• 한국작물학회지
• /
• 제47권2호
• /
• pp.123-126
• /
• 2002

Lipoxygenase might be associated with seed deterioration by catalyzing the incorporation of molecular oxygen into fatty acids and generating free radicals. This study was performed to determine whether seed lipoxygenase activity would alter soybean seed longevity. In this study, germination percentage of lipoxygenase-lacking cultivar Jinpumkong2 (lx1lx1lx2lx2lx3lx3) was lower than that of Taekwangkong (Lx1Lx1Lx2Lx2Lx3Lx3). Segregation ratio for the three lipoxygenase isozymes of the F2-derived from the cross between Taekwangkong and Jinpumkong2 was fitted to 9 (Lx1Lx2Lx3) : 3 (Lx1Lx2lx3) : 3 (lxllx2Lx3) : 1 (lx1lx2lx3), suggesting the tight linkage between the Lx1 and Lx2 loci. Germination percentages varied widely but not differed among lipoxygenase isozyme types of F$_3$ seeds before and after accelerated aging. Seed coat of Jinpumkong2 was damaged severely following accelerated aging, whereas that of Taekwangkong was not. Thus, seed of lipoxygenase-lacking soybean cultivar, Jinpumkong2 showed greater deterioration compared with that of the normal Taekwangkong. However, the presence or absence of lipoxygenase activity had no effect on soybean germination.

• Advances in concrete construction
• /
• 제5권6호
• /
• pp.587-611
• /
• 2017

This study focused on the influences regarding the use of polyepoxide-based polymer and silica fume (SF) on the fresh and hardened state properties of self-compacting lightweight concrete (SCLC) along with their impacts on electrical resistance and ultrasonic pulse velocity (UPV). To do so, two series of compositions each of which consists of twelve mixes, with water to binder (W/B) ratios of 0.35 and 0.4 were cast. Three different silica fume/binder ratios of 0, 5%, and 10% were considered along with four different polymer/binder ratios of 0, 5%, 10%, and 15%. Afterwards, the rupture modulus, tensile strength, 14-day, 28-day, and 90-day compressive strength, the UPV and the electrical resistance of the mixes were tested. The results indicated that although the use of polymer could enhance the passing and filling abilities, it could lead to a decrease of segregation resistance. In addition, the interaction of the SF and the polymeric contents enhanced the workability. However, the impacts regarding the use of polymeric contents on fresh state properties of SCLC were more prevalent than those regarding the use of SF. Besides the fresh state properties, the durability and mechanical properties of the mixes were affected due to the use of polymeric and SF contents. In other words, the use of the SF and the polymer enhanced the durability and mechanical properties of SCLC specimens.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2022년도 추계학술대회
• /
• pp.276-276
• /
• 2022

Wheat is one of the most widely grown food crops worldwide. Extreme precipitation and wind disturbances increased due to the abnormal climate, which resulted in increased lodging. Introduction of dwarf genes in wheat significantly increased lodging resistance and productivity in wheat breeding. In this study, we performed the genotyping of dwarfing genes between 'Keumkang' and 'Komac 5' ('Keumkang' mutant). In addition, we investigated the relationship between plant height and several phenotypic characters using F₂ segregation populations derived from crosses between the two varieties. There was no significant difference in phenotypic characters between the two varieties except for plant height. In the genotyping analysis using dwarfing genes, mutations of two dwarfing gene were found to be induced between the two varieties. The four genotypes of the F₂ populations from a crossing between 'Keumkang' and 'Komac 5' were used to compare and evaluate the effects of two dwarfing genes. Plants with two single mutant dwarfing gene and double mutant dwarfing gene revealed reduced plant heights than control plants by 4.5%, 6.9%, and 33.2%, respectively. The phenotype analysis showed that double mutant dwarfing gene affected wheat stem growth as the length decreases from the second node, resulting in decreased plant height. However, there were no significant differences in the agronomic traits between mutant plants and control plant. These results may provide novel information about the effect of double mutant dwarfing gene on plant height, and may help improve lodging tolerance and wheat yield.

