• Journal of the Korean Institute of Landscape Architecture
• /
• v.48 no.5
• /
• pp.80-88
• /
• 2020

With the issuance of one-week fine dust emergency reduction measures in March 2019, the public's anxiety about fine dust is increasingly growing. In order to assess the application of air purifying plant-based bio-filters to public facilities, this study presented a method for measuring pollutant reduction effects by creating an indoor environment for continuous discharge of particle pollutants and conducted basic studies to verify whether indoor air quality has improved through the system. In this study conducted in a lecture room in spring, the background concentration was created by using mosquito repellent incense as a pollutant one hour before monitoring. Then, according to the schedule, the fine dust reduction capacity was monitored by irrigating for two hours and venting air for one hour. PM₁₀, PM_2.5, and temperature & humidity sensors were installed two meters front of the bio-filters, and velocity probes were installed at the center of the three air vents to conduct time-series monitoring. The average face velocity of three air vents set up in the bio-filter was 0.38±0.16 m/s. Total air-conditioning air volume was calculated at 776.89±320.16㎥/h by applying an air vent area of 0.29m×0.65m after deducing damper area. With the system in operation, average temperature and average relative humidity were maintained at 21.5-22.3℃, and 63.79-73.6%, respectively, which indicates that it satisfies temperature and humidity range of various conditions of preceding studies. When the effects of raising relatively humidity rapidly by operating system's air-conditioning function are used efficiently, it would be possible to reduce indoor fine dust and maintain appropriate relative humidity seasonally. Concentration of fine dust increased the same in all cycles before operating the bio-filter system. After operating the system, in cycle 1 blast section (C-1, β=-3.83, β=-2.45), particulate matters (PM₁₀) were lowered by up to 28.8% or 560.3㎍/㎥ and fine particulate matters (PM_2.5) were reduced by up to 28.0% or 350.0㎍/㎥. Then, the concentration of find dust (PM₁₀, PM_2.5) was reduced by up to 32.6% or 647.0㎍/㎥ and 32.4% or 401.3㎍/㎥ respectively through reduction in cycle 2 blast section (C-2, β=-5.50, β=-3.30) and up to 30.8% or 732.7㎍/㎥ and 31.0% or 459.3㎍/㎥ respectively through reduction in cycle 3 blast section (C-3, β=5.48, β=-3.51). By referring to standards and regulations related to the installation of vegetation bio-filters in public facilities, this study provided plans on how to set up objective performance evaluation environment. By doing so, it was possible to create monitoring infrastructure more objective than a regular lecture room environment and secure relatively reliable data.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.9
• /
• pp.486-491
• /
• 2017

The water discharged from sewage treatment plants has been considered to be useless, due to itslack of economic utility for small hydro power generation. Considering that most sewage treatment facilities have a water head of less than 2 meters and their flow rate is constant, it is necessary to develop a small hydro power generation device capable of maintaining stable power generation and efficiency. This paper presents the development of anintegrated small hydro power generation system and presents its performance evaluation and results. Then, the economics and use of the system for practical applications are suggested. As a result, it is foundthat the generator efficiency is 92%, the electric energy produced is 10kWh and the economic efficiency, as described by the B/C ratio,is 1.0 or more. Particularly, if the operating level of the generation device is maintained at 80% or more of the rated power, it is possible to secure its economic efficiency and, after 23 years, the investment cost will bereturned. The integrated hydro power generation device is expected to have a positive effect not only in terms of the water discharged from the sewage treatment plant, but also in terms of facilities capable of securing similar flow characteristics.

• KIPS Transactions on Computer and Communication Systems
• /
• v.5 no.10
• /
• pp.311-318
• /
• 2016

IoT(Internet of Things areas) rich information based on the user easy access to service creation must be one of the power system of specificity due following: The IoT spread obstacle to the act be, and 'Smart Grid information of this is not easy under power plants approach the Directive on the protection measures, particularly when stringent security policies IoT technologies applied to Advanced Metering Infrastructure sector has been desired. This is a situation that occurs is limited to the application and use of IoT technologies in the power system. Power Information Network is whilst closed network operating is has a smart grid infrastructure, smart grid in an open two-way communication for review and although information security vulnerabilities increased risk of accidents increases as according to comprehensive security policies and technologies are required and can. In this paper, the IoT platform architecture design of information systems as part of the power of research and development IoT-based energy information platform aims. And to establish a standard framework for a connection to one 'Sensor-Gateway-Network-platform sensors Service' to provide power based on the IoT services and solutions. Framework is divided into "sensor-gateway" platform to link information modeling and gateways that can accommodate the interlocking standards and handling protocols variety of sensors Based on this real-time data collection, analysis and delivery platform that performs the role of the relevant and to secure technology.

