• 제목/요약/키워드: Secondary link

검색결과 118건 처리시간 0.03초

굴곡지형 안전주행시스템의 개발 (Development of Stable Traveling Systems for Stairs and Off-road)

  • 최중섭;전형규
    • 한국산업융합학회 논문집
    • /
    • 제12권3호
    • /
    • pp.129-135
    • /
    • 2009
  • This paper describes traveling systems consisting of one major-wheel and three minor-wheels attached to each tip of three spokes. A link of inter-axle plays an important role of the system. It connects secondary axle to the major wheel axle. Its length is determined to ascend stably various stairs. The systems was designed to mount a cart for carrying agricultural products. The systems was applied to ascend stairs, travel on sand and cross a obstacle, despite of simple design.

  • PDF

전기자동차 충전기용 2-Stage 자기유도 무선전력전송 시스템 (Two-Stage Inductive Power Transfer Charger for Electric Vehicles)

  • 김민중;주동명;안상준;이병국
    • 전력전자학회논문지
    • /
    • 제22권2호
    • /
    • pp.134-139
    • /
    • 2017
  • In this study, an inductive power transfer (IPT) charger for electric vehicles is proposed to improve the entire system efficiency and power density by eliminating the DC-DC converter in the secondary side. In the proposed IPT charger, the DC-link voltage is adjusted according to the coupling coefficient through cascade buck-boost converter in the front-end side, and the bridgeless rectifier performs the charging of battery. The control algorithm for the proposed IPT system is theoretically explained, and the validity of the proposed system is verified by informative simulation.

과전류 차단과 보호협조 성능이 향상된 한류형 COS 퓨즈링크 개발 (Development of Current Limiting COS Fuse Link with Improved Overcurrent and Protection Coordination performance)

  • 김윤현;김영주
    • 한국산학기술학회논문지
    • /
    • 제21권3호
    • /
    • pp.129-136
    • /
    • 2020
  • 컷아웃스위치(COS: Cut Out Switch 이하 COS)는 전력계통에서 수용가로 전력을 송배전하기 위해 사용되는 변압기의 입력단에 설치되어 사고전류로부터 변압기를 보호하기 위해 설치되는 보호장치이다. COS는 크게 퓨즈링크와 COS몸체 및 접속부로 구성되어 사고전류시 퓨즈링크의 엘리먼트가 용단되어 사고전류를 차단하는 역할을 한다. COS 퓨즈링크가 용단되어 발생하는 강력한 아크가 화염과 소음을 유발시켜 주변지역 거주자에게 불쾌감 및 공포감을 주며, 아크화염으로 인하여 주변기기의 2차 피해를 유발시킬 수 있다. 본 논문에서는 COS 동작 시 발생되는 아크와 소음 및 보호협조의 문제점을 해결하기 위해 폭발형이 아닌 한류형 COS 퓨즈를 개발하였다. 또한 과전류 차단 기능이 없는 한류형 퓨즈의 단점을 개선하기 위해 퓨즈 엘리멘트, 스트라이커와 COS 퓨즈금구 개발을 통하여 과전류 차단성능의 신뢰성을 향상시켰다. COS의 동작 특성 향상은 퓨즈 엘리멘트의 최적 형상 도출, 스트라이커의 원활한 동작을 위한 동작선의 재질과 두께 및 저항 산정, 그리고 스트라이커와 연계된 하부금구류의 구조 개선을 통하여 수행하였다. 본 연구에서 개발한 COS 퓨즈링크는 공인기관의 시험을 통하여 차단성능과 보호협조 성능을 검증하였다. 시험은 본 연구의 한류형 COS와 기존의 폭발형 비한류형 COS의 비교 시험으로 수행하였다.

초등학교 성교육 내용체계에 관한 연구 (A Study on Systematizing Contents of Sex Education in Elementary School)

  • 서동오;박영수
    • 한국학교ㆍ지역보건교육학회지
    • /
    • 제1권1호
    • /
    • pp.95-106
    • /
    • 2000
  • The purpose of this study was to be of use for the preparation of more desirable sex education system at elementary school, by making content analysis of the current textbooks related to sex education and surveying what opinions the persons concerned had about it. The purpose of this study were as follows; Elementary school textbooks were analyzed to find out what kind of sex education was included in them. And questionnaires on how to improve school sex education content were prepared, by which 207 male and female teachers were surveyed in the city of Paju and Koyang, Kyonggi province. The conclusions were as follows; 1. Content Analysis of Textbook Sex Education The content related to sex education was relatively much included in textbooks of the right life, morality and physical education. Although morality was a subject to be instructed for the third-grade students or older, elementary school students virtually received sex education from the first grade, as the right life and the joyful life were a subject for the lower-grade students, and this met the goal of sex education or the need of the times. However, sex education content leaned heavily toward family, family life or parental love. There was no mutual complement among subjects, and no link among grades, either. 2. Teacher Opinion on Sex Education Content for Each Grade When the subjects were asked about if sex education content was appropriate for each grade, they answered 20 items should be more emphasized and 6 items might be left out. And there were 6 items regarded by them as one that should be rearranged in consideration of grade. 3. The Ideal Opinion of Sex Education Content The following model could be recommended for elementary school sex education, which was designed to meet the objectives of school sex education as much as possible and to offer a systematic link among grades, based on the findings by textbook analysis and Questionnaire survey, and on elementary school sex education materials recommended by the Ministry of Education: The content selected for the first grade of elementary school was my body, cleanness of genitals, male-female cooperation, and family cooperation. For the second grade, the selected content was male-female physical difference, male female psychological difference, parental and I(origin of a birth). For the third grade, the selected things were important a body(cleanness of genitals), birth of a life, and male-female comprehension and cooperation. For the fourth grade, the selected things were physical development, management of genitals, physiology and management of menstruation, propagation and growth of organism, concern for the other sex, comprehension of and cooperation with the other sex, and prevention of sexual violence. Four the fifth grade, the selected things were secondary sex characteristic, physiology and management of menstruation, operation for phimosis, understanding of seminal emission, structure and function of the genital organs, birth and growth of a baby, television/sex information, and mass communications/sex information. For the sixth grade, the selected things were secondary sex characteristic, understanding of seminal emission, male-female cooperation, male and female role, male-female manners, mass communications/sex information, family and family life. Finally, what should be taught in sex education must be studied constantly, as it should be revised or supplemented periodically, according to student's sexual maturity or social, cultural changes.

