• Journal of Korean Clinical Nursing Research
• /
• v.23 no.2
• /
• pp.248-257
• /
• 2017

Purpose: This study was aimed to compare nursing competency, self-esteem, and job stress between floating nurses and clinical nurses. Methods: The data were collected between October $1^{st}$ and December $31^{st}$, 2015, from 43 floating nurses and 57 clinical nurses working at a tertiary care hospital in Seoul. The collected data were analyzed with SPSS/WIN 23.0, using descriptive statistics and the t-test, $x^2$ test, ANCOVA, ANOVA, $Scheffe{\acute{e}}$ test, Pearson correlation coefficients, and Stepwise multiple regression. Results: The nursing competency of clinical nurses was significantly higher than that of floating nurses (F=4.370, p=.039). For both floating and clinical nurses, nursing competency was positively correlated with self-esteem (floating nurses, r=.47, p=.002; clinical nurses, r=.62, p<.001). Also, For both floating and clinical nurses, the most significant predictor of nursi ng competency was self-esteem(floating nurses, ${\beta}=0.45$, p=.001; clinical nurses, ${\beta}=0.60$, p<.001). Conclusi on: Efforts are needed to increase the nursing competency of the floating nurse through the improvement of the floating system, the nursing work environment, and continuous education. Also, as self- esteem is the most effective predictor of nursing competence, nursing intervention is needed to improve self-esteem of the floating nurse.

• The Korean Journal of Pesticide Science
• /
• v.10 no.1
• /
• pp.28-35
• /
• 2006

This study was conducted to optimize formulation factors of a self-dispersible floating granule of flucetoaulfuron that can be used at a low application volume (5 kg $ha^{-1}$). SPA and xanthan gum were selected as a binder because blending of them showed good granulation and floatation. Potassium chloride selected as a filler also showed good granulation, floatation and disintegration properties. Among wetters and dispersants, Surfynol 440 gave the best dispersibility The optimum granule size was determined to be 1.0 mm considering floating time and dispersibility. Flucetosulfuron was mixed with the blend of SPA and xanthan gum, potassium chloride, and Surfynol 440 and formulated as a floating self-dispersible granule at 1.0 mm in diameter. Indoor and outdoor field experiments showed that the floating granule of flucetosulfuron performed well, covering long range from the application spot up to 15 m in weed control. Therefore, this floating technology may be used for laborsaving herbicide formulation development and help to reduce workloads for herbicide application.

• Journal of the Society of Naval Architects of Korea
• /
• v.54 no.2
• /
• pp.90-95
• /
• 2017

In case of working for the construction of blocks of any ship in a floating dry dock, there may exist deflection in the pontoon deck of the floating dock due to the ballast loading and the self weight of the ship and the floating dock. This paper is on the development of the measuring system and the GUI program to show the real time variation of the deflections at even-spaced positions by several pressure gages and the calculated inclination of the floating dock. The measured and calculated data produced by this developed system could be used to prepare the protection plan on site like ballast adjustment to ensure the safety of working during the floating dock operation.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.4 no.2
• /
• pp.61-67
• /
• 2001

Development of a barrier system for floating debris at river is introduced. The system is to prevent pollution of coastal water caused by marine debris which originates from land. The system consists of harrier boom, mooring system and boom winder. The harrier boom, which is self-inflatable with circular band spring, guides floating debris to a collecting conveyer system. Design parameters of the harrier system were reviewed and its design criteria were established. Based on the established design criteria, a pilot harrier system was built and tested at Tanchon branch of the Han river. It is proved that the suggested system is very efficient to collect floating debris at river.

• Journal of Navigation and Port Research
• /
• v.36 no.2
• /
• pp.113-121
• /
• 2012

According to the climate change and the improvement of income level, floating building on water has been emerging as a strong alternative. This study was intended to suggest some reference materials of sustainability for new floating building projects. The concept of sustainability and floating building was investigated, and 3 realized projects and 3 planned projects were reviewed in terms of sustainability. Sustainable features of the sample projects can be summarized as recycled and relocatable usage, adoption of various renewable energy techniques, installation of self-supporting plant, application of modular system and others like new material & open layout. Sustainable features need to be developed more and more in detail and applied to many types of floating buildings.

