• 대한치과보철학회지
• /
• 제29권3호
• /
• pp.101-110
• /
• 1991

The purpose of this study was to compare the repaired joint strength among several edge profiles after denture repair. For this study, eight edge profiles were used for repair methods and five self-curing resin brands were used for repair materials. Break away loads were tested after 1 hr., 24 hrs. and 1 week. Instron was used for testing the transverse strength of repaired specimen. The results were as follows. 1. Repaired joint strength was about 35-65% of that of original specimen. 2. Joint strengths of round, inverse knife, inverse rabbit, lap ogee joint were higher tnan that of traditional simple butt joint 3. Joint strength of the simple butt joint was low significant. 4. Joint strengths after 1 hr. specimen were lower than those of 24 hrs. and 1 week specimens in joint strengths. 5. There were no significant differences between 24 hrs. and 1 week specimens in joint strengths. 6. It look more than 24 hours to gain satisfactory physical property after repairing the fractured denture base when self-curing resin was used for repair.

• Computers and Concrete
• /
• 제12권5호
• /
• pp.651-668
• /
• 2013

Concrete structures need repairing due to various reasons such as deteriorative effects, overloading, poor quality of workmanship and design failures. Cement based repair mortars are the most widely used solutions for concrete repair applications. Various factors may affect the bond strength between concrete substrate and repair mortars. In this paper, the effects of polymer additives, strength of the concrete substrate, surface roughness, surface wetness and aging on the bond between concrete substrate and repair mortar has been investigated. Full factorial experimental design is employed to investigate the main and interaction effects of these factors on the bond strength. Analysis of variance (ANOVA) under design of experiments (DOE) in Minitab 14 Statistical Software is used for the analysis. Results showed that the interaction bond strength is higher when the application surface is wet and strength of the concrete substrate is comparatively high. According to the results obtained from the analysis, the most effective repair mortar additive in terms of bonding efficiency was styrene butadiene rubber (SBR) within the investigated polymers and test conditions. This bonding ability improvement can be attributed to the self-flowing ability, high flexural strength and comparatively low air content of SBR modified repair mortars. On the other hand, styrene acrylate rubber (SAR) modified mortars was found incompatible with the concrete substrate.

• Clinics in Shoulder and Elbow
• /
• 제6권2호
• /
• pp.143-148
• /
• 2003

Objectives: To analyze the postoperative functional outcome of shoulder in patients with arthroscopically assisted repair of large to massive rotator cuff tears with or without acromioplasty and role of acromioplasty. Materials and Methods: From June 1996 to June 2002, twenty six patients with large to massive rotator cuff tears were undergone arthroscopically assisted repair. Mean follow up was over one year. Fourteen were male and twelve were female. Mean age was 51 years old(39-66). Mean duration was 9 months. Acromioplasty was done in 14 cases concomitantly. They were divided into two groups. Group I: arthroscopic cuff repair with acromioplasty(14 cases). Group II: arthroscopic cuff repair without acromioplasty(12 cases). Each shoulder was evaluated at preoperative and final follow-up with Visual Analogue Scale(VAS), University of Pennsylvania Patient self-assessment of pain, University of Pennsylvania Patient self-assessment of function, ASES standardized shoulder assessment form, Simple Shoulder Test, UCLA score and range of motion(ROM). We analyzed the differences between the two groups. Shoulder ROM and acromioplasty were determining factors. Statistics was tested by correlation analysis and repeated measure ANOVA test. Results: At the final follow up, functional outcome and pain were improved but they had no statistical significance between the two groups(p>0.05). Combined procedure, acromioplasty, didn't affect on VAS. UCLA score, University of Pennsylvania Patient self-assessment of pain, University of Pennsylvania Patient self-assessment of function, ASf:S standardized shoulder assessment form and Simple Shoulder Test(p>0.05). In group II, forward flexion and abduction were statistically improved at the final follow up than in group I(p<0.05). Conclusions: It appears that arthroscopic repair is satisfactory procedure in patients with large to massive cuff tears. Combined procedure, acromioplasty, doesn't affect on postoperative functional outcome of shoulder.

• ETRI Journal
• /
• 제32권4호
• /
• pp.642-644
• /
• 2010

With the rapid increase occurring in both the capacity and density of memory products, test and repair issues have become highly challenging. Memory repair is an effective and essential methodology for improving memory yield. An SoC utilizes built-in redundancy analysis (BIRA) with built-in self-test for improving memory yield and reliability. This letter proposes a new heuristic algorithm and new hardware architecture for the BIRA scheme. Experimental results indicate that the proposed algorithm shows near-optimal repair efficiency in combination with low area and time overheads.

• The Journal of Advanced Prosthodontics
• /
• 제9권4호
• /
• pp.257-264
• /
• 2017

PURPOSE. To evaluate the adhesion to CAD/CAM feldspathic blocks by failure analysis and shear bond strength test (SBSt) of different restorative systems and different surface treatments, for purpose of moderate chipping repair. MATERIALS AND METHODS. A self-adhering flowable composite (Vertise Flow, Kerr) containing bi-functional phosphate monomers and a conventional flowable resin composite (Premise Flow, Kerr) applied with and without adhesive system (Optibond Solo Plus, Kerr) were combined with three different surface treatments (Hydrofluoric Acid Etching, Sandblasting, combination of both) for repairing feldspathic ceramics. Two commercial systems for ceramic repairing were tested as controls (Porcelain Repair Kit, Ultradent, and CoJet System, 3M). SBSt was performed and failure mode was evaluated using a digital microscope. A One-Way ANOVA (Tukey test for post hoc) was applied to the SBSt data and the Fisher's Exact Test was applied to the failure analysis data. RESULTS. The use of resin systems containing bi-functional phosphate monomers combined with hydrofluoric acid etching of the ceramic surface gave the highest values in terms of bond strength and of more favorable failure modalities. CONCLUSION. The simplified repairing method based on self-adhering flowable resin combined with the use of hydrofluoric acid etching showed high bond strength values and a favorable failure mode. Repairing of ceramic chipping with a self-adhering flowable resin associated with hydrofluoric acid etching showed high bond strength with a less time consuming and technique-sensitive procedure compared to standard procedure.

