• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1998년도 제28회 추계학술대회
• /
• pp.11-16
• /
• 1998

Condition monitoring technique used in the military is JOAP, for which the spectroscopic analysis is applied. However it is known that the technique has some problems in economical and practical point of view. This study introduces a new technique for measuring wear in real time base and applies the technique to a high power semi-automatic transmission. The results show the feasibility by measuring the concentration of ferrous wear particles from the transmission oil.

• 한국컴퓨터정보학회논문지
• /
• 제22권6호
• /
• pp.69-77
• /
• 2017

The information related to legislation is massive, and it takes much time and effort to manually build the legislation ontology. Thus, studies on machine-based automated building methods are underway. However, the studies to automatically construct such systems focus on using TBox construction, and those based on automated ABox construction, which corresponds to instances, theoretical systems and data building cases, has not yet been sufficiently developed. Therefore, this paper suggests using a semi-automatic ABox construction method based on sentence patterns to automatically build the ontology for the legislation of the Republic of Korea. Precision and Recall experiments were conducted to further discuss the performance of the suggested method. These experiments provide a comparison between the manual classification, and the triples built by the machines of the legal information by assessing the corresponding numerical values.

• 산업공학
• /
• 제24권2호
• /
• pp.105-111
• /
• 2011

Measurement protocols for hand anthropometry have been studied for ergonomic product design. The present study developed a 3D semi-automatic measurement protocol (3D-SAMP) which semi-automatically measures various hand dimensions using a 3D scanner. The 3D-SAMP was compared with the conventional direct measurement method (DMM) to examine its effectiveness. The 3D-SAMP consists of (1) fabricating a plaster cast of the hand, (2) placing landmarks on the plaster hand, (3) scanning the plaster hand with a 3D scanner, (4) identifying automatically the positions of the landmarks on the digital hand, and (5) extracting automatically hand anthropometric measurements (lengths, widths, thicknesses, and circumferences). An evaluation experiment conducted in the study found the 3D-SAMP preferred to the DMM in terms of reliability (the number of dimensions exceeding the variability criteria SD=2 mm and CV=5% : 3D-SAMP =2 and DMM=24) and ease of measurement (3D-SAMP=5.2 and DMM=4.3 out of 7). The 3D-SAMP can be applied to ergonomic design of a hand-held product.

• 제어로봇시스템학회논문지
• /
• 제9권10호
• /
• pp.844-851
• /
• 2003

We introduces a development result of semi-automatic karyotyping system using image processing method to improve a long time working of the manual method and 5% error of traditional automatic karyotying system for analyzing karyotying. The karyotyping procedures have many routine tasks such as searching metaphases, taking pictures, developing, editing, etc. There are several automatic karyotyping systems in order to reduce the task in advanced countries. However, they are very expensive, applicable to only human chromosome, and have too many functions to use easily. This paper takes aim at high quality image resolution and development of interface that can adjust brightness and contrast of image on-line. The system can be applied to animal and plants as well as human's chromosome. The system developed in this paper is applied to pig and human. The effectiveness of the system is proved by hospitals in Korea.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.604-607
• /
• 2003

Most recommendation systems recommend the products or other information satisfying preferences of users on the basis of the users' previous profile information and other information related to product searches and purchase of users visiting web sites. This study aims to apply these application categories to e-mail more necessary to users. The E-Mail System has the strong personality so that there will be some problems even if e-mails are automatically classified by category through the learning on the basis of the personal rules. In consideration with this aspect, we need the semi-automatic system enabling both automatic classification and recommendation method to enhance the satisfaction of users. Accordingly, this paper uses two approaches as the solution against the misclassification that the users consider as the accuracy of classification itself using the dynamic threshold in Bayesian Learning Algorithm and the second one is the methodological approach using the recommendation agent enabling the users to make the final decision.

