크를 사용하면 노드의 과도한 에너지 소비로 인해 네트워크 성능이 저하될 수 있는 문제점이 있다. 본 논문에서는 센서 노드의 클러스터가 퍼지 로직(Fuzzy Logic)을 기반으로 형성되고 싱크 재배치가 동적 2단계 메커니즘을 사용하여 결정되는 에너지 효율적인 싱크 재배치 기법을 제안한다. 본 논문에서 제안하는 기법은 싱크 재배치에 필요한 통신 오버 헤드를 최소화하고 데이터 패킷의 손실이나 지연을 최소화하여 싱크 재배치를 허용한다. 시뮬레이션 결과 제안 기법이 기존의 WSN의 대표적인 싱크 재배치 기법보다 네트워크 수명과 처리량 측면에서 우수하다는 것을 확인할 수 있었다.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.3
• /
• pp.409-413
• /
• 2014

GIS partial discharge that occurred in the UHF band signal is effectively detected by the method to IEC60270 5pc the apparent minimum discharge can be detected over the GIS arrangement of the sensor interior and exterior of the UHF in accordance with the optimized position signal by considering the damping ratio is selected so that the signals can be obtained to be mounted. 362kV, 800kV GIS is installed on the internal and external sensors are UHF band signal attenuation is set by measuring the reference value, but the operation, 170kV case 362kV, 800kV on the basis of the measurement data and to be installed and operated. When 170kV per 1Bay by installing the built-in sensor 1 for detecting a partial discharge signal, But, GIS signal attenuation is large in the case of an internal partial discharge signal is not detected in some cases. Where the attenuation is great UHF signal of the sensor by increasing the quantity of partial discharge signals were acquired to allow relocation. The greater the spacing between the sensor and the sensor is applied simplifies the installation and reduces the cost in terms of maintenance of appropriate optimal position is calculated to detect the partial discharge signal is needed. Thus 170kV GIS signal power attenuation of a partial discharge by measuring the UHF sensor, and by relocating the proper position is calculated in accordance with the sensor signal decay rate and minimize the error of omission in detecting a partial discharge signal was optimized.

• Journal of Mechanical Science and Technology
• /
• v.20 no.10
• /
• pp.1691-1701
• /
• 2006

The scan type magnetic camera is proposed to improve the limited spatial resolution due to the size of the packaged magnetic sensor. An image of the scan type magnetic camera, ${\partial}B/{\partial}x$ image, is useful for extracting the crack information of a specimen under a large inclined mag netic field distribution due to the poles of magnetizer. The ${\partial}B/{\partial}x$ images of the cracks of different shapes and sizes are calculated by using the improved dipole model proposed in this paper. The improved dipole model uses small divided dipole models, the rotation and relocation of each dipole model and the principle of superposition. Also for a low carbon steel specimen, the experimental results of nondestructive testing obtained by using multiple cracks are compared with the modeling results to verify the effectiveness of ${\partial}B/{\partial}x$ modeling. The improved dipole model can be used to simulate the LMF and ${\partial}B/{\partial}x$ image of a specimen with complex cracks, and to evaluate the cracks quantitatively using magnetic flux leakage testing.