• Molecules and Cells
• /
• 제25권3호
• /
• pp.417-427
• /
• 2008

Comparison of maps and QTLs between populations may provide us with a better understanding of molecular maps and the inheritance of traits. We developed and used two reciprocal $BC_1F_1$ populations, IP/DS//IP and IP/DS//DS, for QTL analysis. DS (Dasanbyeo) is a Korean tongil-type cultivar (derived from an indica x japonica cross and similar to indica in its genetic make-up) and IP (Ilpumbyeo) is a Korean japonica cultivar. We constructed two molecular linkage maps corresponding to each backcross population using 196 markers for each map. The length of each chromosome was longer in the IP/DS//IP population than in the IP/DS//DS population, indicating that more recombinants were produced in the IP/DS//IP population. Distorted segregation was observed for 44 and 19 marker loci for the IP/DS//IP and IP/DS//DS populations, respectively; these were mostly skewed in favor of the indica alleles. A total of 36 main effect QTLs (M-QTLs) and 15 digenic epistatic interactions (E-QTLs) were detected for the seven traits investigated. The phenotypic variation explained (PVE) by M-QTLs ranged from 3.4% to 88.2%. Total PVE of the M-QTLs for each trait was significantly higher than that of the E-QTLs. The total number of M-QTLs identified in the IP/DS//IP population was higher than in the IP/DS//DS population. However, the total PVE by the M-QTLs and E-QTLs together for each trait was similar in the two populations, suggesting that the two $BC_1F_1$ populations are equally useful for QTL analysis. Maps and QTLs in the two populations were compared. Eleven new QTLs were identified for SN, SF, GL, and GW in this study, and they will be valuable in marker-assisted selection, particularly for improving grain traits in tongil-type varieties.

• 한국결정성장학회지
• /
• 제10권1호
• /
• pp.17-22
• /
• 2000

수직보자력이 크고 CoCrPt에 비하여 noise 저감 효과가 큰 것으로 알려진 CoCrPtTa계 합금박막의 수직이방성을 더욱 개선하기 위해 Ti를 우선 증착하였다. 본 연구에서는 Ti 두께 변화에 따른 비교적 높은 수직보자력치를 보였던 $CoCr_{16.2}Pt_{10.8}Ta_4$Ti/glass 시편에서 자기적 특성과 자구형상의 변화를 살펴보았다. 또한 VSM(Vibrating Sample Magnetometer)을 이용하여 M-H loop를 측정하였으며 자구형상은 MFM(Magnetic Force Microscopy)로 관찰하였다. 육방정 Ti가 하지층으로서 우선증착되면 bare glass 직접 증착되는 경우보다 CoCrPtTa 자성층의 수직이방성에 현저한 향상을 가져왔으며 Ti의 두께가 두꺼울수록 c-축 배향성도 개선되었다. MFM 결과에 의하면 Ti두레가 20 nm에서 90 nm로 증가함에 따라 자구형상이 연속적인 stripe type에서 mass type으로 분절된 형태로 변하였다. 이는 Ti의 증착이 비자성 Cr 편석 거동에 영향을 미쳐 자화반전시 인접 columnar grain의 자화벡터들간의 상호교환작용을 억제하는 자기적 분리 효과에 기여했음을 의미한다. 아울러 이와 같은 거동은 Ti가 CoCr계 자성층의 수직이방성을 개선하는데 있어서 형상자기이방성적인 측면에서의 기여가 현저함을 의미하기도 한다.

• 콘크리트학회논문집
• /
• 제12권2호
• /
• pp.99-107
• /
• 2000

This research investigates experimentally an effect on the properties of the high flowing concrete to be poured in the under-ground slurry wall of Inchon LNG receiving terminal(#213,214-TK) according to variations of concrete materials. Variables for sensitivity test were selected items as followings. 1) Concrete temperature (3cases), 2) Unit water (5cases), 3) Fineness modulus of fine aggregate (5cases), 4) Particle size of lime stone powder (3cases), 5) Replacement ratio of blast-furnace slag (4cases) and 6) Addition ratio of high range water reducing agent (5cases). And fresh conditions of the super flowing concrete should be satisfied with required range including slump flow(65$\pm$5cm), 50cm reaching time of flow(4~10sec), V-lot flowing time(10~ 20sec), U-box height(min. 300mm) and air content(4$\pm$1%). As results for sensitivity test, considered flow-ability, self-compaction and segregation resistance of the high flowing concrete, material variations and conditions of fresh concrete should be satisfied with the range as follwings. 1) Concrete temperature are 10~2$0^{\circ}C$(below 3$0^{\circ}C$), 2) Surface moisture of fine aggregate is within $\pm$ 0.6%, 3) Fineness modulus of fine aggregate is 2.6$\pm$0.2, 4)Replacement ratio of blast-furnace slag is 45~50% and 5) Addition ratio of high range water reducing agent is within 1%. Based on the specification for quality control, we successfully finished concrete pouring on the under-ground slurry wall having 75,000㎥(#213,214-TK) and accumulated real date in site.

• Asian-Australasian Journal of Animal Sciences
• /
• 제24권9호
• /
• pp.1179-1183
• /
• 2011

The incidence of mutation in three loci of GDF9, BMP15 and BMP15-1B and their effects on litter sizes was evaluated in Baluchi sheep. Wild-type alleles were detected for BMP15 and BMP15-1B loci and all individuals were found to be as non-carriers for FecB and $FecX^G$ mutations but, a G to A nucleotide substitution was found in GDF9 locus. The frequency of $FecG^+$ (0.82) wild type allele was higher than the frequency of $FecG^l$ (0.18) mutant allele and the frequencies of $FecG^+/FecG^+$, $FecG^+/FecG^1$ and $FecG^1/FecG^1$ genotypes were 0.72, 0.20 and 0.08, respectively in GDF9 locus. The heterozygous ($FecG^+/FecG^1$) and homozygous ($FecG^+/FecG^+$) non-carrier ewes had 0.35 and 0.21 more lambs than the homozygous ($FecG^1/FecG^1$) carrier ewes, respectively (p<0.05). In addition to the finding of segregation of non-additive gene effect on litter size in the previous study in Baluchi sheep, these findings for the first time shows that the $FecG^1$ gene has a major effect on litter size in this breed.

• Journal of Welding and Joining
• /
• 제31권3호
• /
• pp.66-75
• /
• 2013

In this study, the effect of coating thickness($20{\mu}m$ and $30{\mu}m$) on microstructure and tensile properties in Yb:YAG disk laser welds of Al-Si-coated boron steel (1.2mmt) was investigated. In the case of as welds, the quantity of ferrite was found to be higher in base metal than that in HAZ (Heat Affected Zone) and fusion zone, indicating, fracture occurrs in base metal, and the fracture position is unrelated to the coating thickness. Furthermore, yield strength, tensile strength of base metal and welded specimens showed similar behavior whereas elongation was decreased. On the other hand, base metal and HAZ showed existence of martensite after heat treatment, the fusion zone indicated the presence of full ferrite or austenite and ferrite during heat treatment ($900^{\circ}C$, 5min), After water cooling, austenite was transformed to martensite, and the quantity of ferrite in fusion zone was higher as compared with in base metal, resulting in sharply decrease of yield strength, tensile strength and elongation, which leads to fracture occured at fusion zone. In particular, results showed that because the concentration of Al was higher in 30um coating layer specimen than that of 20um coating specimen, after heat treatment, producing a higher quantity of ferrite was higher after heat treatment in the fusion zone; howevers, it leads to a lower tensile property.

• 한국재료학회지
• /
• 제23권11호
• /
• pp.649-654
• /
• 2013

The effect of interstitial elements on the ductile-brittle transition behavior of austenitic Fe-18Cr-10Mn-2Ni alloys with different nitrogen and carbon contents was investigated in this study. All the alloys exhibited ductile-brittle transition behavior because of unusual low-temperature brittle fracture, even though they have a faced-centered cubic structure. With the same interstitial content, the combined addition of nitrogen and carbon, compared to the sole addition of nitrogen, improved the low-temperature toughness and thus decreased the ductile-brittle transition temperature (DBTT) because this combined addition effectively enhances the metallic component of the interatomic bonds and is accompanied by good plasticity and toughness due to the increased free electron concentration. The increase in carbon content or of the carbon-to-nitrogen ratio, however, could increase the DBTT since either of these causes the occurrence of intergranular fracture that lead to the deterioration of the toughness at low temperatures. The secondary ion mass spectroscopy analysis results for the observation of carbon and nitrogen distributions confirms that the carbon and nitrogen atoms were significantly segregated to the austenite grain boundaries and then caused grain boundary embrittlement. In order to successfully develop austenitic Fe-Cr-Mn alloys for low-temperature application, therefore, more systematic study is required to determine the optimum content and ratio of carbon and nitrogen in terms of free electron concentration and grain boundary embrittlement.

• 디지털융복합연구
• /
• 제14권12호
• /
• pp.495-501
• /
• 2016

영화는 항상 실재(reality)와 허구(imagination)를 바탕으로 시대의 문화를 반영해 왔으며 영화에서의 시각 효과는 주로 현실을 더욱더 현실감 있게 표현하거나 가상을 현실로 인식시켜주는 역할을 해 왔다. 본 연구는 환상적 사실주의가 갖는 이미지를 이창동 감동의 오아시스를 통해 내표된 의미와 그 작용에 대해 알아보았다. 환상적 사실주의는 이미지로서 영화내의 시간과 공간에 영향을 미치며 인간의 보고자 하는 욕망과 보이고자 하는 욕망을 거울이라는 이중적 의미의 도구를 사용하여, 현실과 상상의 공간을 분리하였다. 또 비둘기라는 매개를 통해 현실 세계에 재현되었다. 영화 내러티브 구조에서 가시화된 공간과 비가시회된 공간을 분리시키고, 현실과 비현실적 공간의 분리, 의식과 무의식의 공간의 분리, 현실과 현실공간을 권력 구조로 분리하여 사용되었다. 기술의 발전과 함께 황상의 이미지는 우리에게 더 실재처럼 다가오고, 이는 우리가 생각하지 못한 무의식의 공간을 표현해 낼 것이다.