• The Journal of the Korea Contents Association
• /
• v.17 no.8
• /
• pp.463-471
• /
• 2017

Recently, the number of pet-owning households drastically increased and many people took their pets as lifelong companion animals and look after them like their children. Pet business has continued to increase gradually and the need for pet supplies has increased, too. Though there are a variety of pet supplies in pet dog market which takes up many parts in the pet market, there is no design guideline on pet supplies. Thus, there are many wrong pet supplies design created by wrong idea of people. Therefore, this study aims to suggest the guideline on pet supplies design focusing on the pet-monitoring system among the various pet products. So, the pet-monitoring robot was designed to monitor pet simply using smartphone anywhere on the trip and feed by using bowl that control the signal. This study figured out types and function of existing IP camera, reflected the behavior and physical characteristics of pets and suggested the design guideline which is minimum required as pet-monitoring products. Also, trial product for which design guide was applied was produced to observe the pet behavior and identify problems while operating trial product. However, there was limit in securing data and study period to examine the satisfaction of various pets since the subject of this study was dog and it's required to conduct follow-up study by observing continuously and improving the problems in future to secure more data.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.6
• /
• pp.694-700
• /
• 2018

Korea has disposed of medium and low level radioactive waste generated by operating nuclear power plants permanently through the radioactive waste repository located in Gyeongju. However, the maritime transport of radioactive waste is exposed to the risk of marine accidents, and it will be necessary to introduce a system to secure safety from the viewpoint of the function and role of the Korea Coast Guard. Especially, Korea is affected by large-scale marine accidents, such as the Hebei Spirit or Sewol accidents. From this point of view, we analyzed the current status of Korea radioactive waste shipping and examined the response systems of major foreign countries. As a result of examining major cases of accidents, we have operated an Emergency Towing Vessel (ETV) fleet centering on European countries in order to respond urgently to marine casualties that may have social, regional and international effects, such as accidents of similar nuclear material carriers and dangerous cargo ships. It proves a partial effect. Based on this, we propose the introduction of the Korean ETV System. In other words, it is necessary to respond to large-scale marine accidents that could lead to enormous environmental, property, and personal damage, such as marine accidents involving nuclear material ships, large oil tankers, and large passenger ships. For this, it seems necessary to introduce Korea ETV, which can carry out emergency towing, oil pollution control function, large - scale rescue equipment and manpower. This will lead to the enhancement of the Korea Coast Guard response to marine accidents, and will not miss the golden time of the initial response to the national disaster, which will help protect precious people, property and the environment.

• Journal of the Korean Institute of Gas
• /
• v.26 no.6
• /
• pp.30-36
• /
• 2022

In commercial transactions of energy sources using hydrogen charging stations, high-accuracy flow meters are needed to prevent accidents such as overcharging due to inaccurate measurements and to ensure transparency in hydrogen commercial transactions through accurate measurements. This research developed a Corioli-type flowmeter prototype and conducted a risk assessment to prevent accidents during a process change comparison experiment for existing charging stations to verify the measurement performance. A process change section was defined for the installation of measurement facilities for empirical experiments and HAZOP was conducted. In addition, JSA was also conducted to secure the safety of experimenters, such as preventing valve mis-opening during empirical experiments. Measures were established to improve the risk factors derived through HAZOP, and work procedures were established to minimize human errors and ensure the safety of workers through JSA. The design change and system manufacturing for the installation of the metering system were completed by reflecting the risk assessment results, and safety could be confirmed through the performance comparison test of the developed meter prototype. The developed prototype flow meter showed a total of 30 flow measurements under the operating conditions of 70 MPa, and the average error was -1.58% to 3.96%. Such a metering error was analyzed to have the same performance as a flow meter installed and operated for commercial use.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.317-321
• /
• 2022

In response to Incheon tap water accident in 2019, the Ministry of Environment has created the "Comprehensive Measures for Water Safety Management" to improve water operation management, provide systematic technical support, and respond to accidents. Accordingly, K-water is making a smart water supply management system for the entire process of tap water. In order to advance the response to water accidents, it is essential to secure the reliability of real-time water operation data such as flow rate, pressure, and water level, and to develop and apply a warning algorithm in advance using big data analysis techniques. In this paper, various statistical techniques are applied using water supply operation data (flow, pressure, water level, etc) to prepare the foundation for the selection of the optimal operating range and advancement of the monitoring and alarm system. In addition, the arrival time is analyzed through cross-correlation analysis of changes in raw water turbidity between the water intake and water treatment plants. The purpose of this paper is to study the model that predicts the raw water turbidity of a water treatment plant by applying raw water turbidity data considering the time delay according to the flow rate change.

• Information Systems Review
• /
• v.25 no.3
• /
• pp.179-197
• /
• 2023

As a sufficient workforce supports the industry's growth, workforce training has also been carried out as part of the industry promotion policy. However, the market still has a shortage of skilled mid-level workers. The information security disclosure requires organizations to secure personnel responsible for information security work. Still, the division between information technology work and job areas is unclear, and the pay is not high for responsibility. This paper compares job keywords in advertisements for the information security workforce for 2014, 2019, and 2022. There is no difference in the keywords describing the job duties of information security personnel in the three years, such as implementation, operation, technical support, network, and security solution. To identify the actual needs of companies, we also analyzed and compared the contents of job advertisements posted on online recruitment sites with information security sector knowledge and skills defined by the National Competence Standards used for comprehensive vocational training. It was found that technical skills such as technology development, network, and operating system are preferred in the actual workplace. In contrast, managerial skills such as the legal system and certification systems are prioritized in vocational training.