• 감성과학
• /
• 제11권2호
• /
• pp.207-214
• /
• 2008

직물의 결점은 원단손실을 가중시키기 때문에, 검단공정에서 결점부위를 제거한다. 실제공장에서 이뤄지는 검단공정은 육안판정방식과 전자동 방식 중 하나를 채택하는데, 두 방식 나름대로 장단점이 있다. 본 연구에서는 육안판정과 전자동 방식의 장점만을 모아 검출은 사람이 하지만, 결점위치 정보 제공 및 결점정보 기록을 컴퓨터가 하도록 반자동 검단기를 개발하였다. 본 연구에서 개발한 레이저 그리드는 결점의 위치를 검단자가 쉽게 파악하도록 돕는 역할을 하며, 야드미터는 자동으로 결점의 위치를 측정하는 역할을 한다. 컴퓨터는 야드미터로 측정된 직물의 길이와 사람이 검출한 결점의 위치정보를 받아들여 저장하고 직물의 결점정보를 한눈에 보여주는 역할을 한다. 실제 사용되는 직물을 대상으로 특정 패턴으로 재단했을 때의 손실률을 계산하여 개발된 시스템의 성능을 객관적으로 평가하였다.

• 인재니움
• /
• 제5권1호
• /
• pp.63-67
• /
• 1998

• 드라이브 ㆍ 컨트롤
• /
• 제17권1호
• /
• pp.37-43
• /
• 2020

An intelligent excavator can be divided into Machine Guidance (MG), semi-automatic, and unmanned by technology. The MG technology excavator is equipped with a tilt sensor on each link of the excavator and a GPS is installed on the excavator body to inform the user of the position of the excavator bucket end. Machine control (MC) technology that assists the user's work can be divided into semi-automatic and fully automatic technology. The semi-automatic MC equipment has already been commercialized by Komatsu and Caterpillar. The MC excavator is equipped with an electro-hydraulic system, sensors and controllers to control the excavator bucket end according to the user's needs. In this study, the semi-automated excavator modified based on manual excavator, is equipped with an electro-hydraulic system, a controller system, multi-sensors and a control algorithm is developed to assist in excavation work such as leveling and grading. By applying the developed technology, it was possible to confirm productivity improvement compared to manual digging and leveling work. In the future, further research to improve the accuracy of the hydraulic precision control and collaborative work with heterogeneous construction equipment such as dump truck and automated collaboration tasks technology could be developed.

• 전자공학회논문지CI
• /
• 제39권2호
• /
• pp.54-63
• /
• 2002

최근 들어 인터넷 접속을 위하여 웹 접근이 가능한 개인 장치들이 점점 더 이용 가능해 짐에 따라 PDA나 셀룰러 폰과 같은 휴대 장치로부터 인터넷에 접속하는 사용자들이 증가하고 있다. 그러나 웹 상의 대부분의 페이지들은 적어도 640×480의 해상도를 가지는 컬러 모니터의 데스크탑 컴퓨터에 디스플레이하기 위해 제작되어, 충분한 표현 능력을 가지고 있지 않은 휴대 장치들에 동일한 내용의 웹 컨텐츠를 다르게 표현해야 할 필요가 요구되고 있다. 따라서 웹 컨텐츠와 휴대 장치들간의 이러한 문제를 해결하기 위하여 다양한 웹 트랜스코딩 기술이 제안되고 있다. 본 논문에서는 semi-automatic 웹 트랜스코딩 방법을 사용하여 실시간 정보를 위한 웹 트랜스코딩 시스템(웹 프리즘)을 제안한다. 본 논문에서 사용한 semi-automatic 트랜스코딩 방법은 모바일 사용자들이 웹 페이지의 레이아웃이 빈번하게 바뀌지 않는 제한된 범위의 웹 페이지에 접근하기 위한 좋은 방법으로 제공되며, 또한 웹 프리즘을 데스크탑 PC에서 구현하여 실험한 결과 PDA에서 좋은 품질의 문서를 생성하였다.

• 충청수학회지
• /
• 제21권2호
• /
• pp.247-257
• /
• 2008

In this paper, we show that for a semi-shift the analytic spectral subspace coincides with the algebraic spectral subspace. Using this result, we have the following result. Let T be a decomposable operator on a Banach space ${\mathcal{X}}$ and let S be a semi-shift on a Banach space ${\mathcal{Y}}$. Then every linear operator ${\theta}:{\mathcal{X}}{\rightarrow}{\mathcal{Y}}$ with $S{\theta}={\theta}T$ is necessarily continuous.