  • PDF

연계형 풍력발전설비(225[kV], AC 링크방식)가 전력계통의 전원 품질에 미치는 영향에 관한 연구 분석 (Research on the Effect of Interconnected Distributed Wind Power Generation(225[kV], AC Link Method) on Power Quality in System)

  • 나채동;박중신
    • 조명전기설비학회논문지
    • /
    • 제24권6호
    • /
    • pp.147-153
    • /
    • 2010
  • 소규모 풍력 및 태양광설비가 기존의 배전계통에 연계되어 전압변동, 역률, 주파수, 고조파, 플리커 등의 전원품질 요소에 영향을 줄 것으로 우려하고 있다. 따라서 본 연구에서는 풍력발전설비(AC 링크방식)가 연계된 배전계통의 전력품질에 어떠한 영향을 줄 수 있는지에 대한 조사를 위하여 현재 운영 중에 있는 풍력발전설비의 전력변환장치 앞과 배전선로측 수용가 전원설비 2차측에 각각 전력품질 분석 장치를 설치하여 실측하고 풍력발전기가 가동과 정지 상태에서 배전선로측에 어떠한 영향을 주는지에 대하여 분석하였다. 분석결과 발전기가 가동 및 정지 시 전압변동이 0.34[%] 상승, 전류파형파고율 0.145 정도 상승, 위상차가 가동 중일 때 0.6[$^{\circ}$] 정도의 편차를 발생시켰다.

승압 초퍼 기능이 내장된 새로운 태양광 발전용 파워컨디셔너의 개발 (Development of Boost Chopper with Built New Renewable Energy in Grid-Connected Distributed Power System)

  • 문상필;이수행;김영문
    • 전기학회논문지P
    • /
    • 제63권4호
    • /
    • pp.361-367
    • /
    • 2014
  • This paper is related to a new solar power conditioner for a built-in step-up chopper function. In the first step-up chopper proposed solar PV power conditioner for mutually connected in series with the input voltage of the bypass diodes are respectively connected to the positive terminal should install the mutual boosting chopper diode connected in series with the boost chopper switching element between the two power supply and at the same time the first and the second was connected to a second diode and a resonance inductor and a snubber capacitor in series with each other. And the common connection point between the bypass diode and the step-up chopper and the step-up chopper diode common connection point of the switching elements of the input voltage was set to the boost inductor for storing energy. In addition, between the step-up chopper and the step-up chopper diode and a switching element of a joint connection point of the first auxiliary diode and the second common connection point of the auxiliary diode was provided, the resonance capacitor. Between the step-up chopper and the step-up chopper diode and a switching element of a joint connection point and the common connection point of the resonance inductor snubber capacitor and connecting the third secondary diode, between two power supply lines is characterized by configuring the DC link capacitor bus lines in parallel. Therefore, it is possible to suppress the switching loss through, DC link bus lines, as well as there could seek miniaturization and weight reduction of the power conditioner itself by using a common capacitor of the non-polar non-polar electrolytic capacitor having a capacitor, the service life of the circuit can be extended and it is possible to greatly reduce the loss can be greatly improve the reliability of the product and the operation of the product itself.