• Journal of National Security and Military Science
• /
• s.15
• /
• pp.57-86
• /
• 2018

The ROKAF has been training for a number of exercise for victory in the war, but the lack of aviation ammunition has become a big issue every year. However, due to the limitation of defense resources, there are many difficulties in securing and stockpiling ammunition for the war readiness. Therefore, there is a need to find a way to secure aviation ammunition for war readiness in a more economical way, so In this study, we analyze the precedent research case and the case of the reduction of the purchase cost of weapon system of other countries, and then I have suggested a plan that is appropriate for our situation. As a result of examining previous research cases for this study, there were data that KIDA studied in 2012, Precision-guided weapons acquisition cost reduction measures pursued by US Air Force And the use of procurement agencies that are being implemented by NATO member countries. Based on this study, the following four measures were proposed to reduce the purchase cost of aviation ammunition. First, the mutual aid support agreement was developed to sign the ammunition joint operation agreement. Second, join the NATO Support & Procurement Agency (NSPA) Third, it builds a purchasing community centered on the countries operating the same ammunition Fourth, participating in the US Air Force's new purchase plan for ammunition and purchase it jointly. The main contents of these four measures are as follows. 1. the mutual aid support agreement was developed to sign the ammunition joint operation agreement. Korea has signed agreements on mutual logistics support with 14 countries including the United States, Israel, Indonesia, Singapore, Australia, and Taiwan. The main purpose of these agreements is mutual support of munitions and materials, also supporting the training of the peace time and promoting exchange and cooperation. However, it is expected that there will be many difficulties in requesting or supporting mutual support in actual situation because the target or scope of mutual aid of ammunition is not clearly specified. Thus, a separate agreement on the mutual co-operation of more specific and expanded concepts of aviation ammunition is needed based on the current mutual aid support agreements 2. join the NATO Support & Procurement Agency (NSPA) In the case of NATO, there is a system in which member countries purchase munitions at a low cost using munitions purchase agencies. It is the NATO Purchasing Agency (NSPA) whose mission is to receive the purchasing requirements of the Member Nations and to purchase them quickly and efficiently and effectively to the Member Nations. NSPA's business includes the Ammunition Support Partnership (ASP), which provides ammunition purchase and disarming services. Although Korea is not a member of NATO, NSPA is gradually expanding the scope of joint procurement of munitions, and it is expected that Korea will be able to join as a member. 3. it builds a purchasing community centered on the countries operating the same ammunition By benchmarking the NSPA system, this study suggested ways to build a purchasing community with countries such as Southeast Asia, Australia, and the Middle East. First, it is necessary to review prospectively how to purchase ammunition by constructing ammunition purchasing community centered on countries using same kind of ammunition. 4. participating in the US Air Force's new purchase plan for ammunition When developing or purchasing weapons systems, joint participation by several countries can reduce acquisition costs. Therefore, if the US Air Force is planning to acquire aviation ammunition by applying it to the purchase of aviation ammunition, we will be able to significantly reduce the purchase cost by participating in this plan. Finally, there are some limitations to the method presented in this study, but starting from this study, I hope that the research on these methods will be actively pursued in the future.

• Journal of the Society of Disaster Information
• /
• v.14 no.3
• /
• pp.238-246
• /
• 2018

Purpose: The purpose of this study is to examine the directions for establishing a disaster safety village in rural areas where damage from a similar type of disaster occurs repeatedly by conducting the consciousness survey targeting at experts and disaster safety officials in a local government. Method: The risks of disaster in rural areas were examined and the concept and characteristics of disaster safety village which is a measure on the basis of Myeon (township) among the measures of village unit were examined in order to carry out this study. In addition, opinion polling targeting at officials-in-charge in the local government and survey targeting at experts in disaster safety and building village were conducted. Based on the findings, the directions for establishing a disaster safety village that fitted the characteristics of rural areas were examined. Result: The officials-in-charge in the local government answered that rural areas have a high risk of storm and flood such as heavy snowing, typhoon, drought, and heavy rain as well as forest fire, and it is difficult to draw voluntary participation of farmers for disaster management activities due to their main duties. They also replied that active support and participation of residents in rural areas are necessary for future improvement measures. The experts mostly replied that the problem of disaster safety village project is a temporary project which has low sustainability, and the lack of connections between the central government, local governments and residents was stressed out as the difficulties. They said that measures to secure the budget and the directions of project promotion system should be promoted by the central government, local governments and residents together. Conclusion: The results of this study are as follows. First, a disaster safety village should be established in consideration of the disaster types and characteristics. Second, measures to secure the budget for utilizing the central government fund as well as local government fund and village development fund should be prepared when establishing and operating a disaster safety village in rural areas. Third, measures to utilize a disaster safety village in rural areas for a long period of time such as the re-authorization system should be prepared in order to continuously operate and manage such villages after its establishment. Fourth, detailed measures that allow residents of rural areas to positively participate in the activities for establishing a disaster safety village in rural areas should be prepared.