• Journal of the Korean housing association
• /
• v.26 no.5
• /
• pp.97-104
• /
• 2015

This paper aims to discuss the concept of resilience in floating housing, to investigate the resilient features of floating houses & to review the possibility of floating housing as a new form of resilient living, and to suggest some reference ideas for the planning and design of floating housing projects. Resilient features of the floating house can be summarized as the buoyant characteristics for natural disasters, the easy employment & potential use of renewable and nearly self-sufficient energy systems in locations subject to limited energy sources, the movability, mobility, long life, water recycle system, prefabrication and modular construction with the potential for reduced environmental impact. Additional benefits include the potential for a peaceful and comfortable atmosphere due to direct connections with nature, good relationship with neighbors, a solid social spirit of unity, and sense of security. Considering the resilient features of floating house at a time of serious climate change requires a new paradigm, and floating/amphibious/floatable housing has great possibility as a new form of resilient living.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.11
• /
• pp.56-62
• /
• 1999

All the cells on the whole memory array or a block of the memory array in the Flash EEPROM's are erased at the same time using Fowler-Nordheim (FN) tunneling. some of the cels are often overerased since the tunneling is not a self-limited process. In this paper, the optimum doping concentration of the floating gate solve the overerase problem has been studied. For these studies, N-type MOSFETs and MOS capacitors with various doping concentrations of the gate polysilicon have been fabricated and their electrical characteristics have been measured and analyzed. As the results of the experiment, it has been found that the overerase problem can be prevented if the doping concentration of the floating gate is low enough (i.e. below $1.3{\times}10^{18}/cm^3$). It is because the potential difference between the floating gate and the source is lowered due to the formation of the depletion layer in the floating gate and thus the erasing operation stops by itself after most of the electrons stored in the floating gate are extracted. On the other hand, the uniformity of the Vt and the gm has been significantly poor if the coping concentration of the floating, gate is too much lowered (i.e. below $1.3{\times}10^{17}/cm^3$), which is believed to be due to nonuniform loss of the dopants from the nonuniform segregation in the floating gate. Consequently, the optimum doping concentration of the floating gate to suppress the overerase problem and get the uniform Vt and has been found to range from $1.3{\times}10^{17}/cm^3$ to $1.3{\times}10^{18}/cm^3$ in the Flash EEPROM.

• Journal of Navigation and Port Research
• /
• v.35 no.6
• /
• pp.515-522
• /
• 2011

This research is intended to suggest some reference materials for the future planning of floating hotel, by reviewing the concept of floating hotel and analyzing the realized and planned ones through the search of related documents and homepages. Floating hotel can be defined as a building for living/recreation/work/entertainment with floating system on water, but without navigation tool. In terms of sequence, the River Kawi Jungle Rafts Resort was built in 1976, Four Seasons Hotel in 1988, and Salt & Sill in 2008. Floating hotels are various in scale(height) and size(room numbers), and have basic, cultural, health & marina facilities. Architectural characteristics of sample facilities can be summarized as self-supporting of the facilities, environmentally friendly architectural planning, utilization of renewable energy, introduction of new plastic composite material, and provision of same view from all bedrooms by rotating the building.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.11a
• /
• pp.108-113
• /
• 2004

Marinas are often located in prime port side locations. hi Korea these locations are already developed and reclamation of the existing properties poses many difficulties and financial overhead. Also, to develop a standard marina in Korea with tide ranges up to 6 meters would require considerable dredging and reclamation works needing long lead times and large SOC costs. The Ocean Space's floating marina system is an independent offshore floating static level system that does not require fixed location breakwaters. The entire marina floats with the tide giving a calm consistent berthing condition for vessels irrespective of the surrounding tide and weather conditions. The floating marina system provides also for all of functions needed to marina comprising a breakwater to protect the vessels, the pontoon system to house the vessels, a dub house and retail tourism precinct, fuel reservoir and associated support facilities in a turn key self contained unit. The modular nature of the system will mean that initial demand can be met with simple units and then further modules can be added quite easily without the related expansion difficulties or infrastructure. This paper contains the main characteristics of the floating marina system and tire design process of the structure. The mooring, motion & stability analysis, the overall & local structural design and the mooring & anchor system design are introduced in this paper.

• ETRI Journal
• /
• v.26 no.6
• /
• pp.575-582
• /
• 2004

Fully-depleted silicon-on-insulator (FD-SOI) devices with a 15 nm SOI layer thickness and 60 nm gate lengths for analog applications have been investigated. The Si selective epitaxial growth (SEG) process was well optimized. Both the single- raised (SR) and double-raised (DR) source/drain (S/D) processes have been studied to reduce parasitic series resistance and improve device performance. For the DR S/D process, the saturation currents of both NMOS and PMOS are improved by 8 and 18%, respectively, compared with the SR S/D process. The self-heating effect is evaluated for both body contact and body floating SOI devices. The body contact transistor shows a reduced self-heating ratio, compared with the body floating transistor. The static noise margin of an SOI device with a $1.1\;{\mu}m^2$ 6T-SRAM cell is 190 mV, and the ring oscillator speed is improved by 25 % compared with bulk devices. The DR S/D process shows a higher open loop voltage gain than the SR S/D process. A 15 nm ultra-thin body (UTB) SOI device with a DR S/D process shows the same level of noise characteristics at both the body contact and body floating transistors. Also, we observed that noise characteristics of a 15 nm UTB SOI device are comparable to those of bulk Si devices.