낮은 120Hz 출력 전류 리플을 갖는 역률개선 LED 구동 회로 (Power Factor Correction LED Driver with Small 120Hz Current Ripple)

  • 사공석진;박현서;강정일;한상규
    • 전력전자학회논문지
    • /
    • 제19권1호
    • /
    • pp.91-97
    • /
    • 2014
  • Recently, the LED(Light Emitting Diode) is expected to replace conventional lamps including incandescent, halogen and fluorescent lamps for some general illumination application, due to some obvious features such as high luminous efficiency, safety, long life, environment-friendly characteristics and so on. To drive the LED, a single stage PFC(Power Factor Correction) flyback converter has been adopted to satisfy the isolation, PFC and low cost. The conventional flyback LED driver has the serious disadvantage of high 120Hz output current ripple caused by the PFC operation. To overcome this drawback, a new PFC flyback with low 120Hz output current ripple is proposed in this paper. It is composed of 2 power stages, the DCM(Discontinuous Conduction Mode) flyback converter for PFC and BCM(Boundary Conduction Mode) boost converter for tightly regulated LED current. Since the link capacitor is located in the secondary side, its voltage stress is small. Moreover, since the driver is composed of 2 power stages, small output filter and link capacitor can be used. Especially, since the flyback is operated at DCM, the PFC can be automatically obtained and thus, an additional PFC IC is not necessary. Therefore, only one control IC for BCM boost converter is required. To confirm the validity of the proposed converter, theoretical analysis and experimental results from a prototype of 24W LED driver are presented.

중대재해처벌법과 재해경감활동관리체계 연계방안 연구 - 중대산업재해 중심 (A Study on the Link between the Serious Accidents Punishment Act and the Enterprise Disaster Management Standard: Focused on the Serious Industrial Accidents)

  • 이병림;김상덕;최재욱
    • 한국재난정보학회 논문집
    • /
    • 제18권3호
    • /
    • pp.660-671
    • /
    • 2022
  • 연구목적: 중대재해의 업무중단 리스크를 확인하고, 재해경감활동관리체계를 활용한 중대재해처벌법 준수방안을 제시한다. 연구방법: 문헌연구와 사례조사를 통하여 중대재해처벌법, 재해경감활동관리체계, ISO 45001 각각의 요구사항과 특징을 비교 분석하고 시사점을 도출하였다. 연구결과: 산업재해로 인한 업무중단 및 재무적 악영향을 확인하였다. 이를 기반으로 재해경감활동관리체계를 활용하여 중대재해처벌법의 문서화 요구사항을 재해경감활동관리체계와 연계하고, 중대재해처벌법 의무 이행기록을 관리할 수 있는 방안을 도출하였다. 결론: 재해경감활동관리체계의 구축·운영으로 중대재해처벌법을 준수할 수 있을 뿐만 아니라, 각종 재해 예방 및 2차 피해 최소화 등을 통하여 업무연속성 유지와 ESG 경영에도 기여할 수 있다.

Accurate prediction of lane speeds by using neural network

  • Dong hyun Pyun;Changwoo Pyo
    • 한국컴퓨터정보학회논문지
    • /
    • 제28권5호
    • /
    • pp.9-15
    • /
    • 2023
  • 본 연구는 신경망을 이용하여 링크 속도로부터 각 차로의 속도를 예측하는 방법을 제시하였다. 예측 정확도를 높이기 위해 학습 데이터 구성에 있어 3가지 사항을 고려하였다. 첫 번째는 링크의 시작점과 끝점이 연결된 14개의 링크를 포함하여 데이터 소스의 공간적 범위를 확장하였다. 또한 시간 간격을 07:00에서 22:00로 늘리고 특성 데이터에 데이터 생성 시각을 포함했다. 마지막으로 요일과 공휴일을 표시했다. 실험 결과 직진 차로는 속도 오차가 6.4km/h에서 5.0km/h로 21.9%, 우회전은 8.5km/h에서 7.4km/h로 12.9%, 좌회전은 8.7km/h에서 8.2km/h로 5.7% 감소한 것으로 나타났다. 두번째 결과로 교통 정체시 도심부 도로의 차선별 예측 정확도가 높은 것을 확인하였다. 제안한 방법의 특징은 도로 소통 상황을 차로 단위로 예측하여 도로 소통 상황을 보다 정확하게 예측한 것이다.

상천이 필터를 이용한 싸이클로컨버터 출력의 개선 (An improvement of cycloconverter output using phase shifting filter)

  • 김종수;서동환;김정우;김성환
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제37권1호
    • /
    • pp.121-126
    • /
    • 2013
  • 교류기기의 속도 및 토크 제어시스템에서 전력변환장치로 사용되는 싸이클로컨버터는 저속에서 토크가 크고 제어가 간단한 장점을 가지고 있다. 또한, 정류기, 직류링크부, 인버터가 설치되지 않으므로 시스템이 간단하고 대전력 시스템에 적합하다. 현재 사용되고 있는 대형선박의 추진전동기의 구동용 전력변환장치를 싸이클로컨버터로 변경하면 시스템이 간단해지므로 설치비용을 크게 감소시킬 수 있다. 하지만 기존의 싸이클로컨버터는 전력 반도체소자의 고속 스위칭에 의한 손실이 크고 출력 전압파형이 왜곡되어서 고조파 성분이 증가하게 된다. 본 논문에서는 이러한 단점을 개선하기 위해서 1차측에 위상이 다른 2개의 입력단과 2차측에 1개의 출력단으로 구성되는 상천이 필터를 설치한다. 위상이 다른 2개의 전압파형이 더해져서 2차측으로 변압됨으로써 전압파형이 정현파에 가깝게 출력된다. 그로 인해 추진전동기에 입력되는 전압파형이 개선되고 총고조파왜형율도 크게 감소한다.