• Composites Research
• /
• 제28권6호
• /
• pp.395-401
• /
• 2015

본 연구에서는 자가손상보수에 적용되는 Grubbs' catalyst의 열안정성과 자가치료제와의 반응성을 조사하였다. 이를 위해 제조사에서 공급된 4종류를 고려하였으며 제조사에서 공급받은 상태와 기계적으로 분쇄시킨 상태로 시험하였다. 자가치료제는 Dicyclopentadiene (DCPD)과 5-ethylidene-2-norbonene (ENB)을 적절한 비율로 혼합한 4종류를 고려하였다. 촉매의 열안정성을 조사하기 위해 시차주사 열량측정장치를 통해 온도에 따른 열흐름 변화를 측정하였다. 자가치료제와의 반응성을 평가하기 위해 촉매와 혼합된 자가치료제의 반응열을 측정하였다. 이때 촉매는 자가치료제와 반응할 때의 최대온도와 최대온도 도달시간을 고려하여 Fluka Chemika Grubbs' catalyst를 적용하였다. 연구결과에 따르면 촉매는 제조사에 따라 다른 형상을 나타내며 입자의 크기가 작은 촉매가 자가치료제와 높은 반응성을 나타내었다. ENB의 혼합비가 높은 자가치료제가 촉매와 혼합되면 최대온도는 증가하고 최대온도 도달시간은 빨라졌다. 또한 촉매의 양이 많을수록 최대온도는 높아지고 최대온도 도달시간은 빨라졌다. 촉매의 열안정성과 자가치료제와의 반응성을 고려할 때 0.5 wt% 촉매와 D3E1 자가치료제가 자가손상보수를 위한 최적 조건임을 알 수 있었다. 마지막으로 노출된 분위기 온도에 따라 촉매에 열분해가 발생할 수 있기 때문에 촉매가 열안정성을 갖는 온도보다 높은 온도에 노출되지 않도록 하여야 한다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2002년도 학술.기술논문발표회
• /
• pp.23-27
• /
• 2002

Waterproofing is one of the important factor to improve performance of building elements. But existing repair system for waterproofing have many problems like a damage of waterproof layer due to movement of concrete substrate, blistering effect and moisture condition. So waterproofing layer can not play an important part to improve waterproofing function and performance of building. Therefore, new waterproofing system to solve these problems of existing waterproofing system is developed. In this paper, new waterproofing system in water-leakage repair for remodeling is introduced

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.309-312
• /
• 2004

The hydraulic structure of the hydroelectric power plant such as aqueduct tunnels and the drainage canal became old. Therefore, because the concrete surface of the aqueduct tunnel has received severe damage by wear-out and the crack etc the repair is demanded. This research examined the applicability of the repair mortar which mixed the fly ash and an artificial aggregate by using the very high early strength cement. As a result, good Quality repair mortar which satisfied the demand performance more than self-flow 270mm and compressive strength $50N/mm^2$ (age of 28days) adjusting of water cement ratio by using the MTX cement be able to be manufactured.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.626-629
• /
• 2004

Recently, the self-healing technique is being investigated to repair the damaged polymeric composites by the use of microcapsules with the healing agent. This technique can obtains both the damage detection and the damage repair simultaneously over the converntional repairing techniques. In this study, the effects of the catalyst ratio to the healing agent and thermal characteristics to the mixtures of healing agent are investigated through single lap shear tests and DSC. The Healing agents such as DCPD, ENB, and their mixtures are considered and Grubb's catalyst is used as a catalst.

• The Journal of Korean Physical Therapy
• /
• 제33권2호
• /
• pp.114-121
• /
• 2021

Purpose: This study examined the effects of therapeutic massage (TMP) and home exercise program (HEP) on pain, range of motion (ROM), depression, and quality of life (QOL) after arthroscopic rotator cuff repair in middle-aged women. Methods: Nineteen middle-aged women who underwent arthroscopic rotator cuff repair were enrolled in the study. All subjects were assigned randomly to the experimental group (n=9) or the control group (n=10). The subjects in both groups performed HEP for 30 minutes, three times per day, for eight weeks. The subjects in the experimental group also performed HEP, with TMP being performed for 30 minutes, 16 sessions for eight weeks. All subjects were evaluated with a visual analogue scale (VAS), shoulder ROM, self-rating depression scale (SDS), and Korean brief version of WHO quality of life scale (WHOQOL-BREF). A paired t-test was performed to test the significant differences between before and after the intervention. An independent t-test was conducted to test the significant differences between the groups. Results: Following the intervention, both groups showed significant differences than before the intervention in the VAS, shoulder ROM, SDS, and WHOQOL-BREF (p<0.05). There were significant differences in the ROM of shoulder flexion, SDS, and WHOQOL-BREF between the groups (p<0.05). Conclusion: These findings suggest that intensive TMP is an effective method for improving shoulder flexion mobility, depressive symptom, and QOL in middle-aged women after arthroscopic rotator